1977 BMW 530i Belts and Hoses

Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:

• Specifically-engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation – the leading cause of hose failure
• EPDM tube; synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
• Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
• Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: Gates recommends replacing clamps each time a new coolant hose is installed
• Caution: Do not use for fuel or oil transfer applications

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent spl

Product Features:

• Designed to meet OE specifications
• Not suitable for oil or heat transfer
• Meets SAE J20R4, Class D-2 requirements for improved service hoses
• This hose is designed to prevent splitting, ballooning, and elongation

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Specifically-engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation, the leading cause of hose failure
• Pre-shaped to fit and to ensure perfectly sealed conditions
• EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
• Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
• Caution: Do not use for fuel or oil transfer applications

Clamp – Hose

Hose Clamp

Hose Clamp

Vacuum Hose

Booster Vacuum Hose

Vacuum Hose

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

• Meets SAE J20R4, Class D-1 requirements
• Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
• Provides excellent protection against external elements

Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

• Reduces installation time.
• No cutting, refitting or adjusting the hose.
• Prevents leaks and comebacks from reusing old quick connectors and o-rings.
• Resistant to heat, salt, road debris, oil and other contaminants.

Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

• Reduces installation time.
• No cutting, refitting or adjusting the hose.
• Prevents leaks and comebacks from reusing old quick connectors and o-rings.
• Resistant to heat, salt, road debris, oil and other contaminants.

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

• Meets SAE J20R4, Class D-1 requirements
• Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
• Provides excellent protection against external elements

All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:

• OE-Equivalent.
• Direct fit for easy installation.
• Resistant against wear, oil and heat.
• Polyester fiber tensile members and a ribbed belt design.

The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

• OE-Equivalent.
• Direct fit for easy installation.
• Resistant against wear, oil and heat.

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

• Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
• Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
• Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
• Resists oil, heat, ozone, weather and aging for improved belt life
• Meets or exceeds SAE J636C specifications

Elaplast brand engine cooling products are designed and manufactured to exceed original equipment (OE) specifications and are engineered to operate in the highly-stressful environment of today’s higher performance cooling systems. The Elaplast line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.

Product Features:

• All cooling-water hose inner linings are resistant to electrochemical cracking
• high strength and resistance to oil, mud, salt, road debris, and ozone
• Resistance to distilled water and water ethylene glycol mixtures
• Resistance to air temperatures of up to 125C

The high quality VAICO Coolant Hoses protect the components in the water cooling circuit from corrosion. Thanks to the high-quality materials in accordance with OE, VAICO guarantees the best quality with an assortment of more than 1,000 Coolant Hoses. The Vaico line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.

Product Features:

• Quick, easy mounting: quick connector from German production
• All cooling-water hose inner linings are resistant to electrochemical cracking
• Material: according to OEM. (CR, AEM, HAT-ACM, FKM / VMO), fabric reinforcement Kevlar
• high strength and resistance to oil, mud, salt, road debris, and ozone
• Quality Assurance: Perform various tests, including endurance, cold fexibility and vacuum tests as well as leak and residue tests

Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:

• Direct OE replacement for European cars
• Integrated thermoplastic couplings and O-ring seals
• Designed to go directly from the shelf to the vehicle. No cutting is ever needed
• All cooling-water hose inner linings are resistant to electrochemical cracking
• high strength and resistance to oil, mud, salt, road debris, and ozone
• Resistance to distilled water and water ethylene glycol mixtures
• Resistance to air temperatures of up to 135C

Mackay utilizes leading edge rubber technology and compounds, supported by in-house processes from rubber mixing to final product. This ensures hoses are made to the strict specifications required for the advanced motor vehicles of the 21st century. In vehicles of today, a hose has to be designed to withstand the stresses of modern, more compact but powerful engines that run hotter and at a higher pressure. Other factors include smaller engine compartments with poor heat dissipation, aggressive coolant additives, and stray (electrochemical) current that may be conducting through the cooling system. In short, the smaller but more powerful engines of today work a lot harder than the larger engines that were standard before. More heat is generated, higher burst pressures are required in cooling system components, and hoses have to be made tougher to withstand these demands. Mackay’s research and development chemists have developed new rubber formulations and manufacturing processes that ensure Mackay hoses meet the greater wear and heat demands created by modern engines. Rubber compounds used in automotive hoses today are predominantly synthetic rubber formulation. All Mackay coolant hoses are made from EPDM compounds that are highly resistant to ozone attack. Hoses made from some other rubber compounds may be subject to ozone deterioration.

Product Features:

• Excellent resistance to high temperatures
• Resists chemical attack (oils, fuels etc.)
• Excellent Ozone resistance
• Good resistance to abrasion
• High resistance to vibration