1976 Jaguar XJ12 Exhaust Parts

Essential 1976 Jaguar XJ12 Exhaust Parts

Eurospares – Exhaust Stud (Part No.H100538741ESP)

Exhaust Stud

from

$3.84
Exhaust Stud

Payen – Exhaust Manifold Gasket (Part No.A811156772PAY)

Exhaust Manifold Gasket

from

$5.15
Exhaust Manifold Gasket

MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.441304)

California Grade CARB Compliant Universal Catalytic Converter

from

$503.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 441304 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.81804)

CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed

from

$488.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:
  • CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
  • SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
See More

MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.444004)

California Grade CARB Compliant Universal Catalytic Converter

from

$327.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 444004 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15036)

Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed

from

$102.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.

Product Features:
  • EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
  • NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
  • BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
See More

MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.444104)

California Grade CARB Compliant Universal Catalytic Converter

from

$327.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 444104 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.53004)

Standard Grade Federal / EPA Compliant Universal Catalytic Converter

from

$97.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53004 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.91004)

Standard Grade Federal / EPA Compliant Universal Catalytic Converter

from

$100.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 91004 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.337305)

California Grade CARB Compliant Universal Catalytic Converter

from

$328.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 337305. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)

Terminator; Exhaust Tips

from

$85.99


Product Features:
  • Show Quality Chrome Platinum
  • Durable Black Finish
  • Can Be Welded Or Clamped
  • Complete The System
  • Glass-Packed Resonators
See More

Eurospare – Exh. Man. to Pipe Ga (Part No.H4003325131ESP)

Exh. Man. to Pipe Ga

from

$5.37
Exh. Man. to Pipe Ga

1976 Jaguar XJ12 Exhaust Parts

You count on your 1976 Jaguar XJ12 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 9 Exhaust Parts ranging in price from $3.84 to $328.99, you’re sure to find everything you need for your 1976 Jaguar XJ12.

Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 6 different brands like Magnaflow, Flowtech, and Walker. 1976 Jaguar XJ12 Exhaust Parts start as low as $3.84!

One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 18 extensive product reviews on 1976 Jaguar XJ12 Exhaust Parts.

Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1976 Jaguar XJ12 below to get started!

Top-Rated Exhaust Parts Brands For Your 1976 Jaguar XJ12

Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1976 Jaguar XJ12 running right for years to come. In our inventory you’ll find brands like Magnaflow, Flowtech, Walker, and even more.

Popular MagnaFlow Exhaust Parts

You’ll find popular MagnaFlow brand products across Catalytic Converters. All are waiting to get your 1976 Jaguar XJ12 back on the road. Some of the top-rated MagnaFlow products in these categories are:

Top-Rated Exhaust Parts


If are what you’re looking for, our inventory holds plenty. We stock brand Exhaust Parts for your 1976 Jaguar XJ12, and some of our most reviewed parts include:
Terminator; Exhaust Tips
from $85.99
(5)
Terminator; Exhaust Tips
Exhaust Chrome and Stainless Tips

FAQs for 1976 Jaguar XJ12 Exhaust Parts

What are the most purchased Exhaust Parts for the 1976 Jaguar XJ12?

Out of 9 Exhaust Parts for the 1976 Jaguar XJ12, the most popular in our inventory are:
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
from $102.99
This product is not rated
Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed
Catalytic Converters
Exh. Man. to Pipe Ga
from $5.37
This product is not rated
Exh. Man. to Pipe Ga
Exhaust Pipe and Flange Gaskets
Catalytic Converter - Universal - 222 Series - 2.00 in. Inlet/Outlet - 49 State
from $131.99
This product is not rated
Catalytic Converter – Universal – 222 Series – 2.00 in. Inlet/Outlet – 49 State
Catalytic Converters