1976 Chevrolet Corvette Ignition and Tune-Up Products

NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:

• PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
• BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
• STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
• CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Edelbrock part #41123 aluminum coil covers are designed for 2005-13 Corvette with an Edelbrock supercharger. Our kit is geared towards those with competition versions of the supercharger kits, which do not include coil covers, but would like to add them.

Product Features:

• Will Not Fit Naturally Aspirated Motors
• Black Textured Powder Coated Finish
• For E-Force Supercharger System For 2005 & Later Base Model Corvette
• Cast Aluminum Material
• Made In The USA

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:

• Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
• Multi-rib insulator reduces danger of “flash-over”
• One-piece terminal post adds strength
• Resistor reduces radio frequency interference (RFI) and electrode erosion

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

• Custom Fit For Make And Model Listed
• Wires Are Pre-Cut To Exact Specifications
• Bolt-on Performance
• Conductor core features DuPont Kevlar material for increased tensile strength
• Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
• Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:

• PerTronix D100800 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Non Vacuum Advance Black Cap
• Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.

An ACDelco Professional, premium aftermarket Ignition Control Module is a high quality replacement for many vehicles on the road today. It increases voltage in order for the spark plugs to ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Control Module features electronically welded lead connections to help reduce heat stress, failure, or cold joints. This ignition control module has been laser trimmed to provide precise values and reduce deterioration and damage. It includes a copper slug heat sink to help dissipate heat and create a more stable environment and also features a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. This premium aftermarket replacement ignition control module is manufactured to meet your expectations for fit, form, and function.

Product Features:

• Feature electronically welded lead connections to reduce heat stress failure or cold joints
• Laser trimmed to provide precise values and reduce deterioration and damage
• Increase voltage in order for the spark plugs to ignite the air/fuel mixture
• Include a copper slug heat sink to help dissipate heat and create a more stable environment
• Equipped with a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs
• Professional, premium aftermarket replacement
• Manufactured to meet expectations for fit, form, and function to provide the performance and dependability you expect from ACDelco

Replacement crank trigger wheel for big block Chevy 8 In. balancer. For a long time racers have known that one of the best things to do to an engine to improve its performance is to stabilize ignition timing. The MSD flying magnetic crank trigger system does exactly that by using four magnets embedded in an aluminum wheel. This is the replacement part for the aluminum crank trigger wheel.

Product Features:

• Accurate Trigger Signals
• Non-Magnetic Pickup Cannot Be False Triggered
• Parts CNC Machined Aluminum In Red Anodized Finish
• Wide Range Of Timing Adjustment

GM Genuine Parts Ignition Starter are designed, engineered, and tested to rigorous standards, and are backed by General Motors. It is a multi-position switch that activates the ignition, accessory, and cranking circuits in your vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Work with vehicle electronics to help optimize vehicle capabilities
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

• Increased outer hardened layer thickness (RC 55-60)
• Micro Polished Surface For Smooth Contact
• Proprietary formulated ductile iron.
• Melonite QPQ coated reduces friction and initial wear
• Interstitial carbide improves wear resistance/running properties

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Built by IATF 16949 certified manufacturers for consistent durability
• Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
• Segmented secondary bobbins to distribute high voltage and prevent shorting
• Extensive design validation testing to ensure long-lasting reliability
• 100% end-of-line tested to ensure proper performance
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Spark Plug Wire Set

Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

• Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
• Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
• Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
• Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
• Advanced anti-wear technology provides maximum protection to gears and bearings

Product Features:

• Integrated A/D converter and digital signal processing with a dynamically adaptive switch point improves accuracy and operation
• Advanced circuitry protects the system from stray electro-magnetic fields and power spikes
• Custom magnetic circuit programming calibrates the sensor while performance testing for improved timing accuracy between the target wheel and sensor output

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:

• 6.25 in. Diameter
• Absolutely the most accurate way to trigger the ignition.
• The non-magnetic pickup cannot be false triggered.
• Powerful magnets are embedded in a billet aluminum trigger wheel.

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: springless; single-lip
• Temperature range: -100°F to 450°F; -73°C to 232°C
• Resistant to hydrocarbon/oxygenate blends and provides superior performance
• Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
• Delivers quality and reliable performance for every type of repair

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• High temperature enameled wires were specified for better insulation and performance
• With industry leading expertise in electronic ignition, when original equipment fails our products are designed to fix the inherent failure issues
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi

Product Features:

• PerTronix D4052 Flame-Thrower HEI Distributor Cap Blue
• Made from hi-performance 60 KV rated alkyd molding compound.

Finally a high quality cap and rotor for the front mount LT1 distributor! LT1 fans have been searching for a cap that could deliver the performance of the LT1 and MSD is happy to bring it to them. Remember, changing the cap and rotor on this engine is no.

Product Features:

• Fits MSD LT1 Distributor PN[8381]
• Injection molded housing from DuPont material
• Extreme strength; high dielectric properties
• Terminal paths encased in epoxy compound
• Brass/stainless steel rotor tip design
• Includes fresh air vacuum kit

NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:

• PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
• BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
• STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
• CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “choke”. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.

Product Features:

• Custom fit for make and model listed.
• Bolt-on performance
• Wires are precut to exact specifications
• Conductor core features DuPont Kevlar material for increased tensile strength
• Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
• Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately