1975 Plymouth Roadrunner Drivetrains

Below you will find various in-demand Plymouth Drivetrains, components and accessories for your 1975 Roadrunner. Advance Auto Parts has popular Roadrunner parts like Spindles, Transfer Cases, Universal Joints and more. You’ll also find aftermarket and OEM Drivetrains for other Roadrunner model years including 1968, 1969, 1970, 1971, 1972, 1973, 1974 and more. Select a category of 1975 Plymouth Roadrunner Drivetrains below and start saving instantly.

Popular 1975 Plymouth Roadrunner Drivetrains Categories

Differential Oil

U-Joints

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

U-Joint Strap Kits

Differential Pinion Shaft Lock Bolts

Axle Shaft Bearing Assemblies

Differential Bearings

Differential Pinion Flanges

Bearing Pullers

Drive Shaft Bearings

Axle Shaft Seals

Drive Shaft Slip Yoke Sleeves

Differential Pinion Pilot Bearings

U-Joint Centering Yokes

Differential Cover Bolts

Axle Shaft Bearings

Differential Carriers

Differential Bearing Kits

Input Shaft Bearings

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Cover Plugs

Differential Clutch Packs

Rear Axle Shaft Bearings

Differential Ring and Pinions

U-Joint U-Bolt Kits

Differential End Yokes

Spindle Lock Nuts

Differential Lock Assemblies

Differential Air System Seal Housings

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bearings

Differential Carrier Bearing Adjusters

Rear Housing Cover Gaskets

Differential Pinion Bearing Kits

Axle Shaft Seal Retainers

Drive Shaft Seals

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Spindle Lock Nut Thrust Washers

Differential Carrier Bearing Shims

Spindle Retainers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Oil Pump Housing Seals

Differential Drive Pinion Oil Deflectors

Differential Carrier Bolts

Differential Pinion Gear Washers

Differential Clutch Pack Clips

Universal Joint Strap Bolts

Essential Drivetrains for 1975 Plymouth Roadrunners

from

$15.29

CUP

from

$215.99

Bearing race driver for Dana 60 front, Dana 70U rear, Chrysler 8.75″ with 42 housing, and ’88 and older GM 14T. No return.

Product Features:

Bearing race driver
Fits HM803110 race
All steel construction

from

$349.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Chrysler 8.75″ ’41’ case housing with 25520 carrier races
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.

from

$13.99

Product Features:

Cover gasket
Fits Dana Spicer 60, 70, 70U and 70HD

from

$9.99

Chrysler 8.75″ (coarse spline) pinion nut washer.

Product Features:

Pinion nut washer
Fits Chrysler 8.75″ with 10 spline pinion

from

$596.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!

from

$5.99

Product Features:

Floater roll pin
Fits Dana Spicer 44 and Chrysler 8.75″
Powr Lok positraction only

from

$9.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$7.99

Dana 60 & Dana 70 Power Lok case bolt.

Product Features:

Power Lok case bolt for Dana Spicer 60 and 70
7/16 x 14 thread
3.5″ long
9/16″ hex head

from

$295.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Dana Spicer 60 rear
Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.

from

$19.99

Product Features:

Pinion preload shims for Dana Spicer 60 and 70U

from

$8.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$7.99

Product Features:

Pinion yoke dust shield
Fits Dana Spicer 60 and 70

from

$33.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$6.49

Product Features:

DANA PRELOAD SHIMS (D60 & D70)

from

$98.99

Six piece side gear thrust washer kit for Chrysler 8″ and 9.25″.

Product Features:

Side gear thrust washer kit
Fits Chrysler 8″ and 9.25″

from

$209.99

Product Features:

Fits Chrysler 9.25″ rear with open differential
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$414.99

Yukon Performance steel spool for Dana 60 with 35 spline axles. fits 4.10 and down. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler Dana Spicer 60 with 35 spline axles
4.10 and down ratio only
Provides 100% traction to both wheels at all times
Not recommended for street driven vehicles

from

$1.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$64.99

Differential side bearing screw adjuster for 9.25″ Chrysler.

Product Features:

Side adjuster for Chrysler 9.25″ rear

from

$8.99

C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:

c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
.150″ thick

from

$213.99

Yukon yoke for Chrysler 8.75″ with 10 spline pinion and a 7260 U/joint size. 2.125″ snap ring span, 1.078″ cap diameter. Inside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 8.75″
10 spline
7260 u-joint size
Inside snap ring design
2.125″ snap ring span
1.078″ cap diameter
Strap style

from

$22.99

Product Features:

Rubber fill plug
Fits Chrysler 7.25″, 8.25″ and 9.25″

from

$288.99

Product Features:

Nodular iron for added strength
Thick design
Durable powder coat finish
Magnetic drain plug
Made in USA
High strength stainless steel fasteners

from

$49.99

7260 U/joint strap, Small Chrysler w/ bolts, 7.25, 8.25, 8.75, 9.25.

Product Features:

u-joint strap kit
Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
7260 u-joint size
Includes two straps and four bolts

from

$195.99

This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.

Product Features:

Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications.
Related repair – smart to have on hand when installing a differential ring and pinion.
Durable construction – built for reliable longevity, free of defects in materials and workmanship
Trustworthy quality – backed by team of designers and engineers in the United States

from

$5.99

3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:

Cover bolt for Dana Spicer 60, 70 and 80
3/8″

from

$8.99

Positraction clutch guide.

Product Features:

Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
Compatible with Dura Grip positractions only

Upgrade your 1975 Plymouth Roadrunner with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 1975 Plymouth Roadrunner, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Plymouth or enhancing its overall performance, Drivetrains are key to keeping your Roadrunner functioning at its best. At Advance Auto Parts, we offer a wide selection of 300 Drivetrains for the 1975 Plymouth Roadrunner, designed to meet your needs without breaking the bank. From Spindle replacements to Transfer Cases upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1975 Plymouth Roadrunner at great prices. Our Drivetrains inventory for this model ranges from just $1.49 to $1,566.99, with an average price of $206.09. Our 300 Drivetrains in stock come from 13 trusted brands, so you’re sure to find the right part for your 1975 Plymouth Roadrunner without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1975 Plymouth Roadrunner, we stock popular OEM and aftermarket Drivetrains from top names like Driveworks, National, Yukon Gear, and more. Driveworks Drivetrains start at just $5.49 and boast an impressive 4 stars average rating from customers. National and Yukon Gear also bring quality to the table, with Drivetrains available starting at $3.99, and at an average 4 stars rating. With 810 customer reviews and counting, our 1975 Plymouth Roadrunner Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1975 Plymouth Roadrunner is always ready to roll. We’re committed to providing you with everything you need to keep your Roadrunner in top shape, all in one place. Start shopping confidently below for your 1975 Plymouth Roadrunner!

Best-Selling Spindles for 1975 Plymouth Roadrunners

Enhance the driving experience in your Plymouth with 7 quality Spindle components, starting at $3.49.

show more show less

from

$3.49

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.99

This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.99

Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.99

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.99

Spindle nut retainer, 2.030″ I.D., 8 bent over tabs. This replaces Spicer part number 33733.

Product Features:

Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
2.030″ I.D.
8 bent over tabs

from

$10.99

Spindle nut retainer for Dana 60 & 70, 1.830″ I.D., 10 outer tabs. This replaces Spicer part number 30637.

Product Features:

Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
1.830″ I.D.
10 outer tabs

from

$14.29

This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Top Picks for 1975 Plymouth Roadrunner Universal Joints

Upgrade Plymouth Roadrunners with top-quality Universal Joints parts, including 40 OEM and aftermarket selections for your 1975 model.

show more show less

from

$15.99

DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$37.99

Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$38.99

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$26.99

Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$14.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

For U-Joints 315G, 317, 319 & 457
Contains two 1-1/2″ bolt center clamps and four 1/4-28 x 5/8″ cap screws

from

$29.99

Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$4.99

Universal Joint

from

$25.99

COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$28.99

COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$7.99

This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles.
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$39.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

from

$18.99

1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.

Product Features:

u-joint strap kit
Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
1310 and 1330 u-joint size
Includes two straps and four bolts

from

$10.99

For U-Joints 316 & 458
Contains two 1.54″ bolt center clamps and four 1/4-28 x 5/8″ cap screws

from

$42.99

from

$59.99

Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.

from

$34.99

1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.

Product Features:

u-joint u-bolt kit
Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
1310 u-joint size
Includes two u-bolts and four nuts

from

$16.99

1350 & 1410 U/joint U-bolts, 3/8″ X 1-11/16″, kit.

Product Features:

u-joint u-bolt kit
Fits 1350 and 1410 u-joint size
Includes two u-bolts and four nuts

from

$78.99

Yukon 1350 to 1410 conversion u/joint.

from

$109.99

Yukon 1310 to Mechanics 3R adapter U/Joint.

from

$63.99

Yukon 1350 Lifetime Series U/Joint. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring.

from

$61.99

Yukon 1330 Dual-size cap U/Joint. 3.625″ snap ring span. One set of caps is 1.125″ in diameter and the other is 1.062″. Outside snap ring.

from

$52.99

7290 U/joint strap kit (4 bolts and 2 straps) for Chrysler 7.25″, 8.25″, 8.75″, and 9.25″.

Product Features:

u-joint strap kit
Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
7290 u-joint size
Includes two straps and four bolts

from

$51.99

Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.

from

$53.99

1330 Yukon Lifetime U/Joint. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.

from

$51.99

Yukon 1330 U/Joint with zerk fitting. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.

from

$57.99

1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.

from

$263.99

Yukon flange yoke for Chrysler 9.25″. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 9.25″ rear
29 spline
Round companion flange

from

$203.99

Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 60, 70, 70U and 70HD
29 spline
1310 u-joint size
3.219″ snap ring span
1.062″ cap diameter
Outside snap ring design
U-bolt style

from

$111.99

Yukon 1350 to Mechanics 3R adaptor U/joint.

from

$84.99

Yukon 1410 Lifetime Series U/Joint. 4.188″ span ring span. 1.188″ cap diameter. Outside snap ring.

from

$61.99

Yukon 1410 U/Joint with zerk fitting. 4.188″ snap ring span, 1.118″ cap diameter. Outside snap ring.

from

$49.99

7260 U/joint strap, Small Chrysler w/ bolts, 7.25, 8.25, 8.75, 9.25.

Product Features:

u-joint strap kit
Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
7260 u-joint size
Includes two straps and four bolts

from

$46.99

Universal Joint

from

$37.99

SPICER U-JOINT

from

$31.99

Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.

Product Features:

u-joint strap kit
Fits Dana Spicer 60, 70, 70U, 70HD and 80
1480 u-joint size
Includes two straps and four bolts

from

$17.99

U/joint strap kit, 10.25″, 9.5″, Dana 60, Dana 70, 1350 & 1410.

Product Features:

u-joint strap kit
Fits Ford 10.25″, GM 9.5″, Dana Spicer 60, 70, 70U and 70HD
1350 and 1410 u-joint size
Includes two straps and four bolts

from

$15.99

1330 U/joint U-bolts, 5/16″ X 1-9/16″, (7260 & 7290 BILLET).

Product Features:

u-joint u-bolt kit
Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
1330 u-joint size
Includes two u-bolts and four nuts

from

$10.99

7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:

U-Joint strap bolt
Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
7290 u-joint size

from

$3.99

Universal Joint

In-Demand Drive Shafts and Axles for 1975 Plymouth Roadrunners

Select from 18 premium Drive Shafts and Axles parts for your 1975 Plymouth Roadrunner, with prices ranging from $5.49 to $883.99.

show more show less

from

$5.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$33.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$15.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$21.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$52.99

Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.

Product Features:

Includes axle bearing and seal
Services one side
Torrington Brand
2.530″ O.D.
1.620″ I.D.

from

$117.99

Product Features:

PINION YOKE
CAST:1310
U-BOLT STYLE

from

$7.99

Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.

Product Features:

Rear axle seal
2.530″ O.D.

from

$17.99

9.25″ Chrysler C/clip, 0.205″ wide for 4137429 axle.

Product Features:

c-clip for Chrysler 9.25″ rear
0.205″ thick

from

$7.99

Product Features:

Pinion yoke dust shield
Fits Dana Spicer 60 and 70

from

$883.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$289.99

Yukon yoke for Chrysler 9.25″ with a 7260 U/joint size. 2.125″ snap ring span, 1.078″ cap diameter. Inside snap ring.All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 9.25″ rear
29 spline
7260 u-joint size
Inside snap ring design
2.125″ snap ring span
1.078″ cap diameter
Strap style

from

$233.99

Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 60 and 70
29 spline
1310 u-joint size
Outside snap ring design
3.219″ snap ring span
1.062″ cap diameter
Strap style

from

$219.99

Yukon replacement yoke for Dana 60 and 70 with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 60, 70, 70U and 70HD
29 spline
1350 u-joint size
3.625″ snap ring span
1.188″ cap diameter
Outside snap ring design
U-bolt style

from

$187.99

Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.0625″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a strap style yoke.

Product Features:

Fits Dana Spicer 60, 70, 70U and 70HD
29 spline
1330 u-joint size
3.625″ snap ring span
1.062″ cap diameter
Outside snap ring design
Strap style

from

$179.99

Yukon replacement yoke for Dana 60 and 70 with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 60, 70, 70U and 70HD
29 spline
1350 u-joint size
3.625″ snap ring span
1.188″ cap diameter
Outside snap ring design
Strap style

from

$64.99

BEARING – CRB

from

$14.99

Dana 60 semi-float C-clip.

Product Features:

C-clip
Fits Dana Spicer 60

from

$13.99

CONE

Most Sold 1975 Plymouth Roadrunner Differentials

Explore our best-selling Plymouth parts for the 1975 Roadrunner among 231 OEM and aftermarket options starting from $2.29.

show more show less

from

$7.49

High-quality Differential Component Shim

Product Features:

SHIM KIT FITS-8.25-F7.5-AMC20-GM0

from

$2.49

Product Features:

CRUSH SLEEVE 7.25 & 8.25 MIN ORDER 5000

from

$384.99

This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:

Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications.
Effective fix – eliminates grinding and whining from failed original bearings.
Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
Trustworthy quality – backed by team of designers and engineers in the United States

from

$195.99

This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.

Product Features:

Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications.
Related repair – smart to have on hand when installing a differential ring and pinion.
Durable construction – built for reliable longevity, free of defects in materials and workmanship
Trustworthy quality – backed by team of designers and engineers in the United States

from

$46.99

Cross pin shaft for standard open Chrysler 9.25″, .860″ diameter. Will not fit posi!

Product Features:

Cross pin shaft for Chrysler 9.25″
Fits standard open differentials only
0.860″ diameter

from

$13.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$23.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$17.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$108.99

Product Features:

CHRYSLER 7.25″ INTERNAL KIT

from

$219.99

Product Features:

C9.25 OPEN INTERNAL KIT, 1984-UP

from

$28.99

Product Features:

MINI INSTALL KIT CHRYSLER 9.25 9 1/4″

from

$165.99

Product Features:

CHRYS 9 1/4″ OPEN EMPTY CASE CAN USE ABS RING.

from

$419.99

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:

Fits 2010 and down Chrysler 9.25″ rear
9.25″ ring gear diameter
29 spline pinion
12 ring gear bolts
4.11 ratio

from

$8.49

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$178.99

This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.

Product Features:

Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications.
Related repair – smart to have on hand when installing a differential ring and pinion.
Durable construction – built for reliable longevity, free of defects in materials and workmanship
Trustworthy quality – backed by team of designers and engineers in the United States

from

$57.99

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

from

$2.49

Product Features:

RING GEAR BOLT 8.5″ 7.5″ 7/16 X 20 LEFT HAND

from

$9.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$5.99

3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:

Cover bolt for Dana Spicer 60, 70 and 80
3/8″

from

$9.99

Ring gear bolt for Chrysler 9.25″ rear, 7/16″ x 18.

Product Features:

Ring gear bolt for Chrysler 9.25″ rear

from

$15.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$4.99

Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.

Product Features:

Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
1/2″ x 18 thread

from

$8.99

Product Features:

Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
For Trac Loc positraction applications only

from

$16.99

Product Features:

Brand may vary by location

from

$37.99

Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:

Redi-Sleeve yoke saver
Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD

from

$309.99

from

$7.99

Product Features:

CHRY 8 3/4″ RING GEAR BOLTS C 8.25″

from

$13.99

Product Features:

Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80

from

$12.99

Product Features:

KIT SHIM

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$10.99

Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.

Product Features:

Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
7/8″ x 14 thread

from

$6.49

Product Features:

DANA PRELOAD SHIMS (D60 & D70)

from

$286.99

Product Features:

CHRY 12BLT 9.25 R&P-3.55 RATIO

from

$19.99

Product Features:

Pinion preload shims for Dana Spicer 60 and 70U

from

$209.99

Product Features:

Fits Chrysler 9.25″ rear with open differential
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$57.99

Product Features:

Crush sleeve eliminator kit for GM 8.5″, 8.6″ and Chrysler 9.25″ rear

from

$26.99

Product Features:

Pinion nut
Fits Chrysler 7.25″, 8.0″, 8.25″, 9.25″ and 8.75″ with 29 spline pinion

from

$137.99

Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil

from

$64.99

Differential side bearing screw adjuster for 9.25″ Chrysler.

Product Features:

Side adjuster for Chrysler 9.25″ rear

from

$16.99

7.25″ & 8.25″ Chrysler pinion seal.Yukon Mighty seal.

Product Features:

Pinion seal
Fits Chrysler 7.25″ and 8.25″

from

$79.99

Seal housing for Dana 60, Zip locker, with o-rings.

Product Features:

Seal housing for Dana Spicer 60
Includes o-rings

from

$18.99

Product Features:

CARRIER SHIM-DANA 60 & 70

from

$15.99

Bolt/screw for adjuster lock for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:

Side adjuster lock bolt
Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″

from

$9.99

Product Features:

Inner oil slinger for Dana Spicer 60

from

$7.99

Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:

Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
0.225″ diameter
1.870″ long

from

$5.99

Product Features:

Outer oil slinger for Dana Spicer 60, 70, 70U and 70HD

Top-Rated Drivetrains Brands For Your 1975 Plymouth Roadrunner

Shop for the best-rated brands offering Drivetrains and other products for your 1975 Plymouth Roadrunners. Below you’ll find some of our best rated Drivetrains from Driveworks, National, and Yukon Gear, and more. Drivetrains from these brands that fit a 1975 Roadrunner start at just $3.99 and are rated as high as 4 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Driveworks 1975 Plymouth Roadrunner Drivetrains

When it comes to maintaining or upgrading your 1975 Plymouth Roadrunner, using quality Drivetrains is essential to ensure durability and a perfect fit. Driveworks ticks all of those boxes. We offer a wide selection of Driveworks Drivetrains, specifically designed for the 1975 Plymouth Roadrunner. With over 7 Driveworks brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.49, with an average price of just $13.46. Plus, with over 56 customer reviews and an average rating of 4 stars, you can trust that our Driveworks Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$16.99

This product is not rated

Tapered Roller Bearing

“”

from
$6.49

This product is not rated

Taper Bearing Cup

“”

from
$19.29

This product is not rated

Taper Bearing Cone

“”

Popular National 1975 Plymouth Roadrunner Drivetrains

National auto parts is one of the highest quality Drivetrain brands in the market. Any 1975 Plymouth Roadrunner owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1975 Roadrunner, Advance Auto Parts carries a full inventory of 7 National Drivetrains. Plus you will be keeping your Plymouth in peak condition while saving money because prices on these National Drivetrains range from $9.49 to $33.99, plus, with more than 17 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from
$15.49

This product is not rated

Bearings

“”

from
$9.49

This product is not rated

Bearings

“”

from
$33.99

(1)

Shaft Repair Sleeve

“Product was in stock didn’t leak and worked the first time”

FAQs for 1975 Plymouth Roadrunner Drivetrains

Which Drivetrains are best-sellers for 1975 Plymouth Roadrunners?

Out of 300 Drivetrains that fit 1975 Plymouth Roadrunners, the following parts are the top sellers:

DIFFERENTIAL GASKET (5785308) – $6.79
3 Qt – 80W90 Conventional Gear Oil With Posi Additive (11645418) – $57.99
Bearings (5052513) – $23.99

What’s the price range for 1975 Plymouth Roadrunner Drivetrains?

Drivetrain prices for the 1975 Plymouth Roadrunner start at $1.49 and go up to $1,566.99 for the most premium parts.

What’s the average price of a Drivetrain for a 1975 Plymouth Roadrunner?

The average price for Drivetrains for the 1975 Plymouth Roadrunner is $206.09. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Plymouth Roadrunner model years?

Yes, we currently carry Drivetrains for 7 model years of Plymouth Roadrunners between 1968 and 1974. Drivetrains are bought most frequently for the following model years: 1974, 1973, 1972, 1971, 1970, 1969, and 1968.

What are the cheapest Drivetrains for my 1975 Plymouth Roadrunner?

The cheapest 1975 Plymouth Roadrunner Drivetrains we carry in stock are:

Engine Oil Pump Cover Seal (3203417) – $1.49
Differential Crush Sleeve (20520218) – $2.29
Ring Gear Bolt (20520168) – $2.49
Differential Crush Sleeve (20520219) – $2.49
Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (21260547) – $3.49

What are the top-rated Drivetrains that fit the 1975 Plymouth Roadrunner?

Out of 810 reviews by customers, our 1975 Plymouth Roadrunner Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1975 Plymouth Roadrunner and their top-rated products:

Universal Joints
- Universal Joint (10265723) – $15.99
- Greaseable Super Strength Universal Joint (10087213) – $38.99
- Universal Joint Strap Kit (10086992) – $14.99
Differentials
- Universal Joint (10265723) – $15.99
- Greaseable Super Strength Universal Joint (10087213) – $38.99
- Universal Joint Strap Kit (10086992) – $14.99
Spindles
- Universal Joint (10265723) – $15.99
- Greaseable Super Strength Universal Joint (10087213) – $38.99
- Universal Joint Strap Kit (10086992) – $14.99

What types of Drivetrains do you sell for my 1975 Plymouth Roadrunner?

As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 1975 Plymouth Roadrunner:

Can I get help with 1975 Plymouth Roadrunner Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Plymouth Drivetrains and more.

What is your return policy for Plymouth Roadrunner Drivetrains?

Advance Auto Parts keeps returns simple. For new Plymouth Roadrunner Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1975 Plymouth Roadrunner Drivetrains

FAG US – CUP (Part No.M802011)

Yukon Gear – Bearing Race Driver (Part No.56011)

USA Standard Gear – Master Overhaul Kit for Chrysler 8.75" #41 Housing with 25520/90 Differential bearings (Part No.37092)

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Yukon Gear – Chrysler 8.75" (Coarse Spline) Pinion Nut Washer (Part No.33162)

Powertrax – Grip PRO Traction System (Part No.GT436035)

Yukon Gear – Replacement Floater Roll Pin For Dana 44 & 8.75" Chrysler Power Lok (Part No.33326)

National – Bearings (Part No.M86610)

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Yukon Gear – Pinion Install Kit For Dana 60 Rear Differential (Part No.13032)

Yukon Gear – Replacement Pinion Preload Shims For Dana 60, Dana 61 & Dana 70-U (Part No.55015)

Felpro – DIFFERENTIAL GASKET (Part No.RDS 6095-1)

Yukon Gear – Pinion Yoke Dust Shield For Dana 60 & 70 (Part No.33441)

National – Shaft Repair Sleeve (Part No.99106)

Motive Gear – Differential Pinion Shim Kit (Part No.1118)

Yukon Gear – Six Piece Side Gear And Thrust Washer Kit For Chrysler 8" And 9.25" (Part No.33278)

USA Standard Gear – Open Spider Gear Set For Chrysler 9.25", 31 Spline (Part No.39004)

Yukon Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.10 & Down (Part No.32042)

Felpro – Engine Oil Pump Cover Seal (Part No.13338)

Yukon Gear – Differential Side Bearing Screw Adjuster For 9.25" Chrysler (Part No.33256)

Yukon Gear – C/Clip (Part No.33083)

Yukon Gear – Yoke For Chrysler 8.75" With 10 Spline Pinion And A 7260 U/Joint Size (Part No.41006)

Yukon Gear – Rubber Fill Plug For Chrysler (Part No.33463)

Yukon Gear – Hardcore Diff Cover For Dana 50, Dana 60 & Dana 70 (Part No.32352)

Yukon Gear – 7260 U/Joint Strap, Small Chrysler With Bolts, 7.25, 8.25, 8.75, 9.25 (Part No.41192)

Dorman – Ring and Pinion Bearing Installation Kit (Part No.697-108)

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Yukon Gear – Positraction Clutch Guide (Part No.33352)

Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (Part No.615-072.1)

Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Part No.615-073.1)

Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each) (Part No.615-073)

Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)

Yukon Gear – Spindle Nut Retainer, 2.030" I.D., 8 Bent Over TABS (Part No.33480)

Yukon Gear – Spindle Nut Retainer For Dana 60 & 70, 1.830" I.D., 10 Outer TABS (Part No.33477)

Dorman – Spindle Washer – I.D. 19.1mm O.D. 41.6mm Thickness 2.6mm (sold by each) (Part No.618-061)

Driveworks – Taper Bearing Cup (Part No.S-HM-88610)

Driveworks – Taper Bearing Cone (Part No.S-HM-88649)

Felpro – Engine Oil Pump Cover Seal (Part No.13338)

FAG US – CONE (Part No.KM86649)

Driveworks – Universal Joint (Part No.DW-316)

Driveworks – Universal Joint (Part No.DW-315G)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.246)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.248)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.317)

MOOG Driveline Products – Universal Joint Strap Kit (Part No.318-10)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.245)

Neapco – Universal Joint (Part No.2-1175)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.316)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.315G)

Dorman – Help – U-Joint Repair Kit (Part No.81006)

Spicer – Universal Joint (Part No.5-811X)

Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)

MOOG Driveline Products – Universal Joint Strap Kit (Part No.316-10)

Spicer – Universal Joint (Part No.5-789X)

Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)

Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)

Yukon Gear – 1350 & 1410 U/Joint U-Bolts, 3/8" X 1-11/16", Kit (Part No.41190)

Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)

Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)

Yukon Gear – 1350 Lifetime Series U/Joint (Part No.42021)

Yukon Gear – 1330 Dual-Size Cap U/Joint (Part No.42017)

Yukon Gear – 7290 U/Joint Strap Kit (4 Bolts And 2 Straps) For Chrysler 7.25", 8.25", 8.75", And 9.25" (Part No.41013)

Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)

Yukon Gear – 1330 Lifetime U/Joint (Part No.42004)

Yukon Gear – 1330 U/Joint With Zerk Fitting (Part No.42002)

Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)

Yukon Gear – Flange Yoke For Chrysler 9.25" (Part No.41012)

Yukon Gear – Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size (Part No.41023)

Yukon Gear – 1350 To Mechanics 3R Adaptor U/Joint (Part No.42001)

Yukon Gear – 1410 Lifetime Series U/Joint (Part No.42022)

Yukon Gear – 1410 U/Joint With Zerk Fitting (Part No.42009)

Yukon Gear – 7260 U/Joint Strap, Small Chrysler With Bolts, 7.25, 8.25, 8.75, 9.25 (Part No.41192)

Spicer – Universal Joint (Part No.5-3228X)

Spicer – SPICER U-JOINT (Part No.5-1309X)

Yukon Gear – Dana 60, Dana 70, And Dana 80 Strap Kit (Part No.41194)

Yukon Gear – Dana 60, Dana 70, 1350, 1410, 10.25", And 9.5" U-Joint Strap Kit (Part No.41193)

Yukon Gear – 1330 U/Joint U-Bolts, 5/16" X 1-9/16", (7260 & 7290 Billet) (Part No.41199)

Yukon Gear – 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33246)

Neapco – Universal Joint (Part No.1-6301)