1976 GMC G35 Fuel and Emissions Systems
More 1976 GMC G35 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1976 GMC G35, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1976 GMC G35 Fuel and Emissions Systems
Felpro – EGR/EXHAUST AIR SUPPLY GASKET (Part No.70950)
from
$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Carquest Premium – Fuel Tank Selector Valve Connector (Part No.FSA1013)
from
$21.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Fuel Tank Selector Valve (Part No.FSC1007)
from
$76.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Fuel Cap: 10742, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10742)
from
$9.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
ARP Auto Racing – Chrome Moly (Part No.134-8701)
from
$22.79
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you
Product Features:
See More
Product Features:
- Made From Premium Grade Aerospace Chrome Moly
- Center Less Ground To Precise Diameter
- Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
- Provide With Required Reliability And Improved Performance
KAI – Fuel Tank Lock Ring (Part No.SPILO01)
from
$9.99
New Standard Replacement Fuel Tank Lock Ring, Includes O-Ring
Product Features:
See More
Product Features:
- Includes O-Ring
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Secondary Air Injection Pipe (Part No.EGN2679)
from
$67.99
Secondary Air Injection Pipe
Carquest Premium – Ported Vacuum Switch (Part No.ECA1225)
from
$45.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ported Vacuum Switch (Part No.ECA1242)
from
$45.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Mechanical Fuel Pump 1496422: Includes Gasket (Part No.1496422)
from
$27.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Holley – Mechanical Fuel Pump (Part No.12-454-20)
from
$212.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 170 gph Free Flow
- Shutoff Pressure Pre-Set At 8 PSI
- Fuel Pressure Regulator Required
- Heavy Duty Construction For Continuous High rpm Operation
- Redesigned High Flow Valves Ensure Adequate Fuel Delivery
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- 3/4in.-16 Inlet And Outlet Ports
- Fittings Not Included
Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)
from
$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X
Product Features:
See More
Product Features:
- Black AnodizedFinish
- High Capacity Fuel Rails
- For Use W/ Pro-Flo XT Manifold #7137
- -6 AN Inlet / Outlet
- Made In The USA
Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1001)
from
$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Help – Vacuum Storage Canister (Part No.47076)
from
$24.99
This vacuum reservoir is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this vacuum reservoir is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this reservoir is a reliable replacement for an original part that is missing or damaged
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
Mr. Gasket – Fuel Pump Mounting Plate (Part No.1514)
from
$16.99
Ideal for mounting a stock original equipment pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- Comes With Gasket
ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)
from
$12.29
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Properly Aligned
- Conventional Hex Heads
- Rust-Proof Stainless Bolts
- 170,000 PSI
Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1516)
from
$12.99
Precision cut to cover stock fuel pump opening when converting to an electric fuel pump. Gasket included.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- Comes With Gasket
- Easy Installation
Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1515)
from
$12.99
This is what you need when changing your manual fuel pump to electric. It blocks the hole that remains when you remove the mechanical fuel pump from the engine to keep the oil inside. This plate is precision machined and is chrome plated.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- Comes With Gasket
Spectre – Sbc Blk Off Plate W/Bolts (Part No.42463)
from
$12.99
Spectre’s triple chrome plated Fuel Pump Block Off Plate was designed for small block Chevrolet engines. Engineered for optimum fit and function, this kit includes a block off plate gasket and chrome mounting bolts with washers.
Product Features:
See More
Product Features:
- Necessary if switching to electric fuel pump
- Includes block off plate gasket
- Includes chrome mounting bolts with washers
- Triple chrome plated
Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-814)
from
$24.49
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.
Product Features:
See More
Product Features:
- Cover Hole In Block When Mech. Fuel Pump Is Removed
Popular 1976 GMC G35 Fuel and Emissions Systems Categories
1976 GMC G35 Fuel and Emissions Systems
You count on your 1976 GMC G35 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 40 Fuel and Emissions Systems ranging in price from $2.99 to $212.99, you’re sure to find everything you need for your 1976 GMC G35.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 13 different brands like Felpro, Carquest Premium, and Delphi. 1976 GMC G35 Fuel and Emissions Systems start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 1,083 extensive product reviews on 1976 GMC G35 Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are High-Flow Mechanical Fuel Pump for Street Performance with 4.0 stars and Locking Fuel Cap: 10571, Push In, Direct Fit, Provides Tight Seal, 1 Pack with 4.5 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1976 GMC G35 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1976 GMC G35
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1976 GMC G35 running right for years to come. In our inventory you’ll find brands like Felpro, Carquest Premium, Delphi, and even more.
Popular Dorman – Help Fuel and Emissions Systems
You’ll find popular Dorman – Help brand products across Vacuum Pumps. All are waiting to get your 1976 GMC G35 back on the road. Some of the top-rated Dorman – Help products in these categories are:
Top-Rated Mr. Gasket Fuel and Emissions Systems
If Mr. Gasket are what you’re looking for, our inventory holds plenty. We stock Mr. Gasket brand Fuel and Emissions Systems for your 1976 GMC G35, and some of our most reviewed Mr. Gasket parts include:
FAQs for 1976 GMC G35 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1976 GMC G35?
Out of 40 Fuel and Emissions Systems for the 1976 GMC G35, the most popular in our inventory are:
What are the top-rated 1976 GMC G35 Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1976 GMC G35 based on customer reviews/ratings are:
from
$124.99
(10)
High-Flow Mechanical Fuel Pump for Street Performance
“This pump fit my 55 Chevy with plenty of clearance. I’ve run it about 150 miles and had no issues.”
from
$22.99
(4)
Locking Fuel Cap: 10571, Push In, Direct Fit, Provides Tight Seal, 1 Pack
“Exact fit replacement, no problems what so ever.”
