1976 Porsche 912 Fuel and Emissions Systems
More 1976 Porsche 912 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1976 Porsche 912, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1976 Porsche 912 Fuel and Emissions Systems
Pierburg – Electric Fuel Pump (Part No.E3000422640APG)
from
$256.62
PIERBURG Fuel Pumps excel through their highly developed technology, optimum pumping characteristics when hot, and their low noise level. For over 80 years PIERBURG has been a leading manufacturer of fuel pumps for European vehicles
Product Features:
See More
Product Features:
- Made in Europe – 100% from OE factories and thus OE Standard
- Optimal hot fuel supply properties and low noise level
- Online Service and Product Information
- Provides OE performance and dependability Installation Note: To avoid future warranties clean tank and change fuel filter when installing a new pump
Delphi – Electric Fuel Pump: With Extra Fittings, Insulating Sleeve, Nuts/Washers, Terminal Hardware (Part No.FE0023)
from
$221.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Mr. Gasket – High Performance Electric Fuel Pump – Universal Carbureted Engines (Part No.42S)
from
$56.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- Makes An Excellent Fuel Transfer or Booster Pump
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
Sangsin – OE Replacement Ceramic Brake Pads (Part No.N1010935337SBC)
from
$69.26
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. Sangsin manufactures and designs it’s brake pads to original equipment specifications for quality long lasting performance and is the OE supplier for major Korea automakers including Hyundai and Kia Motors. Sangsin is the largest friction manufacturer in Korea and has been devoted to manufacturing, researching and developing brake pads, linings and other vehicle friction material for over 40 years. Sangsin has eliminated friction materials that create black dust and noise and ensures quiet braking and clean wheels.
Product Features:
See More
Product Features:
- OE Ceramic formulation: Excellent fade resistance, Extremely low dust characteristics
- Incorporates precision fit shims, OE positive mold design technology
- OEM technology: Chamfered and Slotted to reduce noise when braking
- Scorched as same as OE process in order to minimize the need for initial break-in and increase initial stopping power
- 2-stage press process Fine blanked backing plate: insure precise fit and function
- Underlayer between friction and backing plate to promote better friction to plate adhesion an minimize noise
- OE level shim with premium Rubber-Steel-Rubber shim
Original Equipment – Fuel Tank Body Seal (Part No.E2003947548OEA)
from
$28.91
Fuel Tank Body Seal
Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
CRP – Fuel Injector Seal (Part No.C101019205CRP)
from
$2.47
Fuel Injector Seal
Bosch – Fuel Injector 62707: New (Part No.62703)
from
$164.99
Bosch Port Fuel Injectors (PFI) have a robust design and are capable of using Ethanol fuel (E100). All Bosch fuel injectors released to the aftermarket are OE fit, form and function, and are produced to OE specifications. The Bosch fuel injector has a return rate of 1 part per million (PPM), making Bosch the industry benchmark. Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, And Asian vehicles.
Product Features:
See More
Product Features:
- Guaranteed OE fit, form and function
- Manufactured of the highest quality materials
- Provides precision flow and original spray pattern for optimal performance
- Product includes top and bottom mounting o-ring
- Maintains new-car smoothness and drivability
Carquest Premium – Remanufactured Fuel Injector (Part No.A213-1075)
from
$38.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Carquest – Fuel Injector (Part No.57519)
from
$59.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
- High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
- Fiber-optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Popular 1976 Porsche 912 Fuel and Emissions Systems Categories
1976 Porsche 912 Fuel and Emissions Systems
You count on your 1976 Porsche 912 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 11 Fuel and Emissions Systems ranging in price from $2.47 to $256.62, you’re sure to find everything you need for your 1976 Porsche 912.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 9 different brands like Delphi, Carquest, and Carquest Premium. 1976 Porsche 912 Fuel and Emissions Systems start as low as $2.47!
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1976 Porsche 912 below to get started!
FAQs for 1976 Porsche 912 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1976 Porsche 912?
Out of 11 Fuel and Emissions Systems for the 1976 Porsche 912, the most popular in our inventory are:
