1976 Chevrolet C20 Exhaust Mufflers
More 1976 Chevrolet C20 Exhaust Mufflers
Find your specific 1976 Chevrolet C20 original or aftermarket Exhaust Mufflers below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1976 Chevrolet C20 Exhaust Mufflers
Walker – SoundFX Muffler, Universal/ Fabrication Needed (Part No.18124)
from
$77.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42543)
from
$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.8042543)
from
$122.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842548)
from
$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.21910)
from
$105.99
The only broad-market muffler with 100% stainless-steel construction, Walker® Quiet-Flow® SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.22329)
from
$121.99
The only broad-market muffler with 100% stainless-steel construction, Walker® Quiet-Flow® SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18191)
from
$99.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Walker – Sound Solution Muffler (Part No.18620)
from
$62.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More
Flowmaster Inc. – Delta 40 Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.842543)
from
$153.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Walker – Sound Solution Muffler (Part No.18624)
from
$62.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18293)
from
$77.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Flowmaster Inc. – 50 Series Muffler, 2.5in Center Inlet 2in Dual Offset Outlet, Non-Reversible, Moderate Sound (Part No.9425502)
from
$139.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18274)
from
$85.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Flowmaster Inc. – 70 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, 22in long, Non-Reversible, Mild Sound (Part No.52573)
from
$220.99
The 70 series utilizes Flowmaster’s patented Delta Flow technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV’s, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.21784)
from
$81.99
Designed to deliver superior flow and OE-style sound, Walker® Quiet-Flow® mufflers are available for top-selling domestic and foreign vehicles.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- RESISTS CORROSION — Internal drainage system helps reduce moisture collection
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Walker – Sound Solution Muffler (Part No.18746)
from
$62.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More
Flowmaster Inc. – Super 40 Series Muffler, 3in Center Inlet 2.5in Dual Offset Outlet, Non-Reversible, Aggressive Sound (Part No.8530452)
from
$159.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
Product Features:
See More
Product Features:
- Durable fully welded 409 stainless steel
- Deep aggressive exhaust note
- Noticeable interior resonance
- Excellent performance on high horsepower vehicles
Popular 1976 Chevrolet C20 Exhaust Mufflers Categories
1976 Chevrolet C20 Exhaust Mufflers
Maybe you’re in the middle of a full rebuild of that 1976 Chevrolet C20. Maybe you just need a couple of Exhaust Mufflers. Either way, Advance Auto Parts has 13 different Exhaust Mufflers in our inventory ranging from $62.99 to $220.99. That means you can find the exact parts or products you need to keep that 1976 Chevrolet C20 running smoothly.
Exhaust Mufflers are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1976 Chevrolet C20. Flowmaster Inc. and Walker are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Exhaust Mufflers for your 1976 Chevrolet C20, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 58 reviews in this category, some of the top rated parts include Sound Solution Muffler with 3.0 stars.
So if you’re in the market for aftermarket Exhaust Mufflers to keep your 1976 Chevrolet C20 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Exhaust Mufflers Brands To Make Your 1976 Chevrolet C20 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1976 Chevrolet C20 demands trusted brand parts and products to keep it running. Many trusted brands of Exhaust Mufflers make up Advance Auto Parts’ inventory, and all are ready to help make your C20 the best it can be. Be sure to browse some of our top Exhaust Mufflers brands and parts.
Popular Flowmaster Inc. Exhaust Mufflers
We carry Flowmaster Inc. parts in our stock across Mufflers categories, plus more. For a 1976 Chevrolet C20, our most popular Flowmaster Inc. Exhaust Mufflers include:
from
$126.99
(1)
Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound
Mufflers
from
$99.99
(13)
40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound
Mufflers
FAQs for 1976 Chevrolet C20 Exhaust Mufflers
What are the most purchased Exhaust Mufflers for the 1976 Chevrolet C20?
Out of 13 Exhaust Mufflers for the 1976 Chevrolet C20, the most popular in our inventory are:
from
$85.99
This product is not rated
SoundFX Muffler, Direct Replacement, No Fabrication Needed
Mufflers
from
$105.99
This product is not rated
Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed
Mufflers
What are the top-rated 1976 Chevrolet C20 Exhaust Mufflers?
Top-rated Exhaust Mufflers for your 1976 Chevrolet C20 based on customer reviews/ratings are:
from
$62.99
(1)
Sound Solution Muffler
“Simple product low price and does what is needed for the results in replacement”
