1976 Pontiac Sunbird Wheels and Tires
More 1976 Pontiac Sunbird Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 1976 Pontiac Sunbird, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 1976 Pontiac Sunbird Wheels and Tires
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece (Part No.33500-12)
from
$361.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)
from
$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com
Product Features:
See More
Product Features:
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Sensor must be programmed to specifi Y/M/M vehicle
- Compatible with most programming tools
- Make sure that your TPMS programming tool is updated to it’s latest version
- Combines 314.9, 315 & 433 MHz application into one sensor
- Future proofed to support new and pending OE system technologies
- Optimizes inventory levels and returns
- Reduces overal cost and increases speed of service
- Use service kit 20018 to replace the rubber valve assembly
- Valve Core Torque = 3.5 in-lbs (0.4 Nm)
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Driveworks – Wheel Hub Assembly (Part No.NT512001)
from
$97.99
DRIVEWORKS Wheel Hub assemblies are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hub assemblies are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of DRIVEWORKS Wheel Hub assemblies. DRIVEWORKS Wheel Hub assemblies come complete with wheel studs, hub and bearings where applicable. ABS Wheel Sensors are also provided where applicable.
Product Features:
See More
Product Features:
- Constructed from quality materials for extended durability
- Integral raceway provides proper clearance between the ball and bearing riding surfaces
- Precision-matched components deliver smooth and quiet operation
- Manufactured to strict engineering quality standards
- Quality ABS leads are 100% tested to ensure longevity and performance (where applicable)
- Go through a vacuum vulcanization process to enhance the structural integrity of the seal and rubber components (where applicable)
- Brand may vary by location
Driveworks – Hub & Bearing Assembly (Part No.NT513012)
from
$46.99
Driveworks hub bearing assembly is designed to meet or exceed original equipment (OE) standards in form, fit and function. The hub bearing assembly is designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of Drivework’s hub bearing assembly. The hub bearing comes complete with wheel studs, hub and bearings. Also, includes ABS Wheel Sensors where applicable.
Product Features:
See More
Product Features:
- Constructed from high-quality materials for extended durability
- Integral raceway provides proper clearance between the ball and bearing riding surfaces
- Ensures proper function and quiet operation
- Precision-matched components deliver smooth and quiet operation
- Manufactured to strict engineering quality standards
- Brand may vary by location
MOOG Hub Assemblies – Wheel Bearing and Hub Assembly: Rear, 5 Studs (Part No.513012)
from
$113.99
Product Features:
See More
- Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
- Engineered to overcome problems and deliver smooth, reliable performance.
- MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.
- Application specific design
Dorman – Wheel Lug Nut: 7/16-20 Thread, Flanged, Mag, 1.469" Length, Chrome, 1 Pack (Part No.611-101.1)
from
$3.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut: 7/16-20 Thread, Flanged, Mag, 1.684" Length, Chrome, 4 Pack (Part No.711-108)
from
$8.29
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Nut M12-1.50 Mag – 13/16 In. Hex, 1.672 In. Length (Part No.611-108)
from
$2.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Schrader – Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc (Part No.33700)
from
$51.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.33500)
from
$41.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Dorman – 7/16-20 Serrated Wheel Stud – .472 In. Knurl, 1-1/2 In. Length (Part No.610-186)
from
$2.49
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – Wheel Stud: Serrated, M12-1.50 Thread Size, Right Hand Thread, 40 Pack (Part No.610-254.40)
from
$72.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – 7/16-20 Serrated Wheel Stud – .564 In. Knurl, 1-5/16 In. Length (Part No.610-025)
from
$3.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – M12-1.50 Serrated Wheel Stud – 12.73mm Knurl, 41.5mm Length (Part No.610-254)
from
$3.79
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
National – Multi Purpose Seal (Part No.8705S)
from
$5.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Oil Seal (Part No.S-8705S)
from
$2.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Dorman – Wheel Nut M12-1.50 External Thread – 19mm Hex, 27.5mm Length (Part No.611-109)
from
$2.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Nut 7/16-20 Standard – 3/4 In. Hex, 9/16 In. Length (Part No.611-014)
from
$1.79
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Nut M12-1.50 Standard – 19mm Hex, 14mm Length (Part No.611-062)
from
$1.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Acorn, 1.378" Length, Chrome (Sold by each) (Part No.611-100)
from
$2.79
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
McGard – Chrome Cone Seat SplineDrive Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.65357)
from
$29.99
Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Requires 65100 Or 65300 Installation Tool sold separately
Dorman – M12-1.50 Wheel Cover Retaining Nut – 19mm Hex, 22mm Length (Part No.611-085)
from
$2.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Driveworks – Taper Bearing Cup (Part No.S-M-86610)
from
$4.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Popular 1976 Pontiac Sunbird Wheels and Tires Categories
1976 Pontiac Sunbird Wheels and Tires
You count on your 1976 Pontiac Sunbird to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 32 Wheels and Tires ranging in price from $1.79 to $361.99, you’re sure to find everything you need for your 1976 Pontiac Sunbird.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 4 different brands like Dorman, Schrader, and National. 1976 Pontiac Sunbird Wheels and Tires start as low as $1.79!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 306 extensive product reviews on 1976 Pontiac Sunbird Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Multi Purpose Bearing with 4.1 stars and Multi Purpose Seal with 5.0 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 1976 Pontiac Sunbird below to get started!
Top-Rated Wheels and Tires Brands For Your 1976 Pontiac Sunbird
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1976 Pontiac Sunbird running right for years to come. In our inventory you’ll find brands like Dorman, Schrader, National, and even more.
Popular Dorman Wheels and Tires
You’ll find popular Dorman brand products across Wheel Hardware. All are waiting to get your 1976 Pontiac Sunbird back on the road. Some of the top-rated Dorman products in these categories are:
from
$3.99
(1)
Wheel Lug Nut: 7/16-20 Thread, Flanged, Mag, 1.681" Length, Chrome, 1 Pack
Custom Wheel Lug nuts
from
$2.29
(1)
Wheel Lug Nut: 7/16-20 Thread, Conical 60, Standard, 0.563" Length, Zinc, 1 Pack
Wheel Lug Nuts
from
$3.79
(1)
Wheel Lug Nut: 7/16-20 Thread, Conical 60, Acorn, 1.377" Length, Chrome, 1 Pack
Wheel Lug Nuts
Top-Rated Wheels and Tires
If are what you’re looking for, our inventory holds plenty. We stock brand Wheels and Tires for your 1976 Pontiac Sunbird, and some of our most reviewed parts include:
from
$41.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Remote Tire Pressure Sensors
FAQs for 1976 Pontiac Sunbird Wheels and Tires
What are the most purchased Wheels and Tires for the 1976 Pontiac Sunbird?
Out of 32 Wheels and Tires for the 1976 Pontiac Sunbird, the most popular in our inventory are:
from
$1.79
This product is not rated
Wheel Nut 7/16-20 Standard – 3/4 In. Hex, 9/16 In. Length
Wheel Lug Nuts
from
$2.49
This product is not rated
7/16-20 Serrated Wheel Stud – .472 In. Knurl, 1-1/2 In. Length
Wheel Studs
from
$51.99
This product is not rated
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
Remote Tire Pressure Sensors
What are the top-rated 1976 Pontiac Sunbird Wheels and Tires?
Top-rated Wheels and Tires for your 1976 Pontiac Sunbird based on customer reviews/ratings are:
from
$33.49
(3)
Wheel Lug Nut & Lock Set: 7/16-20 Thread, Conical 60, Acorn, 1.432" L, Chrome, 16 Nuts/4 Locks/1 Key
“Nice set, everything in one package!!!”
