1975 Ford Elite Performance Distributors
More 1975 Ford Elite Performance Distributors
Find your specific 1975 Ford Elite original or aftermarket Performance Distributors below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1975 Ford Elite Performance Distributors
MSD Ignition – Distributor; Ford 351W; Vacuum Advance (Part No.8478)
from
$653.99
The street pro-billet distributors are the perfect choice for powerful engines that see plenty of street time. The street models share the same features as the small diameter models shown above, plus feature a vacuum advance. This canister provides improved economy and an accurate mechanical advance lets you dial-in an advance curve to match your driving needs. A magnetic pick-up produces accurate trigger signals that remain stable throughout the entire rpm range of your engine and is completely maintenance-free.
Product Features:
See More
Product Features:
- Billet housing 5/8 in. smaller dia. than stock Ford distributors
- CARB E.O. Approved
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- Mech. advance assem. can be locked out for crank trigger systems
- Advance weight pins are staked and tig welded to the plate
MSD Ignition – Distributor; Ford V8; 351W (Part No.8584)
from
$427.99
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.
Product Features:
See More
Product Features:
- CNC machined billet aluminum housing and DuPont Rynite base
- No CARB Exemption Order Number
- Supplied w/Cap-A-Dapt and rotor (accepts MSD socket style caps)
- Mech. advance assem. can be locked out for crank trigger systems
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
MSD Ignition – Distributor; Ford 351C-460; Vacuum Advance (Part No.8477)
from
$570.99
The street Pro-Billet distributors are the perfect choice for powerful engines that see plenty of street time. The street models share the same features as the small diameter models shown above, plus feature a vacuum advance. This canister provides improved economy and an accurate mechanical advance lets you dial-in an advance curve to match your driving needs. A magnetic pick-up produces accurate trigger signals that remain stable throughout the entire RPM range of your engine and is completely maintenance-free.
Product Features:
See More
Product Features:
- Billet housing 5/8 in. smaller dia. than stock Ford distributors
- CARB E.O. Approved
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- QPQ coated polished steel shaft; guided by sealed ball bearings
MSD Ignition – Distributor; Ford TFI; 351W; no Module; Hydraulic Roll (Part No.8451)
from
$580.99
When you start making serious power with your EFI Ford, the stock distributor shaft is one of the weak links of the engine. These Pro-Billet models answer the need for an affordable replacement in a strong and great looking package. Each distributor starts as a solid billet that is secured into a state of the art (CNC) machine where it is transformed into a precision housing.
Product Features:
See More
Product Features:
- Drop in billet replacement for late model Ford TFI 5.8L dist.
- Supplied w/steel gear to work w/factory roller camshafts
- Factory style ignition module connector accepts factory wiring
- CNC machined billet aluminum housing and billet aluminum base
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Supplied w/Late Model Distributor Cap And Rotor
- Legal to install in all 50 states
Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3755401)
from
$538.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
MSD Ignition – Distributor; Ford V8; 351C; 460 (Part No.8580)
from
$438.99
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.
Product Features:
See More
Product Features:
- CNC machined billet aluminum housing and Dupont Rynite base
- No CARB Exemption Order Number
- Supplied w/Cap-A-Dapt and rotor (accepts MSD socket style caps)
- Must Be Used w/An MSD Ignition Control
- Mech. advance assem. can be locked out for crank trigger systems
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
MSD Ignition – Distributor; Ford 351W; Ready-to-Run (Part No.8354)
from
$569.99
MSD’s Ready-to-Run Ford distributors are the perfect upgrade for bulky Duraspark systems or ancient breaker point models. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you’ll find MSD’s accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives.
Product Features:
See More
Product Features:
- Now includes built-in Rev Limiter
- Built-in module produces a 7.5 amp single spark through high rpm
- Vacuum advance canister for improved economy (can be locked out)
- CNC machined billet aluminum housing and billet aluminum base
- Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Advance plate and weights are fine blanked from chrome moly steel
- Mech. advance assem. can be locked out for crank trigger systems
- Advance weight pins are staked and tig welded to the plate
- Nylon pads ensure smooth operation of the advance weights
MSD Ignition – Distributor; Ford 351W; Ready-to-Run; with Steel Gear (Part No.83541)
from
$691.99
MSD’s Ready-to-Run Ford distributors are the perfect upgrade for bulky Duraspark systems or ancient breaker point models. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 In. smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor you’ll find MSD’s accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives.
Product Features:
See More
Product Features:
- Equipped w/Steel Gear
- CARB E.O. Approved
- Does not require an MSD Ignition Control
- Supplied w/small dia. cap w/HEI style terminals; race and rotor
- Will accept PN[8441] Cap-A-Dapt
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
MSD Ignition – Rotor Assembly; Chevy V8 Cap-A-Dapt (Part No.8421)
from
$60.99
MSD Ignition is a company built on Customer Satisfaction and Service. That is why all of MSD products go through regimented test procedures before they are ever packaged and shipped. MSD stands behind its products for one full year after purchase
Product Features:
See More
Product Features:
- Rotor phasing can be adjusted.
- Ideal When Atomic TBI Is Controlling The Timing
Accel – Distributor Cap And Rotor Kit (Part No.8220)
Popular 1975 Ford Elite Performance Distributors Categories
1975 Ford Elite Performance Distributors
Maybe you’re in the middle of a full rebuild of that 1975 Ford Elite. Maybe you just need a couple of Performance Distributors. Either way, Advance Auto Parts has 7 different Performance Distributors in our inventory ranging from $60.99 to $691.99. That means you can find the exact parts or products you need to keep that 1975 Ford Elite running smoothly.
Performance Distributors are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1975 Ford Elite. Accel and MSD Ignition are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Distributors for your 1975 Ford Elite, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Distributors to keep your 1975 Ford Elite rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Distributors Brands To Make Your 1975 Ford Elite Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1975 Ford Elite demands trusted brand parts and products to keep it running. Many trusted brands of Performance Distributors make up Advance Auto Parts’ inventory, and all are ready to help make your Elite the best it can be. Be sure to browse some of our top Performance Distributors brands and parts.
FAQs for 1975 Ford Elite Performance Distributors
What are the most purchased Performance Distributors for the 1975 Ford Elite?
Out of 7 Performance Distributors for the 1975 Ford Elite, the most popular in our inventory are:
from
$64.99
This product is not rated
Distributor Cap And Rotor Kit
Performance Distributor Cap and Rotor Kits
from
$580.99
This product is not rated
Distributor; Ford TFI; 351W; no Module; Hydraulic Roll
Performance Distributors
