1976 Chevrolet Monte Carlo Drivetrains
More 1976 Chevrolet Monte Carlo Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1976 Chevrolet Monte Carlo, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1976 Chevrolet Monte Carlo Drivetrains
Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)
from
$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.
Product Features:
See More
Product Features:
- Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
Yukon Gear – C/Clip For GM 7.5", 7.6" & 8" (Part No.33082)
National – Shaft Repair Sleeve (Part No.99187)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Pinion Install Kit For GM 8.2" Differential (Part No.13066)
from
$259.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits GM 8.2″
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
Mr. Gasket – Differential Gasket (Part No.84A)
from
$15.99
Precision cut and high quality materials. Reusable.
Product Features:
See More
Product Features:
- Precision cut
- High-quality materials
- Reusable
Pro-King – Differential Cross Shaft (Part No.742G673)
from
$28.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
Yukon Gear – Aluminum Girdle Cover For GM 12 Bolt Car Ta HD (Part No.32116)
from
$396.99
Aluminum Girdle cover for GM 12P TA HD.
Product Features:
See More
Product Features:
- Fits GM 12 bolt passenger car
- Aluminum girdle cover
Yukon Gear – GM 12 Bolt Passenger Car Crush Sleeve (Part No.33104)
from
$16.99
GM 12 bolt passenger car crush sleeve. Approx 2.340″ long.
Product Features:
See More
Product Features:
- Crush sleeve for GM 12 bolt passenger car
- 2.340″ tall
Spicer – SPICER U-JOINT (Part No.5-1310-1X)
from
$44.99
SPICER U-JOINT
Yukon Gear – Axle Seal, For 1559 Or 6408 Bearing (Part No.30201)
from
$7.99
Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- 2.530″ O.D.
Driveworks – Axle Repair Bearing (Part No.S-RP-5707)
from
$16.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Forged Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41093)
from
$354.99
Yukon forged yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Forged steel
Yukon Gear – Yoke For GM 8.5" With A 1310 U/Joint Size (Part No.41086)
from
$449.99
Yukon yoke for GM 8.5″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1310 u-joint size
- Outside snap ring design
- 3.219″ snap ring span
- 1.062″ cap diameter
- Strap style
Motive Gear – Differential Gear Install Kit (Part No.GM7.5IK)
Yukon Gear – Standard Open Cross Pin Shaft For GM 8.2" And 55P (Part No.33407)
from
$88.99
Standard Open cross pin shaft for GM 8.2″ and 55P.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 8.2″ and 1955-1964 passenger car
USA Standard Gear – Ring & Pinion Gear Set For GM 7.5" In A 2.73 Ratio (Part No.36192)
from
$375.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.
Product Features:
See More
Product Features:
- Fits GM 7.5″ and 7.6″
- 7.50″ ring gear diameter
- 27 spline pinion
- 10 ring gear bolts
- 2.73 ratio
Yukon Gear – GM 7.5" Standard Open Side Gear Thrust Washer (Part No.33389)
from
$11.99
GM 7.5″ standard Open side gear thrust washer.
Product Features:
See More
Product Features:
- Side gear thrust washer
- Fits GM 7.5″
Pro-King – Differential Ring Gear Bolt (Part No.742G935)
from
$1.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Brute Force – Universal Joint (Part No.2-0053BF)
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Yukon Gear – Dura Grip Case, GM 12 Bolt Car, 4 Series (Part No.20105)
from
$386.99
GM 12P DURA GRIP case, bare, 4.10 & up, 30spline & 33spline.
Product Features:
See More
Product Features:
- Fits GM 12 bolt passenger car with 33 spline axles
- Does not include spider gears
Yukon Gear – U/Joint Strap Bolt For 14T, 7.5", And 8.5" GM (Part No.33351)
from
$8.49
U/joint strap bolt for 14T, 7.5″, and 8.5″ GM.
Product Features:
See More
Product Features:
- u-joint strap bolt for GM 10.5″ 14 bolt truck, 7.5″ and 8.5″
Yukon Gear – Positraction Cross Pin Bolt For GM 12 Bolt Car And Truck (Part No.33344)
from
$37.99
Positraction cross pin bolt for GM 12P and 12T.
Product Features:
See More
Product Features:
- Cross pin bolt for GM 12 bolt passenger car and truck
- For OEM positraction applications only
National – Bearings (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Taper Bearing Cup (Part No.S-LM-501314)
from
$7.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Dorman – Spindle Nut M27-2.0 (Part No.05107)
from
$10.49
Our Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- High quality steel construction
- Conveniently available in many styles and in packs of different quantities
- Dorman’s Spindle Nuts are constructed to strict engineering quality standards
Popular 1976 Chevrolet Monte Carlo Drivetrains Categories
1976 Chevrolet Monte Carlo Drivetrains
You count on your 1976 Chevrolet Monte Carlo to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 218 Drivetrains ranging in price from $1.99 to $919.99, you’re sure to find everything you need for your 1976 Chevrolet Monte Carlo.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Moog, Felpro, and National. 1976 Chevrolet Monte Carlo Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,328 extensive product reviews on 1976 Chevrolet Monte Carlo Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.2 stars and Bearings with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1976 Chevrolet Monte Carlo below to get started!
Top-Rated Drivetrains Brands For Your 1976 Chevrolet Monte Carlo
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1976 Chevrolet Monte Carlo running right for years to come. In our inventory you’ll find brands like Moog, Felpro, National, and even more.
Popular Mr. Gasket Drivetrains
You’ll find popular Mr. Gasket brand products across Differentials. All are waiting to get your 1976 Chevrolet Monte Carlo back on the road. Some of the top-rated Mr. Gasket products in these categories are:
Top-Rated Felpro Drivetrains
If Felpro are what you’re looking for, our inventory holds plenty. We stock Felpro brand Drivetrains for your 1976 Chevrolet Monte Carlo, and some of our most reviewed Felpro parts include:
FAQs for 1976 Chevrolet Monte Carlo Drivetrains
What are the most purchased Drivetrains for the 1976 Chevrolet Monte Carlo?
Out of 218 Drivetrains for the 1976 Chevrolet Monte Carlo, the most popular in our inventory are:
What are the top-rated 1976 Chevrolet Monte Carlo Drivetrains?
Top-rated Drivetrains for your 1976 Chevrolet Monte Carlo based on customer reviews/ratings are:
