1976 Volvo 242 Brake Parts

Essential 1976 Volvo 242 Brake Parts

Bosch – Booster Check Valve (Part No.N4030168919BOS)

Booster Check Valve

from

$14.44
Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket. 14mm thread
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.19-428)

Semi Loaded Disc Brake Caliper

from

$49.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

MTC – Brake Line Junction (Part No.N308440521MTC)

Brake Line Junction

from

$87.04
MTC develops and manufactures high quality OE specified polyurethane mounts, bushings and undercar components to the spare parts industry.
See More

FAE – FAE Stop Light Switch (Part No.P305521113FAE)

FAE Stop Light Switch

from

$19.93
The FAE Stop Light Switch is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

TKU – Brake Pad Shim, Teflon (Part No.N102082978)

Brake Pad Shim, Teflon

from

$4.00
Brake Pad Shim, Teflon

Carquest Wearever – Disc Brake Hardware Kit (Part No.13073)

Disc Brake Hardware Kit

from

$17.79
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • New Brake Hardware prevents premature wear and maximizes performance
  • Helps deliver a quieter, more efficient braking system
  • Manufactured with quality materials to suppress high stress levels
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD56)

Brake Pads: Reliable and Dependable Stopping

from

$17.79
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Carquest Wearever – Brake Rotor: Meets or Exceeds OE Specs (Part No.YH141199)

Brake Rotor: Meets or Exceeds OE Specs

from

$73.99
Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time.
See More

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.19-426)

Semi Loaded Disc Brake Caliper

from

$52.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

Akebono Euro – Ceramic Pads Ultra-Premium (Part No.EUR31)

Ceramic  Pads Ultra-Premium

from

$57.99
Product Features:
  • Made in the USA
  • OE Manufacturer
  • Ceramic Brake Pad
  • Low Dust
  • Powerful Quiet Stopping
  • Ultra-Premium
  • Extremely Rotor-Friendly for Longer Rotor Life
See More

PowerStop – Z17 Low-Dust Ceramic Brake Pads with Hardware (Part No.17-031)

Z17 Low-Dust Ceramic Brake Pads with Hardware

from

$39.99
The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium stainless-steel hardware for easy installation
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.H4755)

Disc Brake Hardware Kit

from

$2.99
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • New Brake Hardware prevents premature wear and maximizes performance
  • Helps deliver a quieter, more efficient braking system
  • Manufactured with quality materials to suppress high stress levels
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14009)

Disc Brake Caliper Guide Pin Kit

from

$4.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
  • Helps deliver a quieter, more efficient braking system
See More

Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH141407)

Disc Brake Rotor Meets or Exceeds OE Design

from

$53.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
See More

MTC – Clutch Return Spring (Part No.I400757311MTC)

Clutch Return Spring

from

$2.40
The MTC Clutch Return Spring is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Wearever – Brake Master Cylinder MCA39298: New, Without Reservoir (Part No.MCA39298)

Brake Master Cylinder MCA39298: New, Without Reservoir

from

$70.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:
  • All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
  • Key components like spring are from high and stable quality suppliers.
  • Products are machined by CNC machines with strictly quality control.
  • Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
  • Direct replacement for a proper fit
  • Manufactured to strict engineering quality standards, meets S.A.E. specifications
  • Each product is 100% tested on production lines and sampling tested prior to shipment
  • Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.038 mm
  • Main cylinder hole of measured by the 0.034 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
See More

FTE – Brake Master Cylinder (Part No.N3000328908FTE)

Brake Master Cylinder

from

$119.96
FTE Brake Master Cylinders are manufactured to OE Specifications using both aluminum and iron castings. FTE Brake Master Cylinders are ready to bench bleed and install right out of the box.

Product Features:
  • Meets the brake performance requirements of SAE J1153 and J1154
  • Matching Original Equipment Quality
  • Pressure tested to ensure safe and confident braking
  • Direct Replacement for Original Part
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.11-1921)

Remanufactured Brake Master Cylinder

from

$36.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
  • Plastic reservoirs are 100% vacuum-tested to ensure proper function
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5990)

Vacuum Brake Booster: Without Master Cylinder

from

$104.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5890)

Vacuum Brake Booster: Without Master Cylinder

from

$98.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Professional Parts Sweden – Brake Booster (Part No.N400015972PPS)

Brake Booster

from

$282.83
Brake Booster

Beck/Arnley – Emergency Brake Shoes (Part No.081-0071)

Emergency Brake Shoes

from

$44.99
Helps ensures proper holding capability. Asbestos-free friction material. All new, not remanufactured.
See More

ATE – Brake Caliper Repair Kit (Part No.N1050389941ATE)

Brake Caliper Repair Kit

from

$28.30
ATE Disc Brake Caliper Repair Kit contains the components necessary for piston seal repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

Economy Black – Disc Brake Caliper Repair Kit (Part No.15073)

Disc Brake Caliper Repair Kit

from

$21.49
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span of the brake pads
  • Restores brakes to like-new performance
  • Prevents noise and premature wear
  • Direct replacement for a proper fit
See More

Professional Parts Sweden – Caliper Repair Kit (Part No.N1050183513PPS)

Caliper Repair Kit

from

$33.98
Caliper Repair Kit

1976 Volvo 242 Brake Parts

You count on your 1976 Volvo 242 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 39 Brake Parts ranging in price from $2.30 to $282.83, you’re sure to find everything you need for your 1976 Volvo 242.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 17 different brands like Cardone, Carquest Premium, and Carquest. 1976 Volvo 242 Brake Parts start as low as $2.30!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 70 extensive product reviews on 1976 Volvo 242 Brake Parts. Some of the top-rated Brake Parts products we carry are Clutch Return Spring with 3.8 stars and ThermoQuiet Disc Brake Pad Set with 4.5 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1976 Volvo 242 below to get started!

Top-Rated Brake Parts Brands For Your 1976 Volvo 242

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1976 Volvo 242 running right for years to come. In our inventory you’ll find brands like Cardone, Carquest Premium, Carquest, and even more.

Popular Cardone Brake Parts

You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 1976 Volvo 242 back on the road. Some of the top-rated Cardone products in these categories are:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders

FAQs for 1976 Volvo 242 Brake Parts

What are the most purchased Brake Parts for the 1976 Volvo 242?

Out of 39 Brake Parts for the 1976 Volvo 242, the most popular in our inventory are:
Brake Rotor: Meets or Exceeds OE Specs
from $73.99
This product is not rated
Brake Rotor: Meets or Exceeds OE Specs
Rear Brake Rotors
Disc Brake Hardware Kit
from $17.79
(1)
Disc Brake Hardware Kit
Brake Hardware Kits
Semi Loaded Disc Brake Caliper
from $49.99
This product is not rated
Semi Loaded Disc Brake Caliper
Front Brake Calipers

What are the top-rated 1976 Volvo 242 Brake Parts?

Top-rated Brake Parts for your 1976 Volvo 242 based on customer reviews/ratings are:
Clutch Return Spring
from $2.40
(16)
Clutch Return Spring
“Installed on 2011 nissan keep getting check engine light. Don’t know if defective or something else”
ThermoQuiet Disc Brake Pad Set
from $15.00
(2)
ThermoQuiet Disc Brake Pad Set
“I have only had these on for 2 weeks but so far I see now brake dust on the alloy wheels.”
Remanufactured Brake Master Cylinder
from $36.99
(2)
Remanufactured Brake Master Cylinder
“did what i needed it to do”