1975 Pontiac Grand Prix Ignition Wires
More 1975 Pontiac Grand Prix Ignition Wires
Find your specific 1975 Pontiac Grand Prix original or aftermarket Ignition Wires below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1975 Pontiac Grand Prix Ignition Wires
Accel – GM Sb Hei 86-75 Over Vlv Cvr (Part No.9011C)
from
$181.99
ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 Ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.
Product Features:
See More
Product Features:
- Ceramic boots withstand up to 2,000░ Fahrenheit
- Ceramic boots withstand up to 2,000° Fahrenheit
- 8mm double silicone construction black wire rated at 600░ F rated
- 8mm double silicone construction black wire rated at 600° F rated
- 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
- Universal and custom fit applications
- Universal And Custom Fit Applications
NGK – NGK Wire Set (Part No.51388)
from
$46.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Dorman – Help – Spark Plug Boot Adapters (Part No.49808)
from
$11.49
Worn spark plug boots causing rough idling and unpredictable power delivery? This quality spark plug boot is a direct replacement for the factory part to help restore proper engine performance caused by a damaged original boot.
Product Features:
See More
Product Features:
- Direct replacement – this spark plug boot matches the fit and function of the original part to restore proper engine performance
- Application-specific – validated to ensure trouble-free installation on specified years, makes and models
- Durable construction – manufactured from quality materials for long service life
- Trustworthy design – backed by 100 years of automotive aftermarket experience
NGK – NGK Wire Set (Part No.51355)
from
$32.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9748RR)
from
$92.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit (Part No.35-6154)
from
$52.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9608N)
from
$58.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest Premium – Spark Plug Wire Set (Part No.35-6117)
from
$31.99
CARQUEST Premium wire sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements and retain the original color, performance, fit, form and function of the OE wire.
Product Features:
See More
Product Features:
- SAE J2031 Class E cable resists heat, cold and electrical interference
- O.E./O.E.S. specified wire lengths
- O.E./O.E.S. specified insulators
- Limited lifetime warranty
ACDelco – Spark Plug Wire Set (Part No.748RR)
from
$145.99
ACDelco GM Original Equipment Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Durable to help transfer high voltage pulses without damage
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7001)
from
$9.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
NGK – NGK Wire Set (Part No.51340)
from
$44.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Carquest Premium – Spark Plug Wire Set: 6 Wires, Increased performance, Designed for direct fit (Part No.35-6122)
from
$34.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
NGK – NGK Wire Set (Part No.51107)
from
$34.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Bosch – OE Finewire Double Iridium Spark Plug (Part No.F1000404883BOS)
from
$12.94
4X longer service life compared to standard copper plugs Bosch OE Finewire Iridium is engineered to deliver both High performance and long life. The Bosch Iridium Plug provides original equipment design, materials and processes represent the best of OE technology. The ultra fine wire design and laser welded tapered ground electrode deliver optimum performance, while the iridium center electrode and platinum ground electrode help it to go the distance. Center Electrode Core Material: Nickel-Yttrium and Copper and Iridium – Center Electrode Tip Material: Iridium – Ground Electrode Tip Material: Nickel-Yttrium and Iridium
Product Features:
See More
Product Features:
- OE design for optimum fit and function
- Center electrode is an ultra fine wire design.
- Provides broader heat range to resist pre-ignition and fouling
- Delivers exceptional ignitability and performance
- Tapered shape ground electrode
- Laser welded iridium-platinum alloy inlay
- Nickel-plated shell with rolled threads
- Anti-seize and corrosion protection
Accel – 8Mm Super Stock Graphite Uni (Part No.4041)
from
$63.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)
from
$153.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
PerTronix – 808305 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Blue (Part No.808305)
from
$67.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and
Product Features:
See More
Product Features:
- PerTronix 808305 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Blue
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
PerTronix – 808204 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Black (Part No.808204)
from
$72.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and
Product Features:
See More
Product Features:
- PerTronix 808204 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Black
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
MSD Ignition – Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI (Part No.31179)
from
$143.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.
Product Features:
See More
Product Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Incl. both socket-style and spark plug-style boots and terminals
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size Includes [6] 90 Deg. Boots/Terminals
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)
from
$133.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)
from
$82.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and
Product Features:
See More
Product Features:
- PerTronix 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Accel – 8Mm Super Stock Graphite Uni (Part No.4041R)
from
$63.29
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
PerTronix – 808409 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Red (Part No.808409)
from
$67.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and
Product Features:
See More
Product Features:
- PerTronix 808409 Flame-Thrower Spark Plug Wires 8 cyl 8mm GM HEI Custom Fit Red
- Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Accel – Universal Fit Super Stock 8mm Spiral; Spark Plug Wire Set (Part No.5041R)
from
$94.39
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these Super Stock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- 500 Ohms Per Foot Of Resistance
- 550 Degree F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street/Strip Use
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
Accel – Universal Fit Super Stock 8mm Spiral; Spark Plug Wire Set (Part No.5041B)
from
$89.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these Super Stock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- Silicone Spark Plug Boots
- 90 Degree Spark Plug Boot Angle
- 450 Degree Wire Temperature Rating
- Meets Or Exceeds OE Boot Temperature Rating
- Meets or Exceeds OE Resistance
- Cooper Core
- 500 Ohms Resistance
Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5041K)
from
$103.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- 500 Ohms/ft Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street And Strip Use
- Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- 8mm High Gloss Silicone Jacket
Accel – 8Mm Super Stock Spiral Uni Rd (Part No.5040R)
from
$101.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- 500 Ohms/ft Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street And Strip Use
- Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- 8mm High Gloss Silicone Jacket
Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040)
from
$63.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
Popular 1975 Pontiac Grand Prix Ignition Wires Categories
1975 Pontiac Grand Prix Ignition Wires
Maybe you’re in the middle of a full rebuild of that 1975 Pontiac Grand Prix. Maybe you just need a couple of Ignition Wires. Either way, Advance Auto Parts has 10 different Ignition Wires in our inventory ranging from $46.49 to $181.99. That means you can find the exact parts or products you need to keep that 1975 Pontiac Grand Prix running smoothly.
Ignition Wires are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1975 Pontiac Grand Prix. MSD Ignition, PerTronix, and Mallory are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Wires for your 1975 Pontiac Grand Prix, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 27 reviews in this category, some of the top rated parts include Mallory Prosidewinder 90F Univ. Wire Set with 4.0 stars.
So if you’re in the market for aftermarket Ignition Wires to keep your 1975 Pontiac Grand Prix rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Wires Brands To Make Your 1975 Pontiac Grand Prix Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1975 Pontiac Grand Prix demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Wires make up Advance Auto Parts’ inventory, and all are ready to help make your Grand Prix the best it can be. Be sure to browse some of our top Ignition Wires brands and parts.
Popular MSD Ignition Ignition Wires
We carry MSD Ignition parts in our stock across Optional Spark Plug Wires categories, plus more. For a 1975 Pontiac Grand Prix, our most popular MSD Ignition Ignition Wires include:
from
$129.99
(3)
Wire Set; Black Super Conductor; 8-cyl. Multi-Angle; Universal
Optional Spark Plug Wires
FAQs for 1975 Pontiac Grand Prix Ignition Wires
What are the most purchased Ignition Wires for the 1975 Pontiac Grand Prix?
Out of 10 Ignition Wires for the 1975 Pontiac Grand Prix, the most popular in our inventory are:
from
$82.99
This product is not rated
808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red
Optional Spark Plug Wires
from
$81.99
(1)
808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red
Optional Spark Plug Wires
What are the top-rated 1975 Pontiac Grand Prix Ignition Wires?
Top-rated Ignition Wires for your 1975 Pontiac Grand Prix based on customer reviews/ratings are:
from
$133.99
(1)
Mallory Prosidewinder 90F Univ. Wire Set
“Good quality wires with low impedence. The Advance listing says to get part 669 if you have male terminal distributor cap. This is not needed – the ”
