1975 Chevrolet Impala Drivetrains

Popular 1975 Chevrolet Impala Drivetrains Categories

Essential Drivetrains for 1975 Chevrolet Impalas

Powertrax – No-Slip Traction System (Part No.9207883005)

No-Slip Traction System

from

$551.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Positraction Internals For 8.5" GM With 28 Spline Axles (Part No.16052)

    Positraction Internals For 8.5" GM With 28 Spline Axles

    from

    $336.99
    Yukon positraction internals (0.795″ diameter) for 8.5″ GM with 28 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects. This kit is compatible with Yukon Dura Grip or Eaton positractions. It will not fit a factory Gov-Loc positraction.

    Product Features:
    • Spider gear kit
    • Fits GM 8.5″ with 28 spline Dura Grip positraction
    • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
    See More

    Yukon Gear – Standard Open Carrier Case, GM 7.625", 3.23 & Up (Part No.20089)

    Standard Open Carrier Case, GM 7.625", 3.23 & Up

    from

    $349.99
    Product Features:
    • Standard open carrier case
    • Fits GM 7.625″
    • 3.23 and up ratio only
    • Does not include spider gears
    See More

    MOOG Driveline Products – Double Cardan CV Flange Yoke (Part No.626)

    Double Cardan CV Flange Yoke

    from

    $84.99
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • Machined bodies to meet the tight tolerances
    • Forged and cast material to meet the performance requirement
    • Minimize the flash lines for less interference
    • Cleaning process induces compressive strength for increased performance
    • Machined and threaded holes for mounting ease
    • Rust preventative added for longer shelf life
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-HM-88510)

    Tapered Roller Bearing

    from

    $10.29
    Product Features:
    • Brand may vary by location
    See More

    GM Genuine Parts – Side Differential Bearing (Part No.S1380)

    Side Differential Bearing

    from

    $89.99
    GM Genuine Parts Differential Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings are low friction rotating elements that support the drive axle differential carrier within the axle or final drive housing. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

    Product Features:
    • Low friction rotating elements that support the drive axle differential carrier within the axle or final drive housing
    • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
    • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
    • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
    • GM regularly updates production and service part designs to integrate new materials and technologies
    See More

    Yukon Gear – Pinion Install Kit For GM 12 Bolt Car Differential (Part No.13056)

    Pinion Install Kit For GM 12 Bolt Car Differential

    from

    $232.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits GM 12 bolt passenger car
    • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
    See More

    National – Bearings (Part No.M804010)

    Bearings

    from

    $25.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Richmond Gear – Differential Mini Spool (Part No.78-1028-1)

    Differential Mini Spool

    from

    $124.99
    Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

    Product Features:
    • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
    • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
    • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
    • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
    • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
    See More

    Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6035)

    Center Support Bearing Motor Mount: Center, 1 Piece

    from

    $13.49
    Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 58-02; GMC 55-02; INTL 57-02;. Please verify your application.

    Product Features:
    • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
    • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
    • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
    • For Years: 1955-2002
    • Weight approx: 2 Lbs
    • BEARING ID / BORE: 1.1811 INCH / 30 MM
    • CENTERLINE: 3.50 INCH / 89 MM
    • MOUNT WIDTH: 1.50 INCH / 38 MM
    • COMPLETE MOUNT
    See More

    MOOG Driveline Products – Double Cardan CV Ball Seat Repair Kit (Part No.606)

    Double Cardan CV Ball Seat Repair Kit

    from

    $33.49
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • Designed for ease of installation
    • Includes necessary hardware
    • Designed for superior performance
    • Designed for ultimate strength
    • Increased tolerance for a performance fit
    • Meets deflection parameters
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

    Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

    from

    $148.99
    Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
    See More

    Dorman – Spindle Nut M27-2.0 (Part No.05107)

    Spindle Nut M27-2.0

    from

    $10.49
    Our Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

    Product Features:
    • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Motive Gear – Differential Spool (Part No.FS10-30)

    Differential Spool

    from

    $187.99


    Product Features:
    • FULL SPOOL GM 8.5 30 SPL ST MUST USE 2-LM102911 & 2-LM102949
    See More

    Yukon Gear – Notched Cross Pin Shaft For 7.5" GM (Part No.33435)

    Notched Cross Pin Shaft For 7.5" GM

    from

    $84.99
    Notched cross pin shaft for 7.5″ GM. This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.

    Product Features:
    • Cross pin shaft
    • Fits GM 7.5″
    • Notched
    • Not compatible with Spartan Lockers or Lock Rights
    See More

    Dorman – Help – Auto Transmission Case Vent (Part No.14689)

    Auto Transmission Case Vent

    from

    $6.99
    This transfer case vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

    Product Features:
    • Direct replacement – this transfer case vent is designed to match the fit and function of the original vent on specified vehicles.
    • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Spicer – Universal Joint (Part No.5-1350X)

    Universal Joint

    from

    $44.99
    You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
    See More

    Motive Gear – Differential Bearing Kit – Timken (Part No.R8.4RT)

    Differential Bearing Kit - Timken

    from

    $160.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • KIT BRG & SEAL ’55-64 CHEVY
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 55029)

    Differential Cover Gasket

    from

    $7.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Pro-King – Differential Cross Shaft (Part No.742G930)

    Differential Cross Shaft

    from

    $2.79
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Pro-King – Differential Pinion Shim Kit (Part No.742G202)

    Differential Pinion Shim Kit

    from

    $5.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Bearing Race Driver (Part No.56017)

    Bearing Race Driver

    from

    $215.99
    Bearing race driver. No return.

    Product Features:
    • Bearing race driver
    • Fits HM89410 race
    • All steel construction
    See More

    National – Multi Purpose Seal (Part No.9449)

    Multi Purpose Seal

    from

    $9.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Yukon Gear – Yoke For GM 7.5" And 7.625" (Mech 3R) In A Triple Lip Design (Part No.41088)

    Yoke For GM 7.5" And 7.625" (Mech 3R) In A Triple Lip Design

    from

    $154.99
    Yukon yoke for GM 7.5″ and 7.625″ (mech 3R) in a triple lip design. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside clips. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits GM 7.5″ and 7.625″
    • 27 spline
    • Mechanics 3R u-joint size
    • 2.556″ snap ring span
    • 1.125″ cap diameter
    • Inside snap ring design
    • Strap style
    See More

    Yukon Gear – 1541H Alloy Rear Axle For GM 7.5" Passenger (Part No.21261)

    1541H Alloy Rear Axle For GM 7.5" Passenger

    from

    $284.99
    Yukon 1541H alloy rear axle for GM 7.5″ passenger with a length of 30-1/2 inches and 26 splines. 2.775″ hub. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

    Product Features:
    • Fits 1977-1991 GM passenger car
    • 26 splines
    • 30 1/2″ long
    • 2.775″ brake pilot
    See More

    Yukon Gear – Positraction Clutch Guide (Part No.33352)

    Positraction Clutch Guide

    from

    $8.99
    Positraction clutch guide.

    Product Features:
    • Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
    • Compatible with Dura Grip positractions only
    See More

    Yukon Gear – Standard Open Side Gear Thrust Washer For 8.5" GM (Part No.33304)

    Standard Open Side Gear Thrust Washer For 8.5" GM

    from

    $15.99
    Standard open side gear thrust washer for 8.5″ GM.

    Product Features:
    • Side gear thrust washer
    • Fits GM 8.5″
    See More

    National – Multi Purpose Seal (Part No.9613S)

    Multi Purpose Seal

    from

    $7.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Upgrade your 1975 Chevrolet Impala with Top-Quality Drivetrains

    When it comes to maintaining or upgrading your 1975 Chevrolet Impala, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Drivetrains are key to keeping your Impala functioning at its best. At Advance Auto Parts, we offer a wide selection of 215 Drivetrains for the 1975 Chevrolet Impala, designed to meet your needs without breaking the bank. From Drive Shafts and Axle replacements to Universal Joints upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1975 Chevrolet Impala at great prices. Our Drivetrains inventory for this model ranges from just $2.49 to $1,566.99, with an average price of $178.89. Our 215 Drivetrains in stock come from 16 trusted brands, so you’re sure to find the right part for your 1975 Chevrolet Impala without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1975 Chevrolet Impala, we stock popular OEM and aftermarket Drivetrains from top names like Valvoline, FELPRO, Moog, and more. Valvoline Drivetrains start at just $14.49 and boast an impressive 5 stars average rating from customers. FELPRO and Moog also bring quality to the table, with Drivetrains available starting at $7.49, and at an average 5 stars rating. With 4,899 customer reviews and counting, our 1975 Chevrolet Impala Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1975 Chevrolet Impala is always ready to roll. We’re committed to providing you with everything you need to keep your Impala in top shape, all in one place. Start shopping confidently below for your 1975 Chevrolet Impala!

    Best-Selling Drive Shafts and Axles for 1975 Chevrolet Impalas

    Enhance the driving experience in your Chevrolet with 14 quality Drive Shafts and Axle components, starting at $6.49.

    Spicer – Universal Joint (Part No.5-1310X)

    Universal Joint

    from

    $35.99
    You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
    See More

    Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

    Axle Shaft Lock Assortment

    from

    $6.49
    This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    National – Bearings (Part No.A-5)

    Bearings

    from

    $16.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – R1563Tav Rear Axle Bearing And Seal Kit (Part No.10004)

    R1563Tav Rear Axle Bearing And Seal Kit

    from

    $42.99
    Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1563TAV axle bearing and seal kit, TorringtonBrand, 2.250″ OD, 1.400″ ID. This axle bearing & seal kit services one side only.

    Product Features:
    • Includes axle bearing and seal
    • Services one side
    • Torrington Brand
    • 2.250″ O.D.
    • 1.400″ I.D.
    See More

    Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)

    R1559Tv Rear Axle Bearing And Seal Kit

    from

    $52.99
    Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.

    Product Features:
    • Includes axle bearing and seal
    • Services one side
    • Torrington Brand
    • 2.530″ O.D.
    • 1.620″ I.D.
    See More

    Yukon Gear – C/Clip (Part No.33083)

    C/Clip

    from

    $8.99
    C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

    Product Features:
    • c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
    • .150″ thick
    See More

    Yukon Gear – Axle Seal, For 1559 Or 6408 Bearing (Part No.30201)

    Axle Seal, For 1559 Or 6408 Bearing

    from

    $7.99
    Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.

    Product Features:
    • Rear axle seal
    • 2.530″ O.D.
    See More

    Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6035)

    Center Support Bearing Motor Mount: Center, 1 Piece

    from

    $13.49
    Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 58-02; GMC 55-02; INTL 57-02;. Please verify your application.

    Product Features:
    • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
    • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
    • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
    • For Years: 1955-2002
    • Weight approx: 2 Lbs
    • BEARING ID / BORE: 1.1811 INCH / 30 MM
    • CENTERLINE: 3.50 INCH / 89 MM
    • MOUNT WIDTH: 1.50 INCH / 38 MM
    • COMPLETE MOUNT
    See More

    Yukon Gear – The Carrier Bearing Puller (Part No.56072)

    The Carrier Bearing Puller

    from

    $883.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    See More

    FAG US – WHEEL BEARING (Part No.KT10)

    WHEEL BEARING

    from

    $70.99
    WHEEL BEARING

    FAG US – BEARING – CRB (Part No.102549)

    BEARING - CRB

    from

    $64.99
    BEARING – CRB

    Spicer – SPICER U-JOINT (Part No.5-1310-1X)

    SPICER U-JOINT

    from

    $44.99
    SPICER U-JOINT

    Yukon Gear – Outer Axle Seal For Set9, Fits.490" Wide 8.2" Buick, Oldsmobile, And Pontiac (Part No.30169)

    Outer Axle Seal For Set9, Fits.490" Wide 8.2" Buick, Oldsmobile, And Pontiac

    from

    $42.99
    Outer axle seal for set9, fits.490″ wide 8.2″ Buick, Oldsmobile, and Pontiac applications only.Yukon Mighty seal.

    Product Features:
    • Outer axle seal
    • Fits 8.2″ Buick, Oldsmobile and Pontiac
    • 0.490″ wide
    See More

    Yukon Gear – Axle Seal For 5707 Or 1563 Bearing (Part No.30196)

    Axle Seal For 5707 Or 1563 Bearing

    from

    $6.99
    Axle seal for 5707 OR 1563 bearing.Yukon Mighty seal.

    Product Features:
    • Rear axle seal
    • 2.250″ O.D.
    See More

    Most Popular 1975 Chevrolet Impala Universal Joints

    Customize your Chevrolet with 32 Universal Joints products like U-Joints, U-Joint Strap Kits, and U-Joint U-Bolt Kits, all priced under $449.99.

    Spicer – Universal Joint (Part No.5-153X)

    Universal Joint

    from

    $28.99
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
    See More

    MOOG Driveline Products – Universal Joint U-Bolt Kit (Part No.329-10)

    Universal Joint U-Bolt Kit

    from

    $9.99
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • For U-Joints 353, 354, 361, 369 & 497
    • Fits 1-1/16″ bearings
    See More

    MOOG Driveline Products – Double Cardan CV Ball Seat Repair Kit (Part No.606)

    Double Cardan CV Ball Seat Repair Kit

    from

    $33.49
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • Designed for ease of installation
    • Includes necessary hardware
    • Designed for superior performance
    • Designed for ultimate strength
    • Increased tolerance for a performance fit
    • Meets deflection parameters
    See More

    Neapco – Universal Joint (Part No.1-0025)

    Universal Joint

    from

    $2.59
    Universal Joint Strap Kit
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.534G)

    Greaseable Premium Universal Joint

    from

    $26.99
    Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
    • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    • Cross forging shape and flash provide easier installation and high strength
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.369)

    Greaseable Premium Universal Joint

    from

    $19.99
    Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
    • STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
    • INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
    • RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    See More

    Driveworks – Universal Joint (Part No.DW-534G)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging to provide higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting allows for easy maintenance and the flexible use of the entire assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals are applied to optimize grease retention and reduce contamination
    See More

    MOOG Driveline Products – Universal Joint Strap Kit (Part No.530-10)

    Universal Joint Strap Kit

    from

    $11.99
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • For U-Joints 355, 372 & 534G
    • Contains two 1.81″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws
    See More

    MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.234)

    Non-Greaseable Super Strength Universal Joint

    from

    $32.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.269)

    Non-Greaseable Super Strength Universal Joint

    from

    $32.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.280)

    Greaseable Super Strength Universal Joint

    from

    $32.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    Spicer – Universal Joint (Part No.5-795X)

    Universal Joint

    from

    $50.99
    You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
    See More

    Neapco – Universal Joint (Part No.2-3010)

    Universal Joint

    from

    $8.99
    Universal Joint
    See More

    Driveworks – Universal Joint (Part No.DW-369)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.235)

    Greaseable Super Strength Universal Joint

    from

    $34.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    Spicer – Universal Joint (Part No.5-3147X)

    Universal Joint

    from

    $32.49
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
    See More

    Driveworks – Universal Joint (Part No.DW-235)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    Neapco – Universal Joint (Part No.2-3011)

    Universal Joint

    from

    $4.59
    Universal Joint
    See More

    Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)

    1310 U/Joint With Zerk Fitting On Cross

    from

    $44.99
    Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)

    1310 To 1330 Adapter U/Joint

    from

    $59.99
    Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.
    See More

    Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)

    1350 To 1410 Conversion U/Joint

    from

    $78.99
    Yukon 1350 to 1410 conversion u/joint.
    See More

    Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)

    1310 To Mechanics 3R Adapter U/Joint

    from

    $109.99
    Yukon 1310 to Mechanics 3R adapter U/Joint.
    See More

    Yukon Gear – 1350 Lifetime Series U/Joint (Part No.42021)

    1350 Lifetime Series U/Joint

    from

    $63.99
    Yukon 1350 Lifetime Series U/Joint. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)

    1350 U/Joint With Zerk Fitting

    from

    $51.99
    Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – Mechanics 3R Lifetime Series U/Joint (Part No.42020)

    Mechanics 3R Lifetime Series U/Joint

    from

    $65.99
    Yukon Mechanics 3R Lifetime Series U/Joint. 2.556″ span ring span, 1.125″ cap diameter. Inside snap ring.
    See More

    Yukon Gear – 7.5" And 8.5" GM Rear U/Joint Strap, Mech 3R (Part No.41201)

    7.5" And 8.5" GM Rear U/Joint Strap, Mech 3R

    from

    $23.99
    7.5″ and 8.5″ GM rear U/joint strap, Mech 3R.

    Product Features:
    • u-joint strap
    • Fits GM 7.5″, 7.625″ and 8.5″
    • Mechanics 3R u-joint size
    • One single strap
    See More

    Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)

    1310 Lifetime U/Joint

    from

    $57.99
    1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.
    See More

    Yukon Gear – Yoke For GM 8.5" With A 1310 U/Joint Size (Part No.41086)

    Yoke For GM 8.5" With A 1310 U/Joint Size

    from

    $449.99
    Yukon yoke for GM 8.5″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits GM 8.5″
    • 30 spline
    • 1310 u-joint size
    • Outside snap ring design
    • 3.219″ snap ring span
    • 1.062″ cap diameter
    • Strap style
    See More

    Yukon Gear – Forged Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41093)

    Forged Yoke For GM 8.5" With A 1350 U/Joint Size

    from

    $359.99
    Yukon forged yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits GM 8.5″
    • 30 spline
    • 1350 u-joint size
    • Outside snap ring design
    • 3.625″ snap ring span
    • 1.188″ cap diameter
    • Forged steel
    See More

    Yukon Gear – 1350 To Mechanics 3R Adaptor U/Joint (Part No.42001)

    1350 To Mechanics 3R Adaptor U/Joint

    from

    $111.99
    Yukon 1350 to Mechanics 3R adaptor U/joint.
    See More

    Yukon Gear – Mechanics 3R U/Joint (Part No.42014)

    Mechanics 3R U/Joint

    from

    $46.99
    Yukon Mechanics 3R U/Joint. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring.
    See More

    Yukon Gear – U/Joint Strap Bolt For 14T, 7.5", And 8.5" GM (Part No.33351)

    U/Joint Strap Bolt For 14T, 7.5", And 8.5" GM

    from

    $8.49
    U/joint strap bolt for 14T, 7.5″, and 8.5″ GM.

    Product Features:
    • u-joint strap bolt for GM 10.5″ 14 bolt truck, 7.5″ and 8.5″
    See More

    Top Picks for 1975 Chevrolet Impala Differentials

    Upgrade Chevrolet Impalas with top-quality Differentials parts, including 153 OEM and aftermarket selections for your 1975 model.

    Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

    DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

    from

    $14.49
    Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

    Product Features:
    • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
    • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
    • Developed with anti-wear technology to help improve transmission durability
    • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
    See More

    Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

    DEX/MERC Automatic Transmission Fluid, 1 Gallon

    from

    $35.99
    Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

    Product Features:
    • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
    • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
    • Developed with anti-wear technology to help improve transmission durability
    • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
    See More

    Driveworks – Oil Seal (Part No.S-2043)

    Oil Seal

    from

    $7.79
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1100)

    Differential Pinion Shim Kit

    from

    $7.49
    High-quality Differential Component Shim

    Product Features:
    • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
    See More

    National – Shaft Repair Sleeve (Part No.99193)

    Shaft Repair Sleeve

    from

    $43.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Mr. Gasket – Differential Gasket (Part No.84B)

    Differential Gasket

    from

    $18.09
    Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1964-1970 Chevrolet 8.2 inch 10 bolt & 1970-1981 GM 8.5 inch ring gear

    Product Features:
    • .047″ thick cellulose/nitrile composite gasket material
    • Precision die cut
    • Reusable
    See More

    Motive Gear – Differential Ring and Pinion (Part No.GM10-342A)

    Differential Ring and Pinion

    from

    $235.99


    Product Features:
    • GM 10BL 8.5 R/P 3.42A MG FRT/REAR
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 55028-1)

    Differential Cover Gasket

    from

    $9.99
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 55029)

    Differential Cover Gasket

    from

    $7.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Motive Gear – Differential Ring and Pinion (Part No.GM10-373A)

    Differential Ring and Pinion

    from

    $241.99


    Product Features:
    • GM 10BL 8.5 R/P 3.73A MG FRT/REAR
    See More

    National – Bearings (Part No.M802048)

    Bearings

    from

    $23.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Motive Gear – Differential Ring and Pinion (Part No.GM10-373)

    Differential Ring and Pinion

    from

    $243.99


    Product Features:
    • GM 10BL 8.5 R/P 3.73 MG FRT/REAR
    See More

    Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R10RMK)

    Differential Master Bearing Kit - Koyo

    from

    $156.99


    Product Features:
    • KIT BRG&SL GM 8.5″ 10 BLT MSTR NON IFS FRONT / REAR
    See More

    Motive Gear – Differential Master Bearing Kit – Timken (Part No.R10RMKT)

    Differential Master Bearing Kit - Timken

    from

    $135.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • KIT BRG & SEAL GM 10 BOLT MASTER NON IFS FRONT / REAR
    See More

    Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R10REMK)

    Differential Master Bearing Kit - Koyo

    from

    $113.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • GM 10 BOLT 8.5″ MSTR KIT W/EATON OR AUBURN PRO
    See More

    Dorman – Ring And Pinion Bearing Installation Kit (Part No.697-100)

    Ring And Pinion Bearing Installation Kit

    from

    $195.99
    This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.

    Product Features:
    • Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications.
    • Related repair – smart to have on hand when installing a differential ring and pinion.
    • Durable construction – built for reliable longevity, free of defects in materials and workmanship
    • Trustworthy quality – backed by team of designers and engineers in the United States
    See More

    Motive Gear – Differential Carrier Shim Kit (Part No.1101)

    Differential Carrier Shim Kit

    from

    $8.49
    High-quality Differential Carrier Shim Kit

    Product Features:
    • CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
    See More

    Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

    3 Qt - 80W90 Conventional Gear Oil With Posi Additive

    from

    $57.99
    3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

    Product Features:
    • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
    See More

    Motive Gear – Ring Gear Bolt (Part No.14066913)

    Ring Gear Bolt

    from

    $2.49


    Product Features:
    • RING GEAR BOLT 8.5″ 7.5″ 7/16 X 20 LEFT HAND
    See More

    Yukon Gear – Ring Gear Bolt (Part No.33049)

    Ring Gear Bolt

    from

    $6.99
    Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.

    Product Features:
    • Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
    • 7/16″ x 20
    See More

    Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

    Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

    from

    $9.99
    5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

    Product Features:
    • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
    • 1/2″ head
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

    Tapered Roller Bearing

    from

    $16.99
    Product Features:
    • Brand may vary by location
    See More

    National – Bearings (Part No.M804049)

    Bearings

    from

    $38.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Driveworks – Taper Bearing Cup (Part No.S-LM-501314)

    Taper Bearing Cup

    from

    $7.29
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Motive Gear – Crush Sleeve (Part No.1234726)

    Crush Sleeve

    from

    $4.29
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
    See More

    Yukon Gear – Minor Install Kit For GM 8.5" Rear Differential (Part No.12055)

    Minor Install Kit For GM 8.5" Rear Differential

    from

    $48.99
    Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (includes Supershims)

    Product Features:
    • Fits GM 8.5″ rear
    • Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
    See More

    Yukon Gear – Chrome Cover For 8.6", 8.5" And 8.2" GM Rear (Part No.32017)

    Chrome Cover For 8.6", 8.5" And 8.2" GM Rear

    from

    $74.99
    Chrome cover for 8.6″, 8.5″ and 8.2″ GM rear.

    Product Features:
    • Fits GM 8.2″, 8.5″ and 8.6″
    • Chrome
    See More

    Yukon Gear – Pinion Nut (Part No.33152)

    Pinion Nut

    from

    $9.99
    Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.

    Product Features:
    • Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
    • 7/8″ x 14 thread
    • 1 1/4″ socket
    See More

    USA Standard Gear – Standard Spider Gear Set For GM 8.5", 30 Spline (Part No.39027)

    Standard Spider Gear Set For GM 8.5", 30 Spline

    from

    $214.99
    Product Features:
    • Spider gear kit
    • Fits GM 8.5″ 30 spline open differential
    • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

    Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

    from

    $148.99
    Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
    See More

    Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

    Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

    from

    $27.99
    8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

    Product Features:
    • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
    See More

    Motive Gear – Differential Carrier Gear Kit (Part No.GM10BI)

    Differential Carrier Gear Kit

    from

    $111.99


    Product Features:
    • GM10 BOLT 8.5″ 28 SPL INTERNAL KIT (OPEN)
    See More

    USA Standard Gear – Standard Spider Gear Set For GM 8.5", 28 Spline (Part No.39026)

    Standard Spider Gear Set For GM 8.5", 28 Spline

    from

    $209.99
    Product Features:
    • Spider gear kit
    • Fits GM 8.5″ 28 spline open differential
    • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

    Redline Synthetic "Shock Proof" Oil - 3 Quarts

    from

    $99.99
    Redline Synthetic “Shock Proof” Oil. 3 Quarts.

    Product Features:
    • Includes three quarts of Redline Shockproof oil
    See More

    Yukon Gear – Crush Sleeve Eliminator Kit For GM 8.5" & Chrysler 9.25" (Part No.55048)

    Crush Sleeve Eliminator Kit For GM 8.5" & Chrysler 9.25"

    from

    $57.99
    Product Features:
    • Crush sleeve eliminator kit for GM 8.5″, 8.6″ and Chrysler 9.25″ rear
    See More

    Yukon Gear – Pinion Seal For GM 8.5", 8.2", Buick, Oldsmobile, And Pontiac (Part No.30017)

    Pinion Seal For GM 8.5", 8.2", Buick, Oldsmobile, And Pontiac

    from

    $9.99
    Pinion seal for GM 8.5″, 8.2″, Buick, Oldsmobile, and Pontiac.Yukon Mighty seal.

    Product Features:
    • Pinion seal
    • Fits GM 8.5″ rear, 8.2″ and 8.2″ in Buick, Oldsmobile and Pontiac
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.G885488)

    Performance Differential Ring and Pinion

    from

    $232.99


    Product Features:
    • GM 10BL 8.5 R/P 4.88 FRT/REAR MGP
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

    Redline Synthetic "Shock Proof" Oil - 4 Quarts

    from

    $137.99
    Redline Synthetic “Shock Proof” Oil. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil
    See More

    Yukon Gear – Standard Open Cross Pin (0.795" Diameter) For 8.5" GM – Fits Some Eaton Positractions (Part No.33401)

    Standard Open Cross Pin (0.795" Diameter) For 8.5" GM - Fits Some Eaton Positractions

    from

    $49.99
    Standard open cross pin (0.795″ diameter) for 8.5″ GM. fits some Eaton positractions.

    Product Features:
    • Cross pin shaft for GM 8.5″ and 8.6″
    • Fits standard open differentials only
    • 0.795″ diameter
    See More

    Yukon Gear – 7.2" GM 7.5" GM & 8.2" GM Pinion Seal (Part No.30192)

    7.2" GM 7.5" GM & 8.2" GM Pinion Seal

    from

    $9.99
    7.2″ GM 7.5″ GM & 8.2″ GM pinion seal.Yukon Mighty seal.

    Product Features:
    • Pinion seal
    • Fits GM 7.2″ IFS, 1999 and down GM 7.5″ and 7.625″ and GM 8.2″
    • 2.660″ O.D.
    See More

    Yukon Gear – 8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer – Also Fits 8.5" Eaton With 0.795" Cross Pin (Part No.33385)

    8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer - Also Fits 8.5" Eaton With 0.795" Cross Pin

    from

    $10.99
    8.5″ & 8.6″ GM standard Open pinion gear Thrust washer. also fits 8.5″ Eaton with 0.795″ cross pin.

    Product Features:
    • Pinion gear thrust washer for GM 8.5″ and 8.6″
    • Fits standard open differentials only
    • 0.795″ I.D.
    See More

    Yukon Gear – Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles (Part No.26016)

    Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles

    from

    $929.99
    The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit has larger bearing journals for added strength & uses heavy-duty carrier bearings & races.

    Product Features:
    • Fits GM 8.5″ and 8.6″ with 30 spline axles
    • 2.73 ratio and up only
    • 4-spring, clutch style positraction
    • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
    • Fully rebuildable
    • Assembled in the USA
    See More

    Yukon Gear – Crush Sleeve For GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan Titan Rear – Approx 0.620" Long (Part No.33097)

    Crush Sleeve For GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan Titan Rear - Approx 0.620" Long

    from

    $5.99
    Replacement Crush Sleeve for GM 7.6″ IRS, 8.5″, 8.6″, 8.75″, 8.875″ & Nissan Titan rear. Approx 0.620″ long.

    Product Features:
    • Crush sleeve for Jeep JK rear, GM 7.6″ IRS, 8.5″ and 8.6″ and Nissan Titan rear
    • 0.620″ tall
    See More

    Motive Gear – Differential Ring and Pinion (Part No.GM10-390)

    Differential Ring and Pinion

    from

    $233.99


    Product Features:
    • GM 10BL 8.5 R/P 3.90 MG FRT/REAR
    See More

    Dorman – Differential Ring And Pinion Set (Part No.697-301)

    Differential Ring And Pinion Set

    from

    $316.99
    This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.

    Product Features:
    • Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications.
    • Effective fix – eliminates grinding and whining from failed original bearings.
    • Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
    • Trustworthy quality – backed by team of designers and engineers in the United States
    See More

    Yukon Gear – Master Overhaul Kit For GM 8.5" Rear Differential (Part No.14086)

    Master Overhaul Kit For GM 8.5" Rear Differential

    from

    $284.99
    Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. Includes Supershims.

    Product Features:
    • Fits GM 8.5″ rear
    • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
    See More

    Yukon Gear – Cast Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41092)

    Cast Yoke For GM 8.5" With A 1350 U/Joint Size

    from

    $234.99
    Yukon cast yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits GM 8.5″
    • 30 spline
    • 1350 u-joint size
    • Outside snap ring design
    • 3.625″ snap ring span
    • 1.188″ cap diameter
    • Strap style
    See More

    Yukon Gear – Standard Open Carrier Case, GM 8.5", 2.73 & Up (Part No.20083)

    Standard Open Carrier Case, GM 8.5", 2.73 & Up

    from

    $239.99
    8.5″ GM standard Open case, 2.73 & up, 28 or 30 spline.

    Product Features:
    • Standard open carrier case
    • Fits GM 8.5″ with 28 or 30 spline axles
    • 2.73 and up ratio only
    • Does not include spider gears
    See More

    In-Demand CV Axles and Joints for 1975 Chevrolet Impalas

    Select from 1 premium CV Axles and Joints parts for your 1975 Chevrolet Impala.

    MOOG Driveline Products – Double Cardan CV Flange Yoke (Part No.626)

    Double Cardan CV Flange Yoke

    from

    $84.99
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • Machined bodies to meet the tight tolerances
    • Forged and cast material to meet the performance requirement
    • Minimize the flash lines for less interference
    • Cleaning process induces compressive strength for increased performance
    • Machined and threaded holes for mounting ease
    • Rust preventative added for longer shelf life
    See More

    Most Sold 1975 Chevrolet Impala Transfer Cases

    Explore our best-selling Chevrolet parts for the 1975 Impala among 11 OEM and aftermarket options starting from $5.19.

    National – Bearings (Part No.M88048)

    Bearings

    from

    $15.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.M88010)

    Bearings

    from

    $10.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Multi Purpose Seal (Part No.9449)

    Multi Purpose Seal

    from

    $9.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    National – Multi Purpose Seal (Part No.5200)

    Multi Purpose Seal

    from

    $12.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Dorman – Help – Auto Transmission Case Vent (Part No.14689)

    Auto Transmission Case Vent

    from

    $6.99
    This transfer case vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

    Product Features:
    • Direct replacement – this transfer case vent is designed to match the fit and function of the original vent on specified vehicles.
    • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    National – Multi Purpose Seal (Part No.9613S)

    Multi Purpose Seal

    from

    $7.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Driveworks – Oil Seal Kit (Part No.S-5200)

    Oil Seal Kit

    from

    $6.79
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    National – Bearings (Part No.M804010)

    Bearings

    from

    $25.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    FAG US – CUP (Part No.M88010)

    CUP

    from

    $11.29
    CUP

    FAG US – SHAFT SEAL (Part No.SS2960)

    SHAFT SEAL

    from

    $9.59
    SHAFT SEAL

    FAG US – SHAFT SEAL (Part No.SS2569)

    SHAFT SEAL

    from

    $5.19
    SHAFT SEAL

    Top-Rated Drivetrains Brands For Your 1975 Chevrolet Impala

    Shop for the best-rated brands offering Drivetrains and other products for your 1975 Chevrolet Impalas. Below you’ll find some of our best rated Drivetrains from Valvoline, FELPRO, and Moog, and more. Drivetrains from these brands that fit a 1975 Impala start at just $7.49 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

    Popular Valvoline 1975 Chevrolet Impala Drivetrains

    When it comes to maintaining or upgrading your 1975 Chevrolet Impala, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 1975 Chevrolet Impala. With over 2 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.49, with an average price of just $25.24. Plus, with over 19 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
    from
    $14.49

    (2)

    DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

    “I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
    I pu”

    DEX/MERC Automatic Transmission Fluid, 1 Gallon
    from
    $35.99

    (17)

    DEX/MERC Automatic Transmission Fluid, 1 Gallon

    “Equivalent to oem”

    Popular FELPRO 1975 Chevrolet Impala Drivetrains

    FELPRO auto parts is one of the highest quality Drivetrain brands in the market. Any 1975 Chevrolet Impala owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 1975 Impala, Advance Auto Parts carries a full inventory of 2 FELPRO Drivetrains. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these FELPRO Drivetrains range from $7.49 to $9.99, plus, with more than 202 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

    Differential Cover Gasket
    from
    $9.99

    (195)

    Differential Cover Gasket

    “Product easy to put on and easy to work with worked great so far”

    Differential Cover Gasket
    from
    $7.49

    (7)

    Differential Cover Gasket

    “good”

    FAQs for 1975 Chevrolet Impala Drivetrains

    Which Drivetrains are best-sellers for 1975 Chevrolet Impalas?

    Out of 215 Drivetrains that fit 1975 Chevrolet Impalas, the following parts are the top sellers:

    What’s the price range for 1975 Chevrolet Impala Drivetrains?

    Drivetrain prices for the 1975 Chevrolet Impala start at $2.49 and go up to $1,566.99 for the most premium parts.

    What’s the average price of a Drivetrain for a 1975 Chevrolet Impala?

    The average price for Drivetrains for the 1975 Chevrolet Impala is $178.89. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Drivetrains for other Chevrolet Impala model years?

    Yes, we currently carry Drivetrains for 51 model years of Chevrolet Impalas between 1958 and 2020. Drivetrains are bought most frequently for the following model years: 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, and 2012.

    What are the cheapest Drivetrains for my 1975 Chevrolet Impala?

    The cheapest 1975 Chevrolet Impala Drivetrains we carry in stock are:

    What are the top-rated Drivetrains that fit the 1975 Chevrolet Impala?

    Out of 4,899 reviews by customers, our 1975 Chevrolet Impala Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1975 Chevrolet Impala and their top-rated products:

    What types of Drivetrains do you sell for my 1975 Chevrolet Impala?

    Can I get help with 1975 Chevrolet Impala Drivetrain orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Drivetrains and more.

    What is your return policy for Chevrolet Impala Drivetrains?

    Advance Auto Parts keeps returns simple. For new Chevrolet Impala Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.