1975 Porsche 911 Brake Parts

Essential 1975 Porsche 911 Brake Parts

Original Equipment – Parking Brake Shoe (Part No.N500028310OEA)

Parking Brake Shoe

from

$32.10
Parking Brake Shoe

Carquest Wearever – Parking Brake Shoes (Part No.S816)

Parking Brake Shoes

from

$29.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design.
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5723)

Vacuum Brake Booster: Without Master Cylinder

from

$197.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5755)

Vacuum Brake Booster: Without Master Cylinder

from

$122.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104022639ATE)

Original Brake Caliper, New - Friction Ready

from

$736.28
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104022641ATE)

Original Brake Caliper, New - Friction Ready

from

$697.81
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Carquest Wearever – Disc Brake Hardware Kit (Part No.13614)

Disc Brake Hardware Kit

from

$13.99
Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Exact fitment and original replacement
  • New Brake Hardware prevents premature wear and maximizes performance
  • Helps deliver a quieter, more efficient braking system
  • Manufactured with quality materials to suppress high stress levels
See More

ATE – Disc Brake Hardware Kit (Part No.N1061237984ATE)

Disc Brake Hardware Kit

from

$45.77
The ATE disc brake hardware kits provide everything you need to perform a complete the brake job and restore the brake system back to the optimal operating condition.

Product Features:
  • Reduced Brake Noise, comebacks and unsatisfied customers,
  • Extends the life of a brake job,
  • Improved fuel mileage, and
  • Restores brakes to like new Performance. Effects of Corrosion, Heat, Stress, Use Rust and Corrosion on floating caliper slides or bushings can prevent the caliper from centering properly, which can
  • reduce effective braking force
  • cause uneven pad wear, and brake noise. Rubber Bushings lose there resiliency and become flattened from the torque of the braking system which can
  • cause excessive caliper movement
  • cause unwanted noise like rattles and thumps. New Hardware = Back to like-new performance
See More

Carquest Premium Gold – Brake Pad Set – Gold Semi-Metallic (Part No.GMKD994)

Brake Pad Set - Gold Semi-Metallic

from

$51.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific formulations designed for extended pad life and clean wheels
  • Multi-layer shim for near silent braking
  • OE designed slots and chamfers for consistent performance
  • Hardware included on popular and late-model applications
See More

Carquest Standard – Brake Pads : Rear, Reliable and Dependable Stopping (Part No.NAD1925)

Brake Pads : Rear, Reliable and Dependable Stopping

from

$43.49
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Original Equipment – Clutch Return Spring (Part No.I400783106OEA)

Clutch Return Spring

from

$13.06
The Original Equipment Clutch Return Spring is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Sebro – Coated OE Replacement Brake Rotor (Part No.N10001072727SEB)

Coated OE Replacement Brake Rotor

from

$190.81
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH424963)

Disc Brake Rotor Meets or Exceeds OE Design

from

$112.99
Carquest Premium painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Premium painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Premium painted brake rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to prevent warping
  • Air gap eliminates brake fade and increases pad life
  • Non-Directional finish decreases break-in time
See More

FTE – Brake Caliper Repair Kit (Part No.N105052612FTE)

Brake Caliper Repair Kit

from

$38.96
FTE Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

ATE – Brake Caliper Repair Kit (Part No.N105082725ATE)

Brake Caliper Repair Kit

from

$46.21
ATE Disc Brake Caliper Repair Kit contains the components necessary for piston seal repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

ATE – Brake Caliper Repair Kit (Part No.N105022429ATE)

Brake Caliper Repair Kit

from

$26.23
ATE Disc Brake Caliper Repair Kit contains the components necessary for piston seal repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

ATE – ATE Brake Master Cylinder (Part No.N300022652ATE)

ATE Brake Master Cylinder

from

$489.65
As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:
  • Short closing paths
  • Low volume uptake
  • High efficiency
  • Low throttling / after-suction resistance
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
  • Compact design – ideal for installation in small spaces
  • Reduced weight – by roughly 20% compared to conventional central valve technology
  • Fewer components – almost half as many as compared to conventional technologies
  • Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
  • Low volume uptake – minimized elastic deformations due to smaller seals
  • Sealing cups supported in the housing – robustness against soiling and wear; longer life
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
See More

TRW – TRW Brake Master Cylinder (Part No.N300061769TRW)

TRW Brake Master Cylinder

from

$173.70
TRW Automotive supplies master cylinder brake actuation systems featuring quality and performance. TRW’s master cylinder product portfolio covers a wide range of vehicles, from small cars up to truck and SUV platforms. These systems can offer lighter weight, with options such as micro master cylinders and aluminum master cylinders through to heavy-duty master cylinders designed for the durability and variable loading conditions of the light-truck market. These systems function with the help of a series of brake fluid sensors, which are located on the reservoir tank. This series includes vacuum sensors, brake light switches, and travel sensors.

Product Features:
  • Low volume uptake
  • High efficiency
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
See More

TRW – Brake Master Cylinde (Part No.N30001674468TRW)

Brake Master Cylinde

from

$356.41
TRW Automotive supplies master cylinder brake actuation systems featuring quality and performance. TRW’s master cylinder product portfolio covers a wide range of vehicles, from small cars up to truck and SUV platforms. These systems can offer lighter weight, with options such as micro master cylinders and aluminum master cylinders through to heavy-duty master cylinders designed for the durability and variable loading conditions of the light-truck market. These systems function with the help of a series of brake fluid sensors, which are located on the reservoir tank. This series includes vacuum sensors, brake light switches, and travel sensors.

Product Features:
  • Low volume uptake
  • High efficiency
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
See More

PowerStop – Z17 Low-Dust Ceramic Brake Pads with Hardware (Part No.17-917)

Z17 Low-Dust Ceramic Brake Pads with Hardware

from

$57.99
The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium hardware for easy installation
See More

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-1741)

Z16 Low-Dust Ceramic Brake Pads

from

$64.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise-free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
See More

PowerStop – Z17 Low-Dust Ceramic Brake Pads with Hardware (Part No.17-1389)

Z17 Low-Dust Ceramic Brake Pads with Hardware

from

$61.99
The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium stainless-steel hardware for easy installation
See More

Carquest Premium Gold – Semi-Metallic Brake Pads – Front (4-Pad Set) (Part No.GMKD1389)

Semi-Metallic Brake Pads - Front (4-Pad Set)

from

$53.99
Carquest Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific formulations designed for extended pad life and clean wheels
  • Multi-layer shim for near silent braking
  • OE designed slots and chamfers for consistent performance
  • Hardware included on popular and late-model applications
See More

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104022646ATE)

Original Brake Caliper, New - Friction Ready

from

$697.37
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104022647ATE)

Original Brake Caliper, New - Friction Ready

from

$685.98
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

1975 Porsche 911 Brake Parts

You count on your 1975 Porsche 911 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 23 Brake Parts ranging in price from $1.50 to $736.28, you’re sure to find everything you need for your 1975 Porsche 911.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 11 different brands like Cardone, Carquest Premium, and Original Equipment. 1975 Porsche 911 Brake Parts start as low as $1.50!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 64 extensive product reviews on 1975 Porsche 911 Brake Parts. Some of the top-rated Brake Parts products we carry are ThermoQuiet Disc Brake Pad Set with 4.5 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1975 Porsche 911 below to get started!

Top-Rated Brake Parts Brands For Your 1975 Porsche 911

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1975 Porsche 911 running right for years to come. In our inventory you’ll find brands like Cardone, Carquest Premium, Original Equipment, and even more.

Popular Cardone Brake Parts

You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 1975 Porsche 911 back on the road. Some of the top-rated Cardone products in these categories are:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders

FAQs for 1975 Porsche 911 Brake Parts

What are the most purchased Brake Parts for the 1975 Porsche 911?

Out of 23 Brake Parts for the 1975 Porsche 911, the most popular in our inventory are:
Brake Disc Set Screw
from $1.50
This product is not rated
Brake Disc Set Screw
Brake Disc Screws
Coat-Z Sport Brake Disc (Rotor)
from $124.90
This product is not rated
Coat-Z Sport Brake Disc (Rotor)
Front Brake Rotors
Ceramic  Pads Ultra-Premium
from $57.99
This product is not rated
Ceramic Pads Ultra-Premium
Rear Brake Pads and Shoes

What are the top-rated 1975 Porsche 911 Brake Parts?

Top-rated Brake Parts for your 1975 Porsche 911 based on customer reviews/ratings are:
ThermoQuiet Disc Brake Pad Set
from $15.00
(2)
ThermoQuiet Disc Brake Pad Set
“I have only had these on for 2 weeks but so far I see now brake dust on the alloy wheels.”