1975 Oldsmobile Cutlass Salon Brake Parts

Essential 1975 Oldsmobile Cutlass Salon Brake Parts

KAI – Brake Backing Plate (Part No.GMK402159570P)

Brake Backing Plate

from

$84.99
New Goodmark Brake Backing Plate, Front Pair

Product Features:
  • Front Pair
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Wearever – Brake Drum – Rear (Part No.YH140454)

Brake Drum - Rear

from

$56.99
CARQUEST Wearever Brake Drums are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and balance that eliminates noise and enhances pedal feel. CARQUEST Wearever Brake Drums are designed to dissipate heat helping to eliminate brake fade and increase the life of your brake shoes. Ready to install out of the box to save you time.

Product Features:
  • Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • OE based design for OE form, fit, and function
  • Proper harmonic design and balance helps to reduce brake noise
  • Optimal metallurgy and casting thickness to preventing warping
  • Ready for immediate “out-of-the-box” installation (after cleaning)
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-71271)

Vacuum Brake Booster: Without Master Cylinder

from

$109.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Dorman – Help – Brake Master Cylinder Gasket (Part No.42074)

Brake Master Cylinder Gasket

from

$9.99
This brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles
  • Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Wearever – Brake Spring Hold-Down Pin (Part No.1107-2)

Brake Spring Hold-Down Pin

from

$2.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Maintains safe movement and effective stopping performance
  • Restores brakes to like-new performance
See More

Carquest Premium – Semi Loaded Disc Brake Caliper (Part No.18-4072)

Semi Loaded Disc Brake Caliper

from

$31.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

Carquest Wearever – Drum Brake Self-Adjuster Repair Kit (Part No.2591)

Drum Brake Self-Adjuster Repair Kit

from

$14.79
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the Life Span and Improves the Performance of the Drum Brakes
  • Manufactured with quality materials to suppress high stress levels
  • Corrosion resistant coating for long-lasting durability against harsh roads
See More

Wagner – Brake Auto Adjuster Hardware Kit (Part No.H2590)

Brake Auto Adjuster Hardware Kit

from

$20.19
A wheel drum hardware kit with adjuster and adjuster springs. Replace worn self-adjusting levers and frozen adjusting screws for proper drum brake self-adjustments.
See More

Carquest Wearever – Brake Hold-Down Spring Cup (Part No.1133-2)

Brake Hold-Down Spring Cup

from

$3.79
The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down spring top cups are designed to provide direct and simple replacement.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Fast and efficient replacement
  • Eliminates heat and corrosion deterioration
See More

Wagner – Brake QuickStop Drum Brake Shoe Set (Part No.N2010978201WAG)

Brake QuickStop Drum Brake Shoe Set

from

$48.82
Wagner® QuickStop® brake shoes utilize professional-grade friction materials that mirror original equipment and utilize OE-required riveted or bonded configurations.

Product Features:
  • Precision ground maximizes friction-to-drum contact
  • Attached levers and pins included to match OE (on specific applications)
  • Comprehensive coverage for foreign and domestic nameplates
  • Install Wagner with total confidence
See More

Carquest Standard – Brake Pads : Front, Reliable and Dependable Stopping (Part No.MKD154)

Brake Pads : Front, Reliable and Dependable Stopping

from

$28.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Carquest Wearever – Brake Rotor (Part No.YH141040)

Brake Rotor

from

$82.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
See More

Carquest Wearever – Brake Rotor (Part No.YH141233)

Brake Rotor

from

$64.99
Carquest Wearever rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Wearever rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Wearever rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA86576)

Brake Hose Assembly: Copper Washers Included

from

$25.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA99292)

Brake Hose Assembly: Copper Washers Included

from

$25.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-1738)

Remanufactured Brake Master Cylinder

from

$26.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-1926)

Remanufactured Brake Master Cylinder

from

$39.49
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Carquest Wearever – Parking Brake Hardware Kit (Part No.7008)

Parking Brake Hardware Kit

from

$9.49
Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance. Industry experts agree – When brake friction materials are ready to be replaced, the hardware should also be replaced.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Contains all the necessary hardware for easy installation
  • Manufactured to restrain high tolerances with quality materials
  • Helps deliver a quieter, more efficient braking system
  • Restores brakes to like-new performance
See More

WBR – Disc Brake Hardware Pro-Kit (Part No.N1061461310WBR)

Disc Brake Hardware Pro-Kit

from

$6.03
New Brake Hardware – Back to like-new performance The WBR complete disc brake hardware kits provide everything you need to perform a complete the brake job and restore the brake system back to the optimal like new operating condition. Disc hardware can lose 50% of spring tension within 1-2 years, which can cause pads to stick, create uneven pad wear, and lead to unwanted brake noise.

Product Features:
  • Reduced Brake Noise, comebacks and unsatisfied customers,
  • Extends the life of a brake job,
  • Improved fuel mileage, and
  • Restores brakes to like new Performance. Effects of Corrosion, Heat, Stress, Use Rust and Corrosion on floating caliper slides or bushings can prevent the caliper from centering properly, which can
  • reduce effective braking force
  • cause uneven pad wear, and brake noise. Rubber Bushings lose there resiliency and become flattened from the torque of the braking system which can
  • cause excessive caliper movement
  • cause unwanted noise like rattles and thumps.
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.H5004)

Disc Brake Caliper Guide Pin Kit

from

$4.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Helps deliver a quieter, more efficient braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
See More

Wagner – Brake Caliper Bolt/Pin (Part No.H5004)

Brake Caliper Bolt/Pin

from

$22.19
An axle disc hardware kit with pins (upper/lower or inner/outer) that the caliper slides on. Replace old corroded pins and bolts which can hamper caliper movement and cause unnecessary and uneven pad wear.
See More

Carquest Wearever – Brake Hold-Down Spring (Part No.1150-2)

Brake Hold-Down Spring

from

$5.99
The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down springs are designed to secure the brake shoes to the backing plate while allowing proper brake shoe movement.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Maintains safe movement and effective stopping performance
See More

Bosch – QuietCast Premium Brake Pads w/ Shims (Part No.N1010441061BOS)

QuietCast Premium Brake Pads w/ Shims

from

$48.28
Bosch QuietCast Premium raises aftermarket brake pad technology to a whole new level. Employing the industry’s best pre-attached, rubber core shims and Molded Shim Technology (on selected applications), QuietCast delivers the quiet operation you and your customers expect with the durability and long life that are the hallmarks of all Bosch products. Every Bosch QuietCast Disc Brake Pad is fitted with the industry’s best pre-attached rubber core shim. This shim style is the most predominant type used by OE manufacturers and is exclusively offered by Bosch for the independent aftermarket.

Product Features:
  • OE-Equivalent and Direct Fit application.
  • OE style rubber-core shims
  • Advanced, platform-specific Semi Metallic formulation
  • Dedicated engineers source and rigorously test all friction materials and formulations
  • Manufactured under the same exacting quality standards as OE components and system
  • Powder-coated backing plate
  • Rigorous physical and dynamometer testing
  • Synthetic lubricant in box
  • Pads individually wrapped Bosch Molded Shim Technology (MST)*** (On Select Applications)
  • At the time of pressing, heat, adhesive and pressure mold the multi-layer shim to the backing plate and friction material creating an integrally molded unit.
  • Shim stays attached throughout the life of the pad; won’t walk or slide on the backing plate
  • Provides maximum stability resulting in quieter shim performance over the life of the pad
See More

Carquest Premium Gold – Brake Pads Without Hardware, Ceramic, Long Pad Life, Quiet Braking (Part No.GNAD154)

Brake Pads Without Hardware, Ceramic, Long Pad Life, Quiet Braking

from

$41.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific friction formulations provide shorter stopping distances and extended pad life
  • Hardware included for most applications, provides better value and
  • OE-designed slots and chamfers to reduce noise and vibration
  • Multi-layer shim provides near silent braking
  • Powder-coated backing plate prevents corrosion
See More

Carquest Wearever – Brake Shoes (Part No.S242)

Brake Shoes

from

$30.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime.  Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design. 
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Wagner – ThermoQuiet OE Semi-Metallic Disc Pad Set (Part No.N1010932454WAG)

ThermoQuiet OE Semi-Metallic Disc Pad Set

from

$46.81
THE “ONE-PIECE” BRAKE PAD THAT PROVIDES QUIETER BRAKING. Wagner® ThermoQuiet® brake pads are the quieter, “one-piece” brake pads. They feature Integrally Molded Sound Insulator (IMI) that integrates the friction material, backing plate and insulator into a single high strength component. The application-specific design spreads out heat, sound and vibration over a much larger surface area for quieter operation. A unique application-specific laser-shaped friction optimizes pad-to-rotor interface for better braking performance. The proprietary Wagner® OE21 formulations feature a complex matrix of materials that replicate the functions of copper while setting new benchmarks and providing across-the-board improvements in NVH control, stopping power, durability and dusting characteristics.

Product Features:
  • Quieter performance
  • Superior stopping power
  • Longer pad life
  • Comprehensive coverage for foreign and domestic nameplates
  • Install Wagner Brake products with total confidence
See More

ACDelco – Advantage Ceramic Brake Pads (Part No.N1010592524ACD)

Advantage Ceramic Brake Pads

from

$44.19
ACDelco Advantage Ceramic Brake Pads offer outstanding performance and are generally quieter and more durable than competitive ceramic pads. ACDelco Advantage Brakes feature the fit, form and function of premium aftermarket brakes at a more economical price. They offer dependability, performance and great value without sacrificing important features and benefits. The ACDelco name means the quality is assured – from brake pads and shoes to drums and rotors, you can count on the Advantage series to deliver value every time. Tested to SAE2430/SAE2784 standards, they offer dependability, performance and great value – without sacrificing important features and benefits.

Product Features:
  • Chamfered, slotted and shimmed to provide similar fit, form and function of the OE service part.
  • Hardware clip kits included (where applicable).
  • Produce less dust than semi-metallic brake pads for quiet operation
  • Manufactured using ceramic and nonferrous materials for durability
  • Tested to SAE2430 SAE2784 standards to help assure quality
See More

1975 Oldsmobile Cutlass Salon Brake Parts

You count on your 1975 Oldsmobile Cutlass Salon to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 34 Brake Parts ranging in price from $2.49 to $126.99, you’re sure to find everything you need for your 1975 Oldsmobile Cutlass Salon.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 9 different brands like Carquest, Carquest Premium, and Cardone. 1975 Oldsmobile Cutlass Salon Brake Parts start as low as $2.49!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 702 extensive product reviews on 1975 Oldsmobile Cutlass Salon Brake Parts. Some of the top-rated Brake Parts products we carry are Remanufactured Brake Master Cylinder with 4.3 stars and Brake Hose Assembly: Copper Washers Included with 4.9 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1975 Oldsmobile Cutlass Salon below to get started!

Top-Rated Brake Parts Brands For Your 1975 Oldsmobile Cutlass Salon

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1975 Oldsmobile Cutlass Salon running right for years to come. In our inventory you’ll find brands like Carquest, Carquest Premium, Cardone, and even more.

Popular Carquest Professional Platinum Brake Parts

You’ll find popular Carquest Professional Platinum brand products across Brake Pads and Shoes. All are waiting to get your 1975 Oldsmobile Cutlass Salon back on the road. Some of the top-rated Carquest Professional Platinum products in these categories are:

Top-Rated Carquest Wearever Brake Parts


If Carquest Wearever are what you’re looking for, our inventory holds plenty. We stock Carquest Wearever brand Brake Parts for your 1975 Oldsmobile Cutlass Salon, and some of our most reviewed Carquest Wearever parts include:
Brake Pads : Front, Reliable and Dependable Stopping
from $34.99
(54)
Brake Pads : Front, Reliable and Dependable Stopping
Rear Brake Pads and Shoes
Brake Shoes
from $30.99
(26)
Brake Shoes
Front Brake Pads and Shoes
Brake Drum - Rear
from $56.99
(20)
Brake Drum – Rear
Rear Brake Drums

FAQs for 1975 Oldsmobile Cutlass Salon Brake Parts

What are the most purchased Brake Parts for the 1975 Oldsmobile Cutlass Salon?

Out of 34 Brake Parts for the 1975 Oldsmobile Cutlass Salon, the most popular in our inventory are:
Brake Pads With Hardware, Ceramic, Long Pad Life, Quiet Braking
from $62.99
(17)
Brake Pads With Hardware, Ceramic, Long Pad Life, Quiet Braking
Rear Brake Pads and Shoes
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders

What are the top-rated 1975 Oldsmobile Cutlass Salon Brake Parts?

Top-rated Brake Parts for your 1975 Oldsmobile Cutlass Salon based on customer reviews/ratings are:
Remanufactured Brake Master Cylinder
from $48.49
(23)
Remanufactured Brake Master Cylinder
“They had the best price around.”
Brake Hose Assembly: Copper Washers Included
from $25.99
(8)
Brake Hose Assembly: Copper Washers Included
“fit well”
Brake Rotor
from $82.99
(7)
Brake Rotor
“Great fit on my classic camaro”