1975 GMC C35 Clutch Systems
More 1975 GMC C35 Clutch Systems Categories
If you’re looking for an original Clutch Systems replacement for a 1975 GMC C35, you can search through our selection below. You’ll also find aftermarket and OEM Clutch Systems to meet your needs.
Essential 1975 GMC C35 Clutch Systems
Dorman – Help – Ball Stud Thread Size 13/16-16, Length 1.50 In. (Part No.14556)
from
$20.99
This clutch pivot ball is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pivot ball is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this pivot ball is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ATP – ATP Flywheel Shim (Part No.GS-8)
from
$27.99
ATP Flywheel Shim
ATP – FLYWHEEL SHIM (Part No.GS-10)
from
$26.99
FLYWHEEL SHIM
Lakewood – Trans Adapter-Chevrolet (Part No.77-150)
from
$689.99
Trans Adapter-Chevrolet
ATP – AT CLUTCH PLATE (Part No.JC-57)
from
$12.99
AT CLUTCH PLATE
ATP – AT CLUTCH PLATE (Part No.SC-29)
from
$13.99
AT CLUTCH PLATE
LuK – Clutch Kit (Part No.04-064)
from
$139.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
See More
LuK – Clutch Kit: 11 7/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (Part No.04-902)
from
$164.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Dorman – Clutch Pilot Bushing .593 In. x 1.09 In. Type A, Length .750 In. (sold by each) (Part No.690-014)
from
$5.99
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Bearings (Part No.PB-656-HD)
from
$14.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel and bronze for outstanding durability and performance
- Oil impregnated for extended life
- Industry leading coverage
- Professional technicians know they can depend on National
ARP Auto Racing – For Use With 265/ 502 Chevy V8, 3/8"-16 Thread, 200000Psi Tensile, Hex Head (Part No.230-2202)
from
$34.99
The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.
Product Features:
See More
Product Features:
- High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 Psi
- Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
- Large Diameter, Low Profile Design
- Complete With Washers
- 200,000 PSI
- 1″ Underhead Length
- 3/8″-16 Thread Size
Dorman – Help – Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In (Part No.74070)
from
$12.99
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ARP Auto Racing – ARP Flywheel Bolt Kit (Part No.100-2801)
from
$12.99
ARP offers two styles of Flywheel bolts: premium grade Pro Series, with a 200,000 psi rating and High Performance, with a 180,000 psi rating. They are both heat-treated prior to thread rolling and machining, feature an exclusive, flat, 12-point head design and larger than stock shank diameter for increased strength and improved flywheel register. Kits include washers and nuts where applicable.
Product Features:
See More
Product Features:
- 7/16″-20 Thread Size(s)
- 8740 Chromoly
- Black Oxide
- Ford 289-460
- Chevy 90 Degree V6 & 265-454 With 2PC Rear Seal
- Set of 6
- 1″ Underhead Length
Lakewood – Power Train (Part No.RM-902)
from
$193.99
Power Train
ATP – M/T FLYWHEEL (Part No.Z-295)
from
$206.99
M/T FLYWHEEL
ATP – ATP Automatic Transmission Flex Plate (Part No.Z-111)
from
$35.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – Flywheel Ring Gear (Part No.ZA-500)
from
$29.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
Lakewood – Replacement Clutch Fork-GM (Part No.15500)
from
$80.29
Replacement Clutch Fork-GM
LuK – Clutch Release Fork (Part No.LF9801)
ATP – CLUTCH FORK (Part No.ZA-100)
from
$23.99
CLUTCH FORK
National – Multi Purpose Bearing (Part No.614037)
from
$58.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
Hays – Power Train (Part No.70-101)
from
$90.99
Power Train
Driveworks – Clutch Release Bearing (Part No.S-614018)
National – Multi Purpose Bearing (Part No.614018)
from
$44.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Clutch Pilot Bearing/ Bushing (Part No.690-057)
from
$28.49
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Clutch Pilot Bearing/ Bushing (Part No.690-057.1)
from
$28.99
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1975 GMC C35 Clutch Systems Categories
1975 GMC C35 Clutch Systems
You count on your 1975 GMC C35 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 51 Clutch Systems ranging in price from $3.99 to $907.99, you’re sure to find everything you need for your 1975 GMC C35.
Brands matter. If you want to shop a specific Clutch Systems brand, we stock 8 different brands like ATP, Dorman, and LuK. 1975 GMC C35 Clutch Systems start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Clutch Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 161 extensive product reviews on 1975 GMC C35 Clutch Systems. Some of the top-rated Clutch Systems products we carry are Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In with 3.0 stars and Clutch Fork, Clutch-In with 3.0 stars.
Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 1975 GMC C35 below to get started!
Top-Rated Clutch Systems Brands For Your 1975 GMC C35
Trusted Clutch Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1975 GMC C35 running right for years to come. In our inventory you’ll find brands like ATP, Dorman, LuK, and even more.
Popular ATP Clutch Systems
You’ll find popular ATP brand products across Clutch Forks and Flywheels. All are waiting to get your 1975 GMC C35 back on the road. Some of the top-rated ATP products in these categories are:
Top-Rated National Clutch Systems
If National are what you’re looking for, our inventory holds plenty. We stock National brand Clutch Systems for your 1975 GMC C35, and some of our most reviewed National parts include:
FAQs for 1975 GMC C35 Clutch Systems
What are the most purchased Clutch Systems for the 1975 GMC C35?
Out of 51 Clutch Systems for the 1975 GMC C35, the most popular in our inventory are:
What are the top-rated 1975 GMC C35 Clutch Systems?
Top-rated Clutch Systems for your 1975 GMC C35 based on customer reviews/ratings are:
from
$12.99
(2)
Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In
“Right part”
from
$70.99
(2)
Clutch Fork, Clutch-In
“To my utter amazement, this piece is MADE IN USA!
Use Code RAF5A1102 to get 40% Off!”
from
$135.99
(1)
Power Train
“purchased this for my 1971 427 stroker Corvette,and one of the teeth chipped off the. engine was turned correctly so this should not have happened.”
