1975 Ford E-150 Econoline Fuel Pumps

Essential 1975 Ford E-150 Econoline Fuel Pumps

Delphi – Fuel Pump Hanger Assembly: With Float Arm (Part No.HP10195)

Fuel Pump Hanger Assembly: With Float Arm

from

$375.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Lower failure rates due to its innovative design and durability
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
See More

Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump, Sending Unit and Strainer (Part No.HS2510436)

Fuel Pump Hanger Assembly: Fuel Pump, Sending Unit and Strainer

from

$253.99
Carquest Premium fuel pump hanger assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump hanger assemblies are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump hanger assemblies are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Carquest Premium – Fuel Sender and Hanger Assembly (Part No.HS2542580)

Fuel Sender and Hanger Assembly

from

$88.99
Carquest Premium fuel tank sending units are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Carquest Premium fuel tank sending units are supplied with the wiring harness and gaskets or seals when required for the application. All sending units are precision-tested ensuring accurate readings at any fuel level. Carquest Premium fuel tank sending units are engineered with superior quality components to provide the longest life and are backed up by an industry-leading warranty.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Delphi – Series 7000 Fuel Module (Part No.E3001357730DEL)

Series 7000 Fuel Module

from

$271.91
Fuel modules are designed to provide uninterrupted flow of fuel to the engine at system pressure. Depending on customer needs, the Delphi Series 7000 Fuel Module can integrate a pump, fuel level sensor, fuel filter, reservoir with active and passive filling mechanisms, and regulator in a compact, modular package that is easy to install. The Delphi Series 7000 Fuel Module also offers an in-tank fuel filter with 10-12 µm filtration. The Delphi Series 7000 Fuel Module provides superior low fuel handling and fuel level sensing performance with its enhanced bottom reference design. It also offers reduced noise levels and improved pump durability compared to conventional fuel modules. The simplicity of design also results in lower cost. This module is targeted to meet California ZEV requirements.

Product Features:
  • Acetal cover can accommodate 116mm tank opening to permit integrated filter in reservoir
  • Single stage turbine pump provides quiet, energy efficient operation
  • Active reservoir-fill mechanism (high pressure jet pump) to maintain fuel supply in reservoir
  • Passive reservoir fill mechanism helps fill the reservoir at low-fuel volumes
  • High capacity filter media helps supply clean fuel to the injection system
  • Available serviceable in-tank fuel filter for markets with poor quality fuels
See More

Holley – Keith Dorton Series; VoluMax Race Series Fuel Pump (Part No.12-289-20)

Keith Dorton Series; VoluMax Race Series Fuel Pump

from

$206.99
Keith Dorton Series VoluMax race series fuel pump made from heavy duty construction for continuous high RPM operation. Redesigned high flow valves always ensure adequate fuel delivery. Fuel pressure regulator is required. Fuel body casting can be rotated

Product Features:
  • High Output Fuel Flow
  • Flows 170+ gph Free Flow
  • Shutoff Pressure Pre-Set At 8 PSI
  • Fuel Pressure Regulator Is Not Required
  • Heavy Duty Construction For Continuous High rpm Operation
  • Redesigned High Flow Valves Always Ensure Adequate Fuel Delivery
  • Fuel Body Casting Can Be Rotated For Plumbing Situations
  • Inlet And Outlet Tapped For 3/8 in. NPT
See More

Carquest Premium – Fuel Pump Hanger Assembly: Fuel Pump and Strainer (Part No.HS2521081)

Fuel Pump Hanger Assembly: Fuel Pump and Strainer

from

$207.99
Carquest Premium fuel pump hanger assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump hanger assemblies are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump hanger assemblies are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Delphi – Electric Fuel Pump: With Blade Terminal Connectors, Formed Hose Piece, Gasket, Clips, Seals (Part No.FE0127)

Electric Fuel Pump: With Blade Terminal Connectors, Formed Hose Piece, Gasket, Clips, Seals

from

$73.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Improved pump performance as a result of Delphi’s innovative design and durability
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Always replace the fuel strainer when doing a fuel pump repair
See More

Delphi – Series 7000 Fuel Module (Part No.E3001357729DEL)

Series 7000 Fuel Module

from

$314.05
Fuel modules are designed to provide uninterrupted flow of fuel to the engine at system pressure. Depending on customer needs, the Delphi Series 7000 Fuel Module can integrate a pump, fuel level sensor, fuel filter, reservoir with active and passive filling mechanisms, and regulator in a compact, modular package that is easy to install. The Delphi Series 7000 Fuel Module also offers an in-tank fuel filter with 10-12 µm filtration. The Delphi Series 7000 Fuel Module provides superior low fuel handling and fuel level sensing performance with its enhanced bottom reference design. It also offers reduced noise levels and improved pump durability compared to conventional fuel modules. The simplicity of design also results in lower cost. This module is targeted to meet California ZEV requirements.

Product Features:
  • Acetal cover can accommodate 116mm tank opening to permit integrated filter in reservoir
  • Single stage turbine pump provides quiet, energy efficient operation
  • Active reservoir-fill mechanism (high pressure jet pump) to maintain fuel supply in reservoir
  • Passive reservoir fill mechanism helps fill the reservoir at low-fuel volumes
  • High capacity filter media helps supply clean fuel to the injection system
  • Available serviceable in-tank fuel filter for markets with poor quality fuels
See More

Spectra Premium – Pump (Part No.SP154)

Pump

from

$123.99
CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.

Product Features:
  • Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
  • Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.
  • High-performance pump section assembly provides superior performance
  • Leading-edge inlet design to increase performance and efficiency, leading to longer life
  • High grade outer shell for life-long corrosion resistance
  • Optimized, precision-wound armature assembly for increased performance
See More

Carquest Premium – Fuel Pump Hanger Assembly HS219643: Fuel Pump, Sending Unit and Strainer (Part No.HS219643)

Fuel Pump Hanger Assembly HS219643: Fuel Pump, Sending Unit and Strainer

from

$77.99
Carquest Premium fuel pump modules and assemblies are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Spectra Premium – Sender Assembly; Includes Pump, Sender, Float and Strainer (Part No.SP374H)

Sender Assembly; Includes Pump, Sender, Float and Strainer

from

$73.99
CARQUEST fuel pump sender assemblies feature exact fit, with design improvements, such as upgraded polymers, brushes, and commutators to ensure lasting durability in multiple fuel blends. Also features advanced rust-inhibiting finish for longer life.

Product Features:
  • Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
  • Advanced rust-inhibiting finish for long-lasting durability
  • High-performance pump section assembly provides superior performance
  • Leading-edge inlet design to reduce friction and increase performance
  • Gradient density strainer designed for better contamination resistance
See More

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal, Clips, Splice Kit, Wire Harness (Part No.FG0947)

Fuel Pump Module Assembly: With Float Arm, Seal, Clips, Splice Kit, Wire Harness

from

$264.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Carquest Premium – Fuel Pump Hanger Assembly HS3521070: Fuel Pump, Sending Unit and Strainer (Part No.HS3521070)

Fuel Pump Hanger Assembly HS3521070: Fuel Pump, Sending Unit and Strainer

from

$199.99
Carquest Premium fuel pump modules and assemblies are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Carquest Premium – Electric Fuel Pump (Part No.E2515)

Electric Fuel Pump

from

$124.99


Product Features:
  • All CARQUEST fuel pumps are designed to meet or exceed OE specs and are 100% tested to ensure performance and long-life.
  • High-efficiency turbine technology provides quiet and precise fuel delivery
  • CARQUEST strainer uses polyester material to ensure filtration performance meet or exceed OE requirements.
See More

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Fuel Pump Mounting Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

1975 Ford E-150 Econoline Fuel Pumps

Maybe you’re in the middle of a full rebuild of that 1975 Ford E-150 Econoline. Maybe you just need a couple of Fuel Pumps. Either way, Advance Auto Parts has 9 different Fuel Pumps in our inventory ranging from $2.99 to $206.99. That means you can find the exact parts or products you need to keep that 1975 Ford E-150 Econoline running smoothly.

Fuel Pumps are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1975 Ford E-150 Econoline. Felpro, Carquest Premium, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Fuel Pumps for your 1975 Ford E-150 Econoline, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Fuel Pumps to keep your 1975 Ford E-150 Econoline rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Fuel Pumps Brands To Make Your 1975 Ford E-150 Econoline Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1975 Ford E-150 Econoline demands trusted brand parts and products to keep it running. Many trusted brands of Fuel Pumps make up Advance Auto Parts’ inventory, and all are ready to help make your E-150 Econoline the best it can be. Be sure to browse some of our top Fuel Pumps brands and parts.

Popular Felpro Fuel Pumps

We carry Felpro parts in our stock across Fuel Pump Block-Off Plate Gaskets categories, plus more. For a 1975 Ford E-150 Econoline, our most popular Felpro Fuel Pumps include:
Fuel Pump Mounting Gasket
from $2.99
(26)
Fuel Pump Mounting Gasket
Fuel Pump Block-Off Plate Gaskets

Top 1975 Ford E-150 Econoline Fuel Pumps from Mr. Gasket

Mr. Gasket products are another trusted brand when it comes to Fuel Pumps for your 1975 Ford E-150 Econoline. Popular Mr. Gasket parts include:
Electric Fuel Pump
from $64.99
(37)
Electric Fuel Pump
Fuel Pumps