1976 Porsche 912 Brake Parts
More 1976 Porsche 912 Brake Parts Categories
If you’re looking for an original Brake Parts replacement for a 1976 Porsche 912, you can search through our selection below. You’ll also find aftermarket and OEM Brake Parts to meet your needs.
Essential 1976 Porsche 912 Brake Parts
Carquest Premium Gold – Brake Pads Without Hardware, Ceramic, Long Pad Life, Quiet Braking (Part No.GNAD31)
from
$43.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.
Product Features:
See More
Product Features:
- Application-specific friction formulations provide shorter stopping distances and extended pad life
- Hardware included for most applications, provides better value and
- OE-designed slots and chamfers to reduce noise and vibration
- Multi-layer shim provides near silent braking
- Powder-coated backing plate prevents corrosion
Zimmermann – Coat-Z Sport Brake Disc (Rotor) (Part No.N1000670578ZXC)
from
$124.90
The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- Better wet braking performance by permanent expulsion of brake dust and water
- Sporty look
- Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
- Noticeable improvement in the braking power of your car
- Prevention of brake fade
- Countersinking of holes doubles up as wear indicator
- 1:1 exchange of original disc possible
- No additional adaption necessary
- Not subject to registration: general ABE certification supplied with disc
Elring – Distributor O-Ring (Part No.F210154475ELR)
from
$1.18
The Elring Distributor O-Ring is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
ATE – Brake Caliper Repair Kit (Part No.N105022429ATE)
from
$26.23
ATE Disc Brake Caliper Repair Kit contains the components necessary for piston seal repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.
Product Features:
See More
Product Features:
- Guaranteed factory fit to original equipment specifications
- Meets or exceeds original equipment factory safety standards
FTE – Brake Caliper Repair Kit (Part No.N105022650FTE)
from
$18.09
FTE Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.
Product Features:
See More
Product Features:
- Guaranteed factory fit to original equipment specifications
- Meets or exceeds original equipment factory safety standards
ATE – ATE Brake Master Cylinder (Part No.N300022652ATE)
from
$489.65
As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.
Product Features:
See More
Product Features:
- Short closing paths
- Low volume uptake
- High efficiency
- Low throttling / after-suction resistance
- Low pressure differential between primary and secondary circuits
- Good bleedability
- Cr6-free surfaces for vehicles built from July 2007 (as required by law)
- Central valve version suitable for ABS
- Compact design – ideal for installation in small spaces
- Reduced weight – by roughly 20% compared to conventional central valve technology
- Fewer components – almost half as many as compared to conventional technologies
- Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
- Low volume uptake – minimized elastic deformations due to smaller seals
- Sealing cups supported in the housing – robustness against soiling and wear; longer life
- Cr6-free surfaces for vehicles built from July 2007 (as required by law)
Original Equipment – Parking Brake Shoe (Part No.N500028310OEA)
from
$32.10
Parking Brake Shoe
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Popular 1976 Porsche 912 Brake Parts Categories
1976 Porsche 912 Brake Parts
You count on your 1976 Porsche 912 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 7 Brake Parts ranging in price from $1.18 to $489.65, you’re sure to find everything you need for your 1976 Porsche 912.
Brands matter. If you want to shop a specific Brake Parts brand, we stock 7 different brands like Cardone, Carquest Premium, and Zimmerman. 1976 Porsche 912 Brake Parts start as low as $1.18!
One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 30 extensive product reviews on 1976 Porsche 912 Brake Parts.
Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1976 Porsche 912 below to get started!
Top-Rated Brake Parts Brands For Your 1976 Porsche 912
Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1976 Porsche 912 running right for years to come. In our inventory you’ll find brands like Cardone, Carquest Premium, Zimmerman, and even more.
Popular Cardone Brake Parts
You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 1976 Porsche 912 back on the road. Some of the top-rated Cardone products in these categories are:
Top-Rated Brake Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Brake Parts for your 1976 Porsche 912, and some of our most reviewed parts include:
from
$43.99
(20)
Brake Pads Without Hardware, Ceramic, Long Pad Life, Quiet Braking
Rear Brake Pads and Shoes
FAQs for 1976 Porsche 912 Brake Parts
What are the most purchased Brake Parts for the 1976 Porsche 912?
Out of 7 Brake Parts for the 1976 Porsche 912, the most popular in our inventory are:
