1977 Buick Riviera Performance and Racing Products
Find Your Specific 1977 Buick Riviera Performance and Racing Products
Below you will find various in-demand Buick Performance and Racing Products, components and accessories for your 1977 Riviera. Advance Auto Parts has popular Riviera parts like Performance Transmissions, Performance Distributors, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Riviera model years including
1990,
1991,
1992,
1993,
1995,
1996,
1997,
1998,
1999 and more. Select a category of 1977 Buick Riviera Performance and Racing Products below and start saving instantly.
Popular 1977 Buick Riviera Performance and Racing Products Categories
Essential Performance and Racing Products for 1977 Buick Rivieras
Edelbrock – TR1-Y Small Block Chevy Top Only Intake Manifold (Part No.7032)
from
$141.99
Intake manifold base only. Match with top. For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. Top has vacuum outlet for power brakes. Carburetor center-to-center dimensions 8.875 inch. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine.
Product Features:
See More
Product Features:
- Top Only-See PN[7119] for Complete-Bottom PN[7067]
- Use Where Low-End Torque is Not a Prime Factor
- Great For Engines w/Slightly Modified Heads
- Top Has Vacuum Outlet for Power Brakes
- Will Accept Forward and Sideways Mounted Carbs
- Carburetor Center-to-Center Dimensions 8.875 in
- HEI Ignition Will Not Clear Manifold
- For Street Mach.; Street Rods; Pro-Street; Marine
Accel – High Performance Ignition Module for GM HEI Distributors (Part No.35361)
from
$69.99
This high performance HEI module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM HEI for V8 engines with the 4 pin module 1974 thru 1985
Product Features:
See More
Product Features:
- Fits Most Stock And Modified Distributors
- Solid State Electronics
- Dwell Control Circuit
MSD Ignition – Distributor Cap and Rotor; GM HEI Distributor; Red (Part No.8416)
from
$46.49
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.
Product Features:
See More
Product Features:
- Designed w/Performance In Mind
- High Quality Material
- Stainless Terminals
- Performance replacement part
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
B & M – Tork Master 3000 (Part No.20402)
from
$499.99
Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)
from
$111.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
MSD Ignition – Rotor; GM HEI (Part No.8410)
from
$13.29
Replacement rotor for Chevrolet HEI style distributors.
Product Features:
See More
Product Features:
- For HEI distributors
- Resist carbon tracking
- Low resistance brass
- Max voltage transfer
- Molded from insulated material
Mr. Gasket – Water Neck (Part No.2557)
from
$27.49
Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.
Product Features:
See More
Product Features:
- Complete with o-rings and mounting bolts
- Features an o-ring style seal to prevent water leaks
- Chrome plated
- 1/2″ NPT port can be used for various coolant temp related sensors or switches
B & M – Automatic Shifter, Light Truck Megashifter (Part No.80680)
from
$479.99
The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat applications with its overall height of 14.85-inches tall (2.25-inches taller than #80690 Megashifter.) The positive ratcheting action won’t allow you to over-shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track, while the look and feel of the T-handle and accordion style shift boot really shows off its racing heritage. Other features include a black console that you can trim to match the contour of your vehicle’s floor, 5-foot long shifter cable, cable brackets, transmission shift levers, chrome plated top plate with lighted gear indicator and everything needed for an easy at home installation. An optional T-handle with a 12-volt button is available separately for actuating a trans-brake, nitrous oxide or other accessories for the hard-core performance enthusiast. This shifter fits most popular Chrysler, Ford and GM 3 and 4-speed automatic transmissions. Note: AOD transmissions require optional kit #40496, GM 4L60E through 4L85E transmissions with PRNDL switch will require optional kit #70499. Overall Dimensions – 14.9L x 6.4W x 14.8H
Product Features:
See More
Product Features:
- Universal Floor Mount Application
- Cable Operated
- Quick Installation
- Accurate Shifting
- NHRA/IHRA Reverse Lockout Meets Requirements
- Use w/Reverse Pattern Valve Body
- Includes Neutral Safety Switch
- Includes Backup Light Switch
Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)
from
$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1000)
from
$59.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)
from
$40.99
Brake Bleeder Screws
MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)
from
$49.49
The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.
Product Features:
See More
Product Features:
- Stock GM HEI replacement distributor cap
- Red
Mr. Gasket – Oil Pan Bolt Kit (Part No.6088)
from
$18.99
Oil Pan Bolt Kit
Edelbrock – Concealed Nitrous Kits for Carbureted Applications (20-30 Hp) (Part No.70027)
from
$320.99Product Features:
- Easily Concealable
- Install In Minutes
- Quick Removal
- No Obvious Signs Of Installation
- No Obvious Signs Of Use
Edelbrock – Universal Performer Dry to Wet Nitrous Oxide System Conversion Kit (Part No.71883)
from
$226.99
Product Features:
See More
- Dry To Wet Conversion System
- Hose Included
- Includes Fittings
- Includes Solenoid
- Includes All Necessary Installation Items
Competition Cams – Thumpr 226/241 Hydraulic Flat Cam (Part No.42-600-5)
from
$324.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Motive Gear – Differential Mini Spool (Part No.MS7.5-26)
from
$98.99
Motive Gear Mini-Spools replace your stock spider and side gears with a solid billet mini-spool for 100% traction to both wheels. Not recommended for street applications.
Product Features:
See More
Product Features:
- Billet construction
- Not recommended for street applications
- GM7.5″ MINI SPOOL 26 SPLINE
Mallory – Distributor Wiring Harness (Part No.29349)
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)
from
$100.99
Product Features:
See More
- Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
- Set of 16
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
Richmond Gear – RngPnn (Part No.69-0322-1)
from
$350.99
RngPnn
MSD Ignition – High Energy Ignition Coil for GM HEI Distributors (Part No.8225)
from
$112.99
HEI owners now have a choice to replace their stock coil with the MSD high energy unitized coil for GM HEI distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI module, PN 83645. The coil features special low induc?tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.
Product Features:
See More
Product Features:
- Direct performance replacement for GM HEI coil-in-cap dist.
- 70:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module
PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)
from
$26.99
Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.
Product Features:
See More
Product Features:
- PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
- Precision machined chromoly weights and center plate.
Mr. Gasket – Differential Cover Kit (Part No.9896)
from
$64.99
The Mr. Gasket chrome plated rear end cover is made from heavy-gauge steel and comes complete with bolts and gaskets.
Product Features:
See More
Product Features:
- Chrome plated steel for looks
- Includes bolts and gasket
B & M – Transpak For 65-87 TH400 Transmission (Part No.20228)
from
$141.99
The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.
Product Features:
See More
Product Features:
- Recalibrate Auto. Transmission
- Optimum Performance
- Select Your App. Mode
- Improves Transmission Life
- Trans. Removal Not Required
- Downshift At Any Speed
- Great For Trailer Towing
- For Heavy Loads Driving Downhill
Edelbrock – Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)
from
$451.99
The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
B & M – Transmission Kit, Master Overhaul Kit For TH400 (Part No.21041)
from
$409.99
These kits include all of the necessary components to rebuild your automatic transmission. OEM style gaskets included. Kits do not include overhaul instructions – please refer to factory shop manual for proper assembly procedures.
Product Features:
See More
Product Features:
- Complete High Perf. Or Racing Trans. Overhaul
- Includes Only OEM Valvebody Gaskets
- Instructions Not Included
Upgrade your 1977 Buick Riviera with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1977 Buick Riviera, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Performance and Racing Products are key to keeping your Riviera functioning at its best. At Advance Auto Parts, we offer a wide selection of 88 Performance and Racing Products for the 1977 Buick Riviera, designed to meet your needs without breaking the bank.
From
Performance Transmission
replacements to
Performance Distributors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1977 Buick Riviera at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $13.29 to $1,138.99, with
an average price of $339.42.
Our 88 Performance and Racing Products in stock come from 14 trusted brands, so you’re sure to find the right part for your 1977 Buick Riviera without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1977 Buick Riviera, we stock popular OEM and aftermarket Performance and Racing Products from top names
like MSD Ignition, Mr. Gasket, Accel, and more.
MSD Ignition Performance and Racing Products
start at just $13.29 and boast an impressive 4 stars average rating from customers.
Mr. Gasket and Accel also bring quality to the table, with Performance and Racing Products available starting at $17.49, and at an average 4 stars rating.
With 354 customer reviews and counting, our 1977 Buick Riviera Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1977 Buick Riviera is always ready to roll. We’re committed to providing you with everything you need to keep your Riviera in top shape, all in one place.
Start shopping confidently below for your 1977 Buick Riviera!
Best-Selling Performance Transmissions for 1977 Buick Rivieras
Enhance the driving experience in your Buick with 3 quality Performance Transmission components, starting at $141.99.
B & M – Transmission Kit, Master Overhaul Kit For TH400 (Part No.21041)
from
$409.99
These kits include all of the necessary components to rebuild your automatic transmission. OEM style gaskets included. Kits do not include overhaul instructions – please refer to factory shop manual for proper assembly procedures.
Product Features:
See More
Product Features:
- Complete High Perf. Or Racing Trans. Overhaul
- Includes Only OEM Valvebody Gaskets
- Instructions Not Included
B & M – Transpak For 68-81 TH 350 Transmission (Part No.30228)
from
$141.99
The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.
Product Features:
See More
Product Features:
- Recalibrate Auto. Transmission
- Optimum Performance
- Select Your App. Mode
- Improves Transmission Life
- Trans. Removal Not Required
B & M – Transpak For 65-87 TH400 Transmission (Part No.20228)
from
$141.99
The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.
Product Features:
See More
Product Features:
- Recalibrate Auto. Transmission
- Optimum Performance
- Select Your App. Mode
- Improves Transmission Life
- Trans. Removal Not Required
- Downshift At Any Speed
- Great For Trailer Towing
- For Heavy Loads Driving Downhill
Most Popular 1977 Buick Riviera Performance Distributors
Customize your Buick with 5 Performance Distributors products
like Performance Distributor Cap and Rotor Kits,
Performance Distributor Components, and
Performance Distributor Rotors, all
priced under $49.49.
PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)
from
$26.99
Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.
Product Features:
See More
Product Features:
- PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
- Precision machined chromoly weights and center plate.
MSD Ignition – Distributor Cap; GM HEI; Red (Part No.8411)
from
$49.49
The cap of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap. To make things easy, we now offer these caps as replacement kits.
Product Features:
See More
Product Features:
- Stock GM HEI replacement distributor cap
- Red
MSD Ignition – Distributor Cap and Rotor; GM HEI Distributor; Red (Part No.8416)
from
$46.49
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.
Product Features:
See More
Product Features:
- Designed w/Performance In Mind
- High Quality Material
- Stainless Terminals
- Performance replacement part
PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)
from
$30.99
Wiring Harness and CapacitorPremium quality wire harness and capacitor insure good connection and “static free” operation.
Product Features:
See More
Product Features:
- PerTronix D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor
- Premium quality wire harness and capacitor.
MSD Ignition – Rotor; GM HEI (Part No.8410)
from
$13.29
Replacement rotor for Chevrolet HEI style distributors.
Product Features:
See More
Product Features:
- For HEI distributors
- Resist carbon tracking
- Low resistance brass
- Max voltage transfer
- Molded from insulated material
Top Picks for 1977 Buick Riviera Performance Ignition Products
Upgrade Buick Rivieras with top-quality Performance Ignition Products parts, including 9 OEM and aftermarket selections for your 1977 model.
Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)
from
$100.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-31
- MSD 8225
MSD Ignition – High Energy Ignition Coil for GM HEI Distributors (Part No.8225)
from
$112.99
HEI owners now have a choice to replace their stock coil with the MSD high energy unitized coil for GM HEI distributors. This coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI module, PN 83645. The coil features special low induc?tance, high temperature windings which charge faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.
Product Features:
See More
Product Features:
- Direct performance replacement for GM HEI coil-in-cap dist.
- 70:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Full Power Sparks To 9000 Rpm w/PN[83647] MSD HEI Module
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Accel – GM Hei Supercoil Red/White (Part No.140005)
from
$113.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Similar to Standard Motor Products SMP Dr-32
- Long Life And Great Looks
Accel – High Performance Ignition Module for GM HEI Distributors (Part No.35361)
from
$69.99
This high performance HEI module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most GM HEI for V8 engines with the 4 pin module 1974 thru 1985
Product Features:
See More
Product Features:
- Fits Most Stock And Modified Distributors
- Solid State Electronics
- Dwell Control Circuit
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
MSD Ignition – Mod HEI Dust Cover, V8 & Odd Fire V6 (Part No.8401)
from
$72.99
Stock style replacement modified HEI coil dust cover. Used on 8 cylinder vehicles only.
Product Features:
See More
Product Features:
- Externally mounted coil
- Increases reliability
- Increase performance
- High quality plastic
- Resist spark loss
- Use brass conductors
- Low resistance connections
- No modifications
Mr. Gasket – HEI Adjustable Vacuum Advance Kit – Includes weights, camplate, and bushings – Improve performance (Part No.6011)
from
$55.99
HEI Adjustable Vacuum Advance Kit – Includes weights, camplate, and bushings – Improve performance
In-Demand Performance Fuel Systems for 1977 Buick Rivieras
Select from 3 premium Performance Fuel Systems parts for your 1977 Buick Riviera, with prices ranging from $494.99 to $538.99.
Edelbrock – Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1411)
from
$494.99
The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Edelbrock – Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1400)
from
$498.99
The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Electric Choke Installed from Factory
- Smooth Secondary Transition
- Includes Only Timed Vacuum Port
- Includes EGR ; Fuel Vapor Outlet
Edelbrock – Performer 1412 Carburetor: 800 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1412)
from
$538.99
The Edelbrock 1412 Performer Series 800 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1412 Performer Series 800 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. Dyno tests proved that the EPS 800 carb outperformed a Holley #3310 carb out-of-the-box by 26 ft-lbs. of torque and 22 hp on a small-block Chevy engine equipped with an Edelbrock Performer RPM power package
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
- Can Easily Calibrate with Rods and Jets
Most Sold 1977 Buick Riviera Performance Engines
Explore our best-selling Buick parts for the 1977 Riviera among 17 OEM and aftermarket options starting from $25.99.
B & M – Tork Master 3000 (Part No.20402)
from
$499.99
Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
B & M – Tork Master 2400 (Part No.20404)
from
$339.99
Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Edelbrock – Performer Small-Block Oldsmobile 350 EGR Intake Manifold (Part No.3711)
from
$463.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)
from
$111.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Mr. Gasket – Water Neck (Part No.2557)
from
$27.49
Precision die cast, these water necks are first polished to a high luster, then chrome plated. Features an O-ring style seal to prevent water leaks. Comes with O-ring gasket and mounting bolts.
Product Features:
See More
Product Features:
- Complete with o-rings and mounting bolts
- Features an o-ring style seal to prevent water leaks
- Chrome plated
- 1/2″ NPT port can be used for various coolant temp related sensors or switches
Spectre – Water Neck; Olds (Part No.4733)
from
$26.99
Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.
Product Features:
See More
Product Features:
- Fits Oldsmobile 330, 350, 425 and 455 engines
- Chrome plated
- Bolts included
- Designed for OEM fit
- Easy to install
- O-ring/gasket not included
Mr. Gasket – Intake Manifold Bolts (Part No.957G)
from
$25.99
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes sixteen (16) 3/8 inch-16 x 1-1/4 inch bolts & washers
Product Features:
See More
Product Features:
- Zinc plated Grade 5 steel
- Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
- Ideal For Minimal Space
- 12-Point Head And Flange
- Zinc Plated For Protection
Mr. Gasket – Ultra Seal: Head Gasket (Part No.5788G)
from
$75.99
Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.230 inch, Compressed thickness 0.038 inch
Product Features:
See More
Product Features:
- Five layer (graphite core/perforated steel outer layers) composite construction
- Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
- Provides excellent stability, compressibility and high temperature endurance
- Coated with high temperature silicone to ensure sealing of engine fluids
- Will not brinell (indent) aluminum cylinder heads
- For high performance street, drag race and oval track use
- Compatible w/High Octane Fuel
- Compatible With Exotic Fuel
B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)
from
$299.99
Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
B & M – Holeshot 3600 (Part No.20425)
from
$825.99
HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- Dual Pattern Drive Lugs
- New Turbine Hub
- New Springs/Rollers In Stator
B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)
from
$665.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 3400-3800 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.42-222-4)
from
$548.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
B & M – Holeshot 2400 (Part No.20412)
from
$499.99
HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam (Part No.42-223-4)
from
$337.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Thumpr 226/241 Hydraulic Flat Cam (Part No.42-600-5)
from
$324.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)
from
$100.99
Product Features:
See More
- Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
- Set of 16
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
Top-Rated Performance and Racing Products Brands For Your 1977 Buick Riviera
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1977 Buick Rivieras. Below you’ll find some of our best rated Performance and Racing Products from MSD Ignition, Mr. Gasket, and Accel, and more. Performance and Racing Products from these brands that fit a 1977 Riviera start at just $13.29 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular MSD Ignition 1977 Buick Riviera Performance and Racing Products
When it comes to maintaining or upgrading your 1977 Buick Riviera, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. MSD Ignition ticks all of those boxes. We offer a wide selection of MSD Ignition Performance and Racing Products, specifically designed for the 1977 Buick Riviera. With over 5 MSD Ignition brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $13.29, with an average price of just $59.05. Plus, with over 51 customer reviews and an average rating of 4 stars, you can trust that our MSD Ignition Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Mr. Gasket 1977 Buick Riviera Performance and Racing Products
Mr. Gasket auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1977 Buick Riviera owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1977 Riviera, Advance Auto Parts carries a full inventory of 9 Mr. Gasket Performance and Racing Products. Plus you will be keeping your Buick in peak condition while saving money because prices on these Mr. Gasket Performance and Racing Products range from $17.49 to $75.99, plus, with more than 22 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
FAQs for 1977 Buick Riviera Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1977 Buick Rivieras?
Out of 88 Performance and Racing Products that fit 1977 Buick Rivieras, the following parts are the top sellers:
- High Performance 180 Degree Thermostat for Increased Flow (17360033) – $26.99
- Oil Pan Bolt Kit (17360377) – $17.49
- Thermocap Radiator Cap (10648825) – $48.09
What’s the price range for 1977 Buick Riviera Performance and Racing Products?
Performance and Racing Product prices for the 1977 Buick Riviera start at $13.29 and go up to $1,138.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1977 Buick Riviera?
The average price for Performance and Racing Products for the 1977 Buick Riviera is $339.42. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Buick Riviera model years?
What are the cheapest Performance and Racing Products for my 1977 Buick Riviera?
The cheapest 1977 Buick Riviera Performance and Racing Products we carry in stock are:
- Rotor; GM HEI (17350190) – $13.29
- Oil Pan Bolt Kit (17360377) – $17.49
- Intake Manifold Bolts (17360286) – $25.99
- High Performance 180 Degree Thermostat for Increased Flow (17360033) – $26.99
- Water Neck; Olds (22905408) – $26.99
What types of Performance and Racing Products do you sell for my 1977 Buick Riviera?
As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 1977 Buick Riviera:
Can I get help with 1977 Buick Riviera Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Performance and Racing Products and more.
What is your return policy for Buick Riviera Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Buick Riviera Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
