1976 Toyota Corolla Steering and Chassis Parts
More 1976 Toyota Corolla Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1976 Toyota Corolla, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1976 Toyota Corolla Steering and Chassis Parts
Rare Parts – Strut Rod Bushing (Part No.RP15983)
from
$85.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Reduces tire wear
- Improves handling while breaking
- Aids in alignment of vehicle
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Rare Parts – Ball Joint (Part No.RP10389)
from
$37.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
MOOG – Ball Joint (Part No.K9742)
from
$70.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Energy Suspension – SwyBarLink (Part No.9.8162R)
from
$25.99
SwyBarLink
MOOG – Stabilizer Bar Link Kit (Part No.K700530)
from
$22.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- The Grade 8 coated bolt makes the link extremely durable
- Features an enhanced solid hex spacer of strong, lightweight, anodized T-6 aluminum to resist corrosion
- Heavy-duty bushings made from new urethane material are extremely durable, absorbing road shocks while resisting oil, heat and ozone
- Bushings feature new patent-pending stress reliefs to improve durability and sensitivity to installation torque
- Black phosphate barrel nut and washers provide corrosion protection.
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Imperial – Quick Connect Coupler (Part No.240250)
from
$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
Cardone – Power Steering Filter (Part No.20-P038F)
from
$26.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-0058F)
from
$42.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Driveworks – Steering Tie Rod End (Part No.DW-EV165)
from
$19.49
When replaced, Driveworks tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts ensure promote improved steering response and durability.
See More
Driveworks – Tie Rod End (Part No.DW-ES80432)
from
$26.99
Tie Rod End
Rare Parts – Idler Arm (Part No.RP20274)
from
$125.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Reduces wander
- Reduces vibration
- Reduces tire wear
Rare Parts – Idler Arm (Part No.RP20282)
from
$80.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Reduces wander
- Reduces vibration
- Reduces tire wear
MOOG – Tie Rod End (Part No.EV189)
from
$52.99
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
Product Features:
See More
Product Features:
- Loose or worn chassis parts can lead to premature tire wear
- Engineered to meet or exceed OE part performance
- Stud design is optimized to provide ideal stud swing and strength for each application.
- Wrench flats on housing and stud provide easy installation and alignment adjustment.
- Assembled in the USA
Sankei 555 – Sankei 555 Tie Rod End (Part No.M3010566350SNK)
from
$44.55
Sankei 555 tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Sankei 555 tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.
Product Features:
See More
Product Features:
- Original Equipment quality
- Coated surface to prevent corrosion and rust
- Fatigue tested for structural integrity
- Precision made components for an ideal fit and function
- Adjustable for proper alignment
- Premium Polychloroprene rubber boots
Rare Parts – Pitman Arm (Part No.RP20423)
from
$72.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Reduces wander
- Reduces vibration
- Restores OE alignment
Rare Parts – Pitman Arm (Part No.RP20528)
from
$81.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Reduces wander
- Reduces vibration
- Restores OE alignment
Rare Parts – Sway Bar Link Kit (Part No.RP22192)
from
$31.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Rare Parts – Sway Bar Link Kit (Part No.RP18473)
from
$36.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Rare Parts – Idler Arm Bushing (Part No.RP22142)
from
$7.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Repairs worn components
- Reduces vibration
- Reduces tire wear
Rare Parts – Tie Rod Sleeve (Part No.RP26209)
from
$96.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
Rare Parts – Tie Rod Sleeve (Part No.RP26206)
from
$34.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
Whiteline – Sway Bar Link Washers (Part No.KW2)
from
$11.99
Has the thin galvanised metal washers on your OEM links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.
Product Features:
See More
Product Features:
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
National – Multi Purpose Seal (Part No.222820)
from
$7.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Camshaft Seal (Part No.S-223010)
Popular 1976 Toyota Corolla Steering and Chassis Parts Categories
1976 Toyota Corolla Steering and Chassis Parts
You count on your 1976 Toyota Corolla to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 32 Steering and Chassis Parts ranging in price from $6.79 to $96.99, you’re sure to find everything you need for your 1976 Toyota Corolla.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 11 different brands like Imperial, Cardone, and DriveWorks. 1976 Toyota Corolla Steering and Chassis Parts start as low as $6.79!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 801 extensive product reviews on 1976 Toyota Corolla Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Stabilizer Bar Link with 4.3 stars and Stabilizer Bar Link Kit with 4.7 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1976 Toyota Corolla below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1976 Toyota Corolla
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1976 Toyota Corolla running right for years to come. In our inventory you’ll find brands like Imperial, Cardone, DriveWorks, and even more.
Popular Energy Suspension Steering and Chassis Parts
You’ll find popular Energy Suspension brand products across Tie Rods. All are waiting to get your 1976 Toyota Corolla back on the road. Some of the top-rated Energy Suspension products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1976 Toyota Corolla, and some of our most reviewed Imperial parts include:
FAQs for 1976 Toyota Corolla Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1976 Toyota Corolla?
Out of 32 Steering and Chassis Parts for the 1976 Toyota Corolla, the most popular in our inventory are:
What are the top-rated 1976 Toyota Corolla Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1976 Toyota Corolla based on customer reviews/ratings are:
from
$22.99
(3)
Stabilizer Bar Link Kit
“The design of this part is excellent. There is still hope left in the world. i will never buy another brand of stabilizer link. the washers inherently”
from
$9.49
(1)
Steering Tie Rod End
“thankful I can still get parts for this old 77 toyota celica. Replaced this part last summer.”
