1975 Dodge W300 Drivetrains
More 1975 Dodge W300 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1975 Dodge W300, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1975 Dodge W300 Drivetrains
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – Replacement Positraction Internals For Dana 60 (Full- And Semi-Floating) With 35 Spline Axles (Part No.16088)
from
$659.99
Yukon replacement positraction internals for Dana 60 (full- and semi-floating) with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Dana Spicer 60 with Trac Loc positraction with 35 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – Carrier Installation Kit For Dana 60 Differential (Part No.57005)
from
$194.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 60 differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60
- Includes carrier bearings and races and carrier shim kit
Yukon Gear – Steel Cover For Chrysler 9.25" Rear (Part No.32314)
Dorman – Differential Pinion Yoke Assembly (Part No.697-541)
from
$231.99
A worn or damaged differential pinion flange can lead to driveline vibrations and fluid leaks. This part is designed to match the performance of the original equipment pinion flange on specified vehicles. It has been engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is rusted, worn or damaged. It is made of rugged materials for reliable service and durability.
Product Features:
See More
Product Features:
- Direct replacement – this differential pinion flange is designed to match the performance of the original equipment flange on specified vehicles
- Ideal solution – engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is worn or damaged
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
National – Bearings (Part No.B-2414)
from
$24.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Spindle Nut Retainer, 2.030" I.D., 8 Bent Over TABS (Part No.33480)
from
$8.99
Spindle nut retainer, 2.030″ I.D., 8 bent over tabs. This replaces Spicer part number 33733.
Product Features:
See More
Product Features:
- Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
- 2.030″ I.D.
- 8 bent over tabs
Spicer – DIFF CLUTCH KIT (Part No.708203)
from
$131.99
DIFF CLUTCH KIT
National – Multi Purpose Seal (Part No.41461S)
from
$7.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size (Part No.41024)
from
$187.99
Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.0625″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a strap style yoke.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1330 u-joint size
- 3.625″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- Strap style
Driveworks – Tapered Roller Bearing (Part No.S-362-A)
Yukon Gear – Differential (Part No.26044)
from
$1119.99
Differential
National – Bearings (Part No.362A)
from
$14.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Drive Flange Cap For Dana 60 (Part No.32132)
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Dorman – Axle Nut Locking Wedge Key (sold by each) (Part No.615-135)
from
$3.49
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Richmond Gear – RngPnnInstlKt (Part No.83-1034-B)
from
$59.99
RngPnnInstlKt
Felpro – Differential Cover Gasket (Part No.RDS 6014)
from
$15.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Spicer – Universal Joint (Part No.SPL55-3X)
from
$81.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)
from
$34.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1310 u-joint size
- Includes two u-bolts and four nuts
Yukon Gear – Pinion Install Kit For Chrysler 9.25" Differential (Part No.13011)
from
$276.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Chrysler 9.25″ rear
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
USA Standard Gear – 4340 Chrome-Moly Replacement Inner Axle For GM & Dodge Dana 60 Front, 35 Spline (Part No.35123)
from
$299.99
Product Features:
See More
- Fits Dana Spicer 60 front in 1979-1991 GM and 1979-1990 Dodge trucks
- 4340 Chromoly
- Left hand inner axle
- 35 spline
- 35.1″ from end of splines to center of u-joint bore
Yukon Gear – Replacement Pinion Preload Shims For Dana 60, Dana 61 & Dana 70-U (Part No.55015)
National – Shaft Repair Sleeve (Part No.99138)
from
$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
USA Standard Gear – Master Overhaul Kit Dana 60 Front (Part No.37020)
from
$339.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 front
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.
National – Multi Purpose Seal (Part No.473204)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Flange Yoke For Chrysler 9.25" (Part No.41012)
from
$263.99
Yukon flange yoke for Chrysler 9.25″. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler 9.25″ rear
- 29 spline
- Round companion flange
MOOG Driveline Products – Double Cardan CV Centering Yoke (Part No.607)
from
$109.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Machined bodies to meet the tight tolerances
- Forged and cast material to meet the performance requirement
- Minimize the flash lines for less interference
- Cleaning process induces compressive strength for increased performance
- Machined and threaded holes for mounting ease
- Rust preventative added for longer shelf life
Popular 1975 Dodge W300 Drivetrains Categories
1975 Dodge W300 Drivetrains
You count on your 1975 Dodge W300 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 423 Drivetrains ranging in price from $2.29 to $1,487.99, you’re sure to find everything you need for your 1975 Dodge W300.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Moog, Driveworks, and Spicer. 1975 Dodge W300 Drivetrains start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,484 extensive product reviews on 1975 Dodge W300 Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.4 stars and Greaseable Super Strength Universal Joint with 4.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1975 Dodge W300 below to get started!
Top-Rated Drivetrains Brands For Your 1975 Dodge W300
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1975 Dodge W300 running right for years to come. In our inventory you’ll find brands like Moog, Driveworks, Spicer, and even more.
Popular Dorman Drivetrains
You’ll find popular Dorman brand products across Differentials. All are waiting to get your 1975 Dodge W300 back on the road. Some of the top-rated Dorman products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1975 Dodge W300, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1975 Dodge W300 Drivetrains
What are the most purchased Drivetrains for the 1975 Dodge W300?
Out of 423 Drivetrains for the 1975 Dodge W300, the most popular in our inventory are:
What are the top-rated 1975 Dodge W300 Drivetrains?
Top-rated Drivetrains for your 1975 Dodge W300 based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
