1975 Mercury Cougar Performance and Racing Products

Name: Rear Main Seal Gasket
Brand: Mr. Gasket
SKU: 1963
Price: 48.99 USD

Below you will find various in-demand Mercury Performance and Racing Products, components and accessories for your 1975 Cougar. Advance Auto Parts has popular Cougar parts like Performance Exhaust Products, Performance Ignition Products, Performance Steering Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Cougar model years including 1993, 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002 and more. Select a category of 1975 Mercury Cougar Performance and Racing Products below and start saving instantly.

Popular 1975 Mercury Cougar Performance and Racing Products Categories

Performance Carburetors

Performance Engine Coolant Thermostats

Performance Starters

Performance Intake Manifolds

Performance Fuel Pumps

Performance Coils

Performance Distributor Cap and Rotor Kits

Performance Shifters

Performance Distributors

Performance Valve Covers

Performance Engine Water Pumps

Performance Water Outlets

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Front Shock and Struts

Performance Distributor Components

Performance Engine Intake Manifold Gaskets

Performance Engine Timing Sets and Components

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Engine Oil Pan Gaskets

Performance Ring and Pinions

Performance Ignition Parts

Performance Engine Valve Lifters

Performance Engine Main Bearing Gasket Sets

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Engine Cylinder Head Bolts

Performance Strut Rods and Kits

Performance Engine Push Rod Guideplates

Performance Clutch Pivot Balls

Performance Engine Push Rods

Performance Engine Valve Spring Retainer

Performance Torque Converters

Performance Engine Cylinder Heads

Performance Ignition Systems

Performance Engine Valve Stem Seal Sets

Performance Engine Rebuild Kits

Essential Performance and Racing Products for 1975 Mercury Cougars

from

$48.99

This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It also provides for an upgrade for that leaky rope style seal and is a direct replacement for a rubber main seal. It’s also injection molded for a precise fit.

Product Features:

Repairs That Leaky Rear Main Sail
Silicone Rubber to Withstand Extreme Engine Oil Temperatures
Upgrade for Rope Seal Equipped Cars or Direct Replacement for Rubber Main Seal
Injection Molded for Precise Fit

from

$426.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$54.99

The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:

Indicates coolant temperature
Helps prevent coolant injuries
Fahrenheit and centigrade readings
Color-coded temperature ranges
Integrated coolant reclamation valve
Improves under-hood appearance
Chromed crown with a colored trim ring

from

$33.99

Multi-Layered Steel (MLS) exhaust gaskets are designed for extreme cylinder pressures produced by high horsepower high compression turbo-charged, supercharged and nitrous oxide injected engines. Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal extreme exhaust pressures. Total gasket thickness .075 inch. Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.

Product Features:

Designed for extreme cylinder pressures by high horsepower-high compression turbocharged, supercharged and nitrous oxide injected engines
Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention
Stress formed inner and outer layer embossments act like springs that rebound under flange clamp load, creating force to seal extreme pressures
Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials
Total gasket thickness .075 inch

from

$267.99

HYDRAULIC – Magnum: Performance use. Best with mild converter, headers, 9:1 compression and lower gears. Rough idle.

Product Features:

HYDRAULIC – Magnum: Performance use. Best with mild converter, headers, 9:1 compression and lower gears. Rough idle.
270/270 Advertised Duration, 224/224 Duration @ .050″, .500″/.500″ Lift, 110 Lobe Separation
Valve spring upgrade required
289-302 Firing Order

from

$34.99

Precision die-cast, these water necks are first polished to a high luster, then chrome plated. Comes with gasket and mounting bolts.

Product Features:

Complete with gasket and mounting bolts
Chrome plated

from

$30.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$722.99

Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.

Product Features:

Certified Billet Material
Borg and Beck Clutch Pattern
Long-Style Clutch Pattern
Ring Gear Securely Mounted To Prevent Spinning

from

$402.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Stock Replacement
50-State Street Legal

from

$230.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:

Work with stock guides and 11/32″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$33.99

It’s easy to overlook the small details. For engine builders focused on the larger components like camshafts, cylinder heads and pistons, small parts are often forgotten until the final stages of engine assembly. COMP Cams Engine Finishing Kits include those often missing parts like woodruff keys, cylinder head alignment dowels, cam bolts, cam eccentrics and timing cover and oil pump dowel pins that are so crucial to properly assembling your engine.

Product Features:

Includes parts such as woodruff keys, cylinder head alignment dowels, cam bolts, cam eccentrics, timing cover and oil pump dowel pins
Available for various engine applications

from

$30.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$141.99

Product Features:

Use W/ Valve Springs Part #5722, 5796
Set of 16
1.50 in. Outside Diameter
Steel Material
Black Oxide Finish

from

$107.99

Product Features:

Highest Quality Head Bolts
Cold-Formed/Heat Treated
Ensures Molecular Integrity
Reduced Diameter Bolt Heads
Hardened/Parallel-Ground Washers Included
Rated At 170000 psi
Manufactured By ARP

from

$399.99

The Hurst Competition Plus installation kits are designed so that your shifter fits directly into your muscle car, with the least possible modifications to the vehicle. Includes arms, rods, mounting plate, bushings, and all necessary hardware.

Product Features:

Gear Shift Installation Kit
Includes Hardware
Durable
Sold as a Kit
Hurst Quality

from

$344.99

RngPnn

from

$620.99

MSD is excited to offer two Ready-to-Run distributors for two classic Ford engines! These distributors are the answer to weak breaker points or rebuilt aftermarket models. Inside the billet housing there is a high-output ignition module. When the maintenance-free magnetic pick-up signals the module to fire, up to 7.5 A is sent to the coil where a powerful spark is created. This improved spark output results in quick starts, snappy throttle response and terrific drivability. The distributors are equipped with a vacuum advance canister for cruising economy. Plus, there is a mechanical advance assembly that is mounted on top of the distributor shaft making it easy to adjust the advance to meet your needs. Another great feature of the Ready-to-Run distributors is their simple installation! All you need to do is connect three wires and you’ll be cruising!

Product Features:

Simple and clean three wire installation
CARB E.O. Approved
Does not require an MSD Ignition Control
Supplied w/small dia. cap w/HEI style terminals; race and rotor
Will accept PN[8441] Cap-A-Dapt
Nylon pads ensure smooth operation of the advance weights
Advance weight pins are staked and tig welded to the plate
Mech. advance assem. can be locked out for crank trigger systems

from

$186.99

Product Features:

Mechanical Operation
Fuel Sending Unit Not Included
For Small-Block 289-351 Ford Engines
In Tank Mounting Type
110 GPH

from

$324.99

Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:

Maximum Cooling for Street and Racing Engines
Internal Passages Are Balanced for Maximum Flow
Impeller is Larger than Others For Max Pressure
Impeller Vanes Dramatically Increase Flow Rates
Equal Distribution to Both Sides of Block
Only Flows in One-Direction for Optimum Efficiency

from

$15.99

Competition design uses a stud, washer & nut to secure the clamp rather than a bolt. The clamp itself is also chromed. Fits 1962-2001 Small Block Ford V8s, including both Windsor and Cleveland as well as Ford 385 series 429/460 big blocks including Boss models.

Product Features:

Eliminates bolt in favor of stud mount design
Chrome plated
Ideal For Ignition Distributor

from

$46.99

Product Features:

Solid Bushing Chain Resists Stretching
For Use with Stock or Edelbrock Camshafts
Stressproof Steel Crank Gears
3 Keyway Setting Points To Ensure Accurate Timing
True Bearing Surface Rolls with the Sprockets
50 State Street Legal
For Engine w/ 2-piece Fuel Pump Eccentric or EFI

from

$257.99

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.

Product Features:

Seat pressure: 115 lbs. @ 1.700″, Open Pressure: 284 lbs. @ 1.200″
O.D.: 1.437″, I.D.: 1.039″
Single valve springs with damper
Approximately .510″ max lift at recommended installed height

from

$52.99

Designed to allow additional adjustment of the clutch fork height to eliminate clutch release problems when installing a high performance clutch. Recommended for use with Lakewood safety bell housings. Available for most GM, Ford, and Mopar applications. Adjustable dowel pins correct for improper register bore alignment of bell housing.

Product Features:

Allows Additional Adjustment
Eliminates Clutch Release Problems

from

$649.99

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:

Absolutely The Most Accurate Way To Trigger The Ignition
The non-magnetic pickup cannot be false triggered.
Powerful magnets are embedded in a billet aluminum trigger wheel.
Incl. brackets/mounting hardware to fit a variety of engines

from

$92.99

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$59.99

ACCEL cap and rotor kits offer superior protection from “arc-thru” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.

Product Features:

See catalog for application information
Offers Superior Protection From Arc-Thru and Crossfire

from

$108.99

Product Features:

Heavy Duty Cap and Rotor Kit
With Brass Inserts

Upgrade your 1975 Mercury Cougar with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1975 Mercury Cougar, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Performance and Racing Products are key to keeping your Cougar functioning at its best. At Advance Auto Parts, we offer a wide selection of 344 Performance and Racing Products for the 1975 Mercury Cougar, designed to meet your needs without breaking the bank. From Performance Exhaust Product replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1975 Mercury Cougar at great prices. Our Performance and Racing Products inventory for this model ranges from just $7.99 to $1,881.00, with an average price of $250.51. Our 344 Performance and Racing Products in stock come from 16 trusted brands, so you’re sure to find the right part for your 1975 Mercury Cougar without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1975 Mercury Cougar, we stock popular OEM and aftermarket Performance and Racing Products from top names like FEL-PRO Performance, Competition Cams, B & M, and more. FEL-PRO Performance Performance and Racing Products start at just $28.99 and boast an impressive 4.2 stars average rating from customers. Competition Cams and B & M also bring quality to the table, with Performance and Racing Products available starting at $33.99, and at an average 4.1 stars rating. With 397 customer reviews and counting, our 1975 Mercury Cougar Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1975 Mercury Cougar is always ready to roll. We’re committed to providing you with everything you need to keep your Cougar in top shape, all in one place. Start shopping confidently below for your 1975 Mercury Cougar!

Best-Selling Performance Exhaust Products for 1975 Mercury Cougars

Enhance the driving experience in your Mercury with 6 quality Performance Exhaust Product components, starting at $28.99.

show more show less

from

$33.99

Manufactured from high-temperature composite exhaust material. Provides maximum torque retention to eliminate gasket failure. Can be trimmed if necessary for modified port applications. Precision die cut for an excellent fit. For OE replacement, high-performance street, drag race and oval track.

Product Features:

High-Temperature Exhaust Material
Withstands Extreme Exhaust Heat
Excellent Sealing Durability And Torque Retention
Superior Tensile Strength

from

$28.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$45.99

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$59.99

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Manufactured from high-temperature steel core/graphite faced exhaust material
Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
Conforms to and seals minor surface irregularities
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
For use with SVO square port cylinder heads
Easy Removal For Disassembly

from

$45.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$29.99

Product Features:

Designed To Match Port Openings Of Cylinder Heads
Excellent Free-Flowing Seal

Most Popular 1975 Mercury Cougar Performance Ignition Products

Customize your Mercury with 7 Performance Ignition Products products like Performance Coils, Performance Ignition Parts, and Performance Ignition Systems, all priced under $649.99.

show more show less

from

$92.99

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$45.99

Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Product Features:

42000 Volts
Effective To 6500 RPM
Quicker Starting
Improved Throttle Response
Higher RPM Power
Can Finished In Yellow

from

$114.99

Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:

Oil Filled For Better Cooling
Optimized Low Resistance
Silicon Magnetic Steel E-Core
Higher Energy/Voltage Outputs
Quicker Starts
Improved Idle Quality
Resists Shock And Vibration
Resists Corrosion

from

$33.99

Product Features:

Service Part
Makes Connections Quick And Easy

from

$649.99

Absolutely The Most Accurate Way To Trigger The Ignition
The non-magnetic pickup cannot be false triggered.
Powerful magnets are embedded in a billet aluminum trigger wheel.
Incl. brackets/mounting hardware to fit a variety of engines

from

$599.99

Absolutely the most accurate way to trigger the ignition
The non-magnetic pickup cannot be false triggered.
Powerful magnets are embedded in a billet aluminum trigger wheel.
Incl. brackets/mounting hardware to fit a variety of engines

from

$199.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

Top Picks for 1975 Mercury Cougar Performance Steering Products

Upgrade Mercury Cougars with top-quality Performance Steering Products parts, including 2 OEM and aftermarket selections for your 1975 model.

show more show less

from

$9.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$9.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

In-Demand Performance Fuel Systems for 1975 Mercury Cougars

Select from 11 premium Performance Fuel Systems parts for your 1975 Mercury Cougar, with prices ranging from $18.99 to $699.99.

show more show less

from

$499.99

Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,

Product Features:

Vibratory Polished For Good Looks

from

$186.99

Product Features:

Mechanical Operation
Fuel Sending Unit Not Included
For Small-Block 289-351 Ford Engines
In Tank Mounting Type
110 GPH

from

$682.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$414.99

Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.

from

$136.99

Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:

Street Performance
Flows 80 gph Free Flow
Shutoff Pressure Pre-Set 7.5 PSI
Fuel Pressure Regulator Is Not Required
Heavy Duty Construction For Continuous High rpm Operation
Fuel Body Casting Can Be Rotated For Various Plumbing Situations
Inlet And Outlet Tapped For 1/4 in. NPT
Inlet/Outlet Tapped For .25 in. NPT

from

$18.99

Block-off plates are precision cut to cover stock fuel pump openings. Gasket included.

Product Features:

Chrome Plated Steel
Gasket Included
Easy Installation

from

$249.99

High Output Fuel Flow
Flows 130 gph Free Flow
Shutoff Pressure Pre-Set From 7.5 To 9 PSI
Fuel Pressure Regulator Required
Heavy Duty Construction For Continuous High rpm Operation
Fuel Body Casting Can Be Rotated For Plumbing Situations
Redesigned High Flow Valves Ensure Adequate Fuel Delivery
Inlet And Outlet Tapped For 3/8 in. NPT

from

$230.99

High Output Fuel Flow
Flows 130+ gph Free Flow
Shutoff Pressure Pre-Set From 7.5 To 9 PSI
Fuel Pressure Regulator Is Not Required
Heavy Duty Construction For Continuous High rpm Operation
Redesigned High Flow Valves Always Ensure Adequate Fuel Delivery
Fuel Body Casting Can Be Rotated For Plumbing Situations
Inlet And Outlet Tapped For 3/8 in. NPT

from

$699.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$699.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet-Flow Tested To Assure It Arrives Ready To Run
Street Ready; Out Of The Box

from

$407.99

Product Features:

Satin Finish
4 Barrel
Annular Booster Type
Manual Choke Type
750 cfm Maximum Flow Rating

Most Sold 1975 Mercury Cougar Performance Engines

Explore our best-selling Mercury parts for the 1975 Cougar among 275 OEM and aftermarket options starting from $7.99.

show more show less

from

$35.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$50.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Rigid core, molded silicone rubber gaskets provide for ease of installation, and are great for on-again/off-again situations (like setting valve lash).
Features high-tech silicone material for long life, a solid steel core for strength and durability, and stainless steel compression limiters to prevent
Not intended for use in emission controlled vehicles.

from

$30.99

Product Features:

Clean Positive Seal
Embossed Silicone Bead Surrounding The Port
Matched To Manifolds And Cylinder Heads

from

$49.99

Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals.

Product Features:

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Silicone beading on both sides of each gasket
Complete with manifold end seals
For OE replacement, high performance street, drag race and oval track use
Creates Tight Leak proof Seal

from

$350.99

These Magnum Roller Rocker Arms for Ford V8 289-351W (Rail Type) 1968-89 applications are the ultimate street rocker. With a 3/8″ stud diameter and 1.6 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed from 8620 chromemoly steel, which is a superior material that will not flex and assures maximum lift. Their roller tip reduces friction, while stiff design and superior ratio accuracy yield more effective valve lift. With a 15 to 30 horsepower increase over other rocker arms, Magnum Roller Rockers are perfect for performance applications with less than 350 lbs. open spring pressure. Don’t accept inferior products or cheap knock-offs, look for the COMP Cams logo stamped into the underside of every Magnum Rocker.

Product Features:

Ultimate street rocker designed for serious performance enthusiasts
Constructed from 8620 chromemoly steel, a superior material that will not flex and assures maximum lift
Roller tip reduces friction while stiff design and superior ratio accuracy yields more effective valve lift
15 to 30 horsepower increase over stock rocker arms
Use in any applications with less than 350 lbs. open spring pressure

from

$33.99

Work with .530″ guides and 3/8″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$297.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$52.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$41.99

Ultra-Seal is Mr. Gasket premium valve cover gasket material. It’s manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularites and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For original equipment replacement, high performance street, drag race and oval track use. Sold as a pair. These gaskets are .187 inch thick.

Product Features:

Manufactured from high-density cork /rubber blend gasket material
A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
For OE replacement, high performance street, drag race and oval track
.187″ thick
Handles Ex Flange Pressure
Forms Leak Proof Seal
Black Latex Coating

from

$29.99

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 180 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$29.49

Opens at 160 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully opens at Correct Temperature Consistently Regardless of engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$257.99

Seat pressure: 115 lbs. @ 1.700″, Open Pressure: 284 lbs. @ 1.200″
O.D.: 1.437″, I.D.: 1.039″
Single valve springs with damper
Approximately .510″ max lift at recommended installed height

from

$33.99

Includes parts such as woodruff keys, cylinder head alignment dowels, cam bolts, cam eccentrics, timing cover and oil pump dowel pins
Available for various engine applications

from

$377.99

New Everbright(TM) Manifold coating now available on the most popular Weiand and Holley intakes uses proprietary vacuum metalizing technology combined with a protective clear powdercoat to provide long lasting, virtually maintenance free polished looks.

Product Features:

Low Rise/Dual Plane Design For Maximum Torque
Permanent Mold Casting Process
Lighter/Smoother/Better Looking/Consistent Casting
Dyno Proven To Make 25hp Over Competition
Fully CNC Machined For A Perfect Fit
Square Bore Carburetor Flange
Exhaust Crossover For Improved Street Drivability

from

$107.99

Product Features:

Highest Quality Head Bolts
Cold-Formed/Heat Treated
Ensures Molecular Integrity
Reduced Diameter Bolt Heads
Hardened/Parallel-Ground Washers Included
Rated At 170000 psi
Manufactured By ARP

from

$249.99

The COMP Cams High Energy Die-Cast Aluminum Roller Rocker Arms are new rocker arms from the valve train leader that have been designed for street and moderate race use. They feature a die-cast body created from aluminum with a needle bearing fulcrum and roller tip. The die-cast, larger than stock body offers the strength properties and light weight of aluminum while the specially engineered fulcrum and roller tip decrease friction and lower oil temperatures, thus improving response and horsepower.

Product Features:

Cost effective aluminum construction provides superior strength to weight ratio
Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
Durable design increases valve lift while withstanding the rigors of moderate race use
Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.

from

$31.99

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$38.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$34.99

Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Manufactured from high-density cork/rubber blend gasket material
Provides excellent sealing and durability
For OE replacement, high performance street, drag race and oval track use

from

$30.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$27.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$39.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
1970-82; w/2 Bbl. Cylinder heads
Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
Not intended for use in emission controlled vehicles.

from

$48.99

Repairs That Leaky Rear Main Sail
Silicone Rubber to Withstand Extreme Engine Oil Temperatures
Upgrade for Rope Seal Equipped Cars or Direct Replacement for Rubber Main Seal
Injection Molded for Precise Fit

from

$34.99

Precision die-cast, these water necks are first polished to a high luster, then chrome plated. Comes with gasket and mounting bolts.

Product Features:

Complete with gasket and mounting bolts
Chrome plated

Top-Rated Performance and Racing Products Brands For Your 1975 Mercury Cougar

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1975 Mercury Cougars. Below you’ll find some of our best rated Performance and Racing Products from FEL-PRO Performance, Competition Cams, and B & M, and more. Performance and Racing Products from these brands that fit a 1975 Cougar start at just $28.99 and are rated as high as 4.2 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular FEL-PRO Performance 1975 Mercury Cougar Performance and Racing Products

When it comes to maintaining or upgrading your 1975 Mercury Cougar, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. FEL-PRO Performance ticks all of those boxes. We offer a wide selection of FEL-PRO Performance Performance and Racing Products, specifically designed for the 1975 Mercury Cougar. With over 3 FEL-PRO Performance brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $28.99, with an average price of just $38.66. Plus, with over 6 customer reviews and an average rating of 4.2 stars, you can trust that our FEL-PRO Performance Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $28.99

(1)

Exhaust Manifold Gasket Set

“Works good no leaks on headers”

from $50.99

(1)

Engine Valve Cover Gasket Set

“good”

from $35.99

(4)

Lower Intake Manifold Gasket Set: 11 Piece Set

“Great overall intake gasket!!”

Popular Competition Cams 1975 Mercury Cougar Performance and Racing Products

Competition Cams auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1975 Mercury Cougar owner should feel confident when installing genuine Competition Cams parts in their vehicle. To ensure the best fit and performance for your 1975 Cougar, Advance Auto Parts carries a full inventory of 3 Competition Cams Performance and Racing Products. Plus you will be keeping your Mercury in peak condition while saving money because prices on these Competition Cams Performance and Racing Products range from $33.99 to $350.99, plus, with more than 3 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $350.99

(1)

Magnum Roller 1.6 Ratio Rocker Arm Set

“Just what I needed.”

from $297.99

(1)

Magnum 253/253 Hydraulic Flat Cam

“Good service. Great people working there.”

from $33.99

(1)

VALVE SEALS, TEFLON 3/8" 1 ST

“As good as OEM.”

FAQs for 1975 Mercury Cougar Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1975 Mercury Cougars?

Out of 344 Performance and Racing Products that fit 1975 Mercury Cougars, the following parts are the top sellers:

High Performance 180 Degree Thermostat for Increased Flow (17360033) – $29.99
High Performance Thermostat – 160 Degree Brass & Copper (17360031) – $29.49
Lower Intake Manifold Gasket Set: 11 Piece Set (5991277) – $35.99

What’s the price range for 1975 Mercury Cougar Performance and Racing Products?

Performance and Racing Product prices for the 1975 Mercury Cougar start at $7.99 and go up to $1,881.00 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1975 Mercury Cougar?

The average price for Performance and Racing Products for the 1975 Mercury Cougar is $250.51. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Mercury Cougar model years?

Yes, we currently carry Performance and Racing Products for 33 model years of Mercury Cougars between 1967 and 2002. Performance and Racing Products are bought most frequently for the following model years: 2002, 2001, 2000, 1999, 1997, 1996, 1995, 1994, and 1993.

What are the cheapest Performance and Racing Products for my 1975 Mercury Cougar?

The cheapest 1975 Mercury Cougar Performance and Racing Products we carry in stock are:

High Energy 9.621" Long, 3/8" Diameter Pushrod (50289304) – $7.99
High Energy 8.152" Long, 5/16" Diameter Pushrod (50289279) – $7.99
High Energy 9.440" Long, 5/16" Diameter Pushrod (50289314) – $7.99
High Energy 8.096" Long, 5/16" Diameter Pushrod (50289292) – $7.99
High Energy 9.500" Long, 5/16" Diameter Pushrod (50289671) – $7.99

What are the top-rated Performance and Racing Products that fit the 1975 Mercury Cougar?

Out of 397 reviews by customers, our 1975 Mercury Cougar Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1975 Mercury Cougar and their top-rated products:

Performance Ignition Products
- Unilite Ignition Module (17350025) – $92.99
- Super Stock Replacement Coil for Improved Performance, Starting, and Power (5024269) – $45.99
Performance Exhaust Products
- Unilite Ignition Module (17350025) – $92.99
- Super Stock Replacement Coil for Improved Performance, Starting, and Power (5024269) – $45.99
Performance Steering Products
- Unilite Ignition Module (17350025) – $92.99
- Super Stock Replacement Coil for Improved Performance, Starting, and Power (5024269) – $45.99

What types of Performance and Racing Products do you sell for my 1975 Mercury Cougar?

As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1975 Mercury Cougar:

Can I get help with 1975 Mercury Cougar Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Performance and Racing Products and more.

What is your return policy for Mercury Cougar Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Mercury Cougar Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1975 Mercury Cougar Performance and Racing Products

Mr. Gasket – Rear Main Seal Gasket (Part No.1963)

Competition Cams – Thumpr 226/241 Hydraulic Flat Cam and Lifter Kit (Part No.CL33-600-5)

Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)

Mr. Gasket – Mls Exhaust Gasket (Part No.4825G)

Competition Cams – Magnum 224/224 Hydraulic Flat Cam (Part No.31-414-3)

Mr. Gasket – Water Neck (Part No.2664)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1619)

Hays – Power Train (Part No.12-240)

Edelbrock – Performer 351-W Intake Manifold for S/B Ford 351 Windsor (Part No.2181)

Competition Cams – Set of 16 Umbrella Valve Seals for Stock Guide Size, 11/32" Valve Stem (Part No.502-16)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Competition Cams – FINISHING KIT, SMALL BLOCK FORD 1 EA (Part No.235)

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1811)

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9733)

Edelbrock – 289-302 Ford Head Bolt Kit (Part No.8552)

Hurst – Installation Kit, Competition Plus (Part No.3738615)

Richmond Gear – RngPnn (Part No.69-0179-1)

MSD Ignition – Distributor; Ford FE; Ready-to-Run (Part No.8595)

Edelbrock – Performer RPM Series fuel pump is for 289-351W Ford (Part No.1725)

Edelbrock – Water Pump for Small-Block Ford 351W in Satin Finish (Part No.8843)

Mr. Gasket – Chrome Distributor Hold-Down Clamp (Part No.2502)

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7814)

Competition Cams – VALVE SPRINGS, 1.437" SINGLE 1 ST (Part No.942-16)

Lakewood – Clutch Fork Pivot Ball-Adj:GM (Part No.15501)

MSD Ignition – Crank Trigger Kit; Small Block Ford (Part No.8640)

Mallory – Unilite Ignition Module (Part No.605)

Accel – High Performance Distributor Cap & Rotor Kit with Gray Finish (Part No.8234)

Accel – Distributor Cap And Rotor Kit (Part No.8230)

Mr. Gasket – Exhaust Gasket Set (Part No.253)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1430)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1467)

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5959)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1468)

Edelbrock – Exhaust Manifold Gasket Set for Ford (Part No.7228)

Mallory – Unilite Ignition Module (Part No.605)

Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)

Accel – Supercoil (Part No.140001)

Mallory – Distributor Wiring Harness (Part No.29349)

MSD Ignition – Crank Trigger Kit; Small Block Ford (Part No.8640)

MSD Ignition – Crank Trigger Kit; Big Block Ford (Part No.8644)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)

Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)

Edelbrock – Performer RPM Series fuel pump is for 289-351W Ford (Part No.1725)

Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)

Edelbrock – Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.9906)

Holley – Mechanical Fuel Pump (Part No.12-833)

Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1517)

Holley – Mechanical Fuel Pump (Part No.12-460-13)

Holley – Mechanical Fuel Pump (Part No.12-289-13)

Holley – Prem Street Carbs (Avengers) (Part No.0-80870)

Holley – Prem Street Carbs (Avengers) (Part No.0-80570)

Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 11 Piece Set (Part No.1250)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1684)

Edelbrock – Intake Manifold Gasket for 302 E-Boss & 351W E-Boss Clevor Conversions (Part No.7265)

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5838)

Competition Cams – Magnum Roller 1.6 Ratio Rocker Arm Set (Part No.1431-16)

Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)

Competition Cams – Magnum 253/253 Hydraulic Flat Cam (Part No.35-331-4)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1011-1)

Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5870)

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)

Competition Cams – VALVE SPRINGS, 1.437" SINGLE 1 ST (Part No.942-16)

Competition Cams – FINISHING KIT, SMALL BLOCK FORD 1 EA (Part No.235)

Weiand – Action +Plus; Intake Manifold (Part No.8010)

Edelbrock – 289-302 Ford Head Bolt Kit (Part No.8552)

Competition Cams – ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST (Part No.17043-16)

Mr. Gasket – High Performance Thermostat (Part No.4365)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1230)

Mr. Gasket – Valve Cover Gasket Set (Part No.276)

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1811)

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1812)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 7 Piece Set (Part No.1240)

Mr. Gasket – Rear Main Seal Gasket (Part No.1963)

Mr. Gasket – Water Neck (Part No.2664)