from

$153.99

M804049 set-up bearing (one bearing). No return.

Product Features:

Set up bearing
Fits HM804049 pinion bearing
Easily slips on and off pinion journal to allow for pinion depth adjustment

from

$165.99

Product Features:

CHRYS 9 1/4″ OPEN EMPTY CASE CAN USE ABS RING.

from

$215.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits HM89410 race
All steel construction

from

$10.99

Crush Sleeve for Model 35, Chrysler 7.25″, 8.25″ Ford 8″ & GM 7.75″. Approx 0.495″ long.

Product Features:

Crush sleeve for AMC Model 35, Chrysler 7.25″ and 8.25″, Ford 8″ and GM 7.75″
0.495″ tall

from

$139.99

Dana 44 & 9.25 Chrysler TracLoc clutch kit.

Product Features:

Clutch kit
Fits Dana Spicer 44 and Chrysler 9.25″ Trac Loc positraction

from

$64.99

Differential side bearing screw adjuster for 9.25″ Chrysler.

Product Features:

Side adjuster for Chrysler 9.25″ rear

from

$239.99

Yukon replacement trail repair kit for Dana 60 with 1350 size U/joint and u-bolts. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).

Product Features:

Fits Dana Spicer 60 and 70
1350 u-joint size
Kit includes yoke, U-joint, pinion seal, pinion nut and washer, U-bolts and threadlocker

from

$829.99

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:

Fits Chrysler 9.25″ rear
4-spring, clutch style positraction
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$37.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

Fits 1976 and up Chrysler 8.25″
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$22.99

Product Features:

Rubber fill plug
Fits Chrysler 7.25″, 8.25″ and 9.25″

from

$227.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$12.99

8.75″ Chrysler gasket.

Product Features:

Dropout gasket
Fits Chrysler 8.75″

from

$52.99

Product Features:

USA Standard Gear heavy-duty cross pin shaft
Fits Dana Spicer 60
Works with Spartan Locker or standard open spider gears

from

$8.99

Ring gear bolt for Chrysler 7.25″, 8″ IFS, 8.25″, 8.75″ & GM 7.2″ IFS front. 3/8″ x 24.

Product Features:

Ring gear bolt for Chrysler 7.25″, 8.0″ IFS and 8.75″
3/8″ x 24 thread
.866″ long

from

$12.99

9.25″ pinion gear thrust washer.

Product Features:

Pinion gear thrust washer for Chrysler 9.25″ rear

from

$198.99

Product Features:

Spider gear kit
Fits Dana Spicer 60, 35 spline open differential
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$869.99

Differential

from

$7.49

High-quality Differential Component Shim

Product Features:

SHIM KIT FITS-8.25-F7.5-AMC20-GM0

from

$114.99

Product Features:

Fits standard rotation Dana Spicer 60
Steel

from

$919.99

Yukon yoke for Ford 8.8″ truck or passenger with a 1330 U/joint size. 3.625″ snap ring span, 1.125″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Ford 8.8″
30 spline
1330 u-joint size
3.625″ snap ring span
1.062″ cap diameter
Outside snap ring design
Strap style

from

$10.99

Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.

Product Features:

Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
7/8″ x 14 thread

from

$514.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits standard rotation Dana Spicer 60
9.75″ ring gear diameter
29 spline pinion
12 ring gear bolts
4.30 ratio

from

$159.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits 1976 and up Chrysler 8.25″
Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$39.99

Product Features:

MINI INSTALL KIT CHRYSLER 8.25 8 1/4″

from

$9.99

Product Features:

Cross pin bolt for Dana Spicer 60 with c-clip axles

from

$13.99

Model 35 (standard Open & TracLoc) 8.25″ Chrysler TracLoc cross pin bolt.

Product Features:

Cross pin bolt for AMC Model 35 with c-clip axles

from

$37.99

Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:

Redi-Sleeve yoke saver
Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

1975 Plymouth Fury Differentials

More 1975 Plymouth Fury Differentials

Essential 1975 Plymouth Fury Differentials

Yukon Gear – Set Up Bearing (Part No.56046)

Motive Gear – Differential Carrier (Part No.C9.25E)

Yukon Gear – Bearing Race Driver (Part No.56017)

Yukon Gear – Crush Sleeve (Part No.33093)

Yukon Gear – Dana 44 And Chrysler 9.25" Traclloc Clutch Kit Replacement (Part No.16153)

Yukon Gear – Differential Side Bearing Screw Adjuster For 9.25" Chrysler (Part No.33256)

Yukon Gear – Replacement Trail Repair Kit For Dana 60 With 1350 Size U/Joint And U-Bolts (Part No.32284)

Yukon Gear – Dura Grip For Chrysler 9.25" Rear (Part No.26019)

Yukon Gear – Minor Install Kit For Chrysler 76 & Up 8.25" Differential (Part No.12004)

Yukon Gear – Rubber Fill Plug For Chrysler (Part No.33463)

Pro-King – Differential Internal Nest Kit (Part No.723A717)

Yukon Gear – 8.75" Chrysler Gasket (Part No.23001)

USA Standard Gear – Spartan Locker Replacement Cross Pin For Dana 60 (Part No.17019)

Yukon Gear – Ring Gear Bolt For Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS Front (Part No.33035)

Yukon Gear – 9.25" Pinion Gear Thrust Washer (Part No.33274)

USA Standard Gear – Replacement Spider Gear Set For Dana 60, 35 Spline (Part No.39009)

Yukon Gear – Differential (Part No.26039)

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Yukon Gear – Steel Cover For Dana 60 Standard Rotation (Part No.32321)

USA Standard Gear – Powr Lok Posi For Chrysler 8.75", Aggressive Design (Part No.59026)

Yukon Gear – Pinion Nut (Part No.33142)

Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 60 In A 4.30 Ratio (Part No.24305)

Yukon Gear – Pinion Install Kit For ’76 And Newer Chrysler 8.25" Differential (Part No.13004)

Motive Gear – Differential Gear Install Kit (Part No.C8.25IK)

Yukon Gear – 9.25" Chrysler, Dana 60 Semi-Float X/P Bolt, 80 & Up, 5/16" Head, Tapered Shoulder (Part No.33238)

Yukon Gear – Model 35 (Standard Open & Tracloc) 8.25" Chrysler Tracloc Cross Pin Bolt (Part No.33230)

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Popular 1975 Plymouth Fury Differentials Categories

1975 Plymouth Fury Differentials

Differentials Brands To Make Your 1975 Plymouth Fury Last

Popular Valvoline Differentials

FAQs for 1975 Plymouth Fury Differentials

What are the most purchased Differentials for the 1975 Plymouth Fury?

What are the top-rated 1975 Plymouth Fury Differentials?

More Popular Parts for All Makes