1976 BMW 530i Fuel and Emissions Systems
More 1976 BMW 530i Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1976 BMW 530i, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1976 BMW 530i Fuel and Emissions Systems
VDO – Fuel Pump Tank Seal (Part No.E300462593VDO)
from
$4.98
Fuel Pump Tank Seal
Carquest Premium – Reman Multi Port Fuel Injector (Part No.A212-2385)
from
$59.99
Product Features:
See More
- Each unit is 100% tested to OE specifications.
- Includes new o-rings and seals made of premium OE quality materials.
- Includes application specific technical bulletin, where applicable.
Bosch – Port Fuel Injector (Part No.C1000422361BOS)
from
$69.09
Port Fuel Injection (PFI) is the world’s most widely used system for internal combustion engines and offers many advantages for engines with a low pressure output.
Product Features:
See More
Product Features:
- Low-pressure systems are less complex and more affordable than high-pressure systems
- Robust combustion process tolerates lower-quality fuel
- Maintenance-friendly design reduces the overhead for system diagnostics
Carquest Premium – Remanufactured Fuel Injector (Part No.A212-2085)
from
$39.49
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Carquest Premium – Remanufactured Fuel Injector (Part No.A213-1125)
from
$43.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Delphi – Fuel Pump Module Assembly: With Float Arm (Part No.FG1239)
from
$358.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
Pierburg – Electric Fuel Pump (Part No.E300065558APG)
from
$409.38
PIERBURG Fuel Pumps excel through their highly developed technology, optimum pumping characteristics when hot, and their low noise level. For over 80 years PIERBURG has been a leading manufacturer of fuel pumps for European vehicles
Product Features:
See More
Product Features:
- Made in Europe – 100% from OE factories and thus OE Standard
- Optimal hot fuel supply properties and low noise level
- Online Service and Product Information
- Provides OE performance and dependability Installation Note: To avoid future warranties clean tank and change fuel filter when installing a new pump
Bosch – Turbine Electric Fuel Pump Assembly (Part No.E3001458354BOS)
from
$289.93
Benchmark quality from the worldwide leader in fuel injection technology. Bosch state-of-the-art turbine fuel pumps offer many advantages when compared to older roller-cell and inner-gear pump designs. These pumps offer near silent operation and improved drivability, the core components of this turbine design significantly reduce wear and deliver a longer service life. Bosch Turbine Fuel Pumps are nearly identical in dimension and appearance to the units they replace for a precise fit every time. Plus, application-specific, illustrated step-by-step instructions are included with all Bosch Turbine Fuel Pumps for safe and easy installation. To prevent hot start problems, Bosch includes a non-return valve that maintains system pressure long after the vehicle has been shut off.
Product Features:
See More
Product Features:
- OE-Equivalent Direct fit for easy installation.
- OE connections and fittings.
- Superior turbine pump design that virtually eliminates fuel pulsation.
- Precision, spin-balanced armature to reduce noise and vibration.
- Premium carbon brushes, utilizing advanced materials.
- Noise suppression coil that eliminates radio frequency interference.
- Illustrated step-by-step instructions are included.
Delphi – Fuel Pump and Strainer Set: With Isolators, Metal Clamp, Zip Ties (Part No.FE0538)
from
$198.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- When servicing the fuel system, always check the fuel filter for possible replacement
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Rein – Hose Clamp (Part No.Y3063860432RIN)
from
$3.57
Hose Clamp
Carquest Premium – Fuel Cap: 10844, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10844)
from
$39.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Rein – Cap-Fuel (Part No.CPF0031)
Febi-Bilstein – Fuel Tank (Gas) Cap (Part No.E201066969FEB)
from
$32.79
Febi Fuel Tank Caps are manufactured to meet OE quality, and performance for reliable operation.
Product Features:
See More
Product Features:
- Meets OE vehicle standards
- Factory type retaining strap for user convenience
- OE quality seal ensures fuel tank emissions are maintained preventing check engine warnings.
Carquest Premium – Locking Fuel Cap: 10582, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10582)
from
$19.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Rein – OE Quality Automotive Fuel Tank Cap (Part No.E2010379639RIN)
from
$40.83
This is an OE quality fuel cap. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.
Product Features:
See More
Product Features:
- Original Equipment fit, form and function
- Manufactured from high quality materials
- Right fit the first time
- O ring is black in color
- For European vehicles
Carquest Premium – Fuel Cap: 10810, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10810)
from
$9.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Popular 1976 BMW 530i Fuel and Emissions Systems Categories
1976 BMW 530i Fuel and Emissions Systems
You count on your 1976 BMW 530i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 9 Fuel and Emissions Systems ranging in price from $3.57 to $147.99, you’re sure to find everything you need for your 1976 BMW 530i.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 5 different brands like Delphi, Carquest Premium, and Febi-Bilstein. 1976 BMW 530i Fuel and Emissions Systems start as low as $3.57!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 4 extensive product reviews on 1976 BMW 530i Fuel and Emissions Systems.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1976 BMW 530i below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1976 BMW 530i
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1976 BMW 530i running right for years to come. In our inventory you’ll find brands like Delphi, Carquest Premium, Febi-Bilstein, and even more.
Popular Carquest Premium Fuel and Emissions Systems
You’ll find popular Carquest Premium brand products across Gas Caps. All are waiting to get your 1976 BMW 530i back on the road. Some of the top-rated Carquest Premium products in these categories are:
FAQs for 1976 BMW 530i Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1976 BMW 530i?
Out of 9 Fuel and Emissions Systems for the 1976 BMW 530i, the most popular in our inventory are:
