from

$64.99

Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Product Features:

Solid-state Worry Free Electronics
Internal Pressure Regulating
Universal Design Allows For Easy Installation
No DiaphraGMs Or Mechanical Parts To Wear Out
They Make An Excellent Fuel Transfer or Booster Pump
Not designed for use on aircraft of any type.
Hose Barbs Fit 5/16″ Fuel Hose
Self-priming, 2 wire design
Eliminates vapor lock and flooding

from

$2.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$85.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Unit is dual coated for enhanced corrosion protection
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Tested with OE fuel cap to prevent evaporative emission and check engine light failure

from

$12.99

Spectre’s triple chrome plated Fuel Pump Block Off Plate was designed for small block Chevrolet engines. Engineered for optimum fit and function, this kit includes a block off plate gasket and chrome mounting bolts with washers.

Product Features:

Necessary if switching to electric fuel pump
Includes block off plate gasket
Includes chrome mounting bolts with washers
Triple chrome plated

from

$211.99

All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X

Product Features:

Black AnodizedFinish
High Capacity Fuel Rails
For Use W/ Pro-Flo XT Manifold #7137
-6 AN Inlet / Outlet
Made In The USA

from

$83.99

Product Features:

EGR Adapter
Clears OEM Intake
Includes Gaskets and Bolts

from

$45.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$84.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$9.99

New Standard Replacement Fuel Tank Lock Ring, Includes O-Ring

Product Features:

Includes O-Ring
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$39.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$77.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$111.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel sending units meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Precision tested fuel level sensors ensures vehicles fuel gage will provide an accurate reading at any fuel level
Includes strainers for smoother installation process and ensures a clean fuel system upon replacement
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Manufactured with high quality material, ensuring the durability of this part to prevent costly repairs

from

$20.99

Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$1.29

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$149.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$23.99

Experience uncompromising quality and emissions compliance with these tethered fuel caps. Manufactured with top-tier materials and rigorous production and safety standards adhering to Original Equipment Manufacturer guidelines. Designed meticulously to meet both state and federal emissions requirements, it ensures environmental responsibility. With its specifically engineered pressure and vacuum relief valves, fuel evaporation becomes a thing of the past. Bid farewell to the risk of losing up to 30 gallons of precious gasoline over a year due to a leaking fuel cap. Trust in our superior construction to safeguard your fuel and contribute to a greener future.

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$40.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
Direct fit ensures safe, secure fuel tank installation
Product individually packaged and labeled to help reduce product damage prior to installation
Industry leading coverage on straps for plastic tanks

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$65.99

Product Features:

Reducer With O-Sensor Fitting
Made In USA

from

$65.99

Product Features:

Reducer With O-Sensor Fitting
Made In USA

from

$245.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Lock ring included with each tank to reduce installation time and to ensure a complete repair
Made with corrosion resistant, OE approved, Ni Terne steel for durability
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation

from

$226.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Lock ring included with each tank to reduce installation time and to ensure a complete repair
Made with corrosion resistant, OE approved, Ni Terne steel for durability
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation

from

$12.29

Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.

Product Features:

Nominally Rated At 170,000 PSI Tensile Strength
Properly Aligned
Conventional Hex Heads
Rust-Proof Stainless Bolts
170,000 PSI

from

$16.99

Ideal for mounting a stock original equipment pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

Product Features: