1975 Cadillac Fleetwood Exhaust Parts

Essential Exhaust Parts for 1975 Cadillac Fleetwoods

Walker – CalCat Universal Converter (Part No.80828)

CalCat Universal Converter

from

$182.99
Walker®, an industry leader for many popular European, Asian and North American vehicles, offers Walker® CalCat® Universal Catalytic Converters, available for OBDII (1996 and newer) vehicles and Pre-OBD (1995 and older) vehicles, specifically formulated to comply with California Air Resource Board (CARB) regulations. Walker® CalCat® Universal Catalytic Converters feature OE-style hangers, brackets, routings and heat shields allowing quick and easy installation of direct-fit units. OE expertise delivers application-engineered parts, providing the best fit and performance for even the most challenging emissions issues, while premium substrate material and a high-technology wash coat ensure exceptional oxygen storage capacity. Walker® CalCat® Catalytic Converters are legal for sale in the state of California, and any state complying with California regulations.

Product Features:
  • Legal for sale in the state of California, complies with C.A.R.B. regulations
  • Stainless steel body with aluminized pipe and heat shields for durability
  • Expandable bushings for custom installation requirements
  • Universal converter may require modification to complete installation
  • 5-year/50,000-mile catalytic performance and structural integrity warranty
See More

Walker – CalCat CARB Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.81127)

CalCat CARB Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID)

from

$465.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:
  • CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
  • SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
See More

Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15032)

Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed

from

$171.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker Universal Catalytic Converters are available for pre-OBDII (1995 and older) vehicles.

Product Features:
  • EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
  • NO BREAK IN REQUIRED — Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
See More

Walker – Ultra EPA Universal Catalytic Converter 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.93238)

Ultra EPA Universal Catalytic Converter 2.5" Inlet (ID) 2.5" Outlet (ID)

from

$224.99
Designed to comply with EPA emissions requirements while delivering premium performance and durability with assured compliance, Walker Ultra Universal Catalytic Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
See More

Walker – Exhaust Clamp (Part No.35337)

Exhaust Clamp

from

$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Clamp (Part No.35336)

Exhaust Clamp

from

$2.49
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.75 (Part No.35793)

Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.75

from

$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Clamp (Part No.35723)

Exhaust Clamp

from

$36.99
Walker, with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today’s emissions control needs, while developing solutions for tomorrow’s challenges. Walker is a ‘one-stop’ convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broadmarket, performance, and commercial vehicle applications. Walker delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.

Product Features:
  • Walker offers a variety of clamp styles and sizes for your installation needs
  • Helps to ensure a leak-free connection
  • Constructed from durable and robust material for long life
  • New Walker® accessories help to ensure effective exhaust repairs
  • Walker® supplies all of the accessories you need to do the complete exhaust job
See More

Walker – Exhaust Tail Pipe 2.25" Inlet (OD) 2.25" Outlet (OD) (Part No.41206)

Exhaust Tail Pipe 2.25" Inlet (OD) 2.25" Outlet (OD)

from

$23.79
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)

Terminator; Exhaust Tips

from

$85.99


Product Features:
  • Show Quality Chrome Platinum
  • Durable Black Finish
  • Can Be Welded Or Clamped
  • Complete The System
  • Glass-Packed Resonators
See More

Dorman – Help – Manifold Bolt and Spring Kit – 3/8-16 x 2-13/16 In. (Part No.03134)

Manifold Bolt and Spring Kit - 3/8-16 x 2-13/16 In.

from

$9.99
Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.

Product Features:
  • Ideal replacement – the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type.
  • Complete installation – this kit includes hardware required for securely attaching the manifold to the exhaust system
  • Trustworthy construction – the kit’s bolt and spring are made of hardened steel for durable, long-lasting service life
  • Quality tested – kit components have undergone extensive testing to ensure proper function and long service life
See More

Taylor Gaskets – Vibe Lock Header Bolt Kit (Part No.310004)

Vibe Lock Header Bolt Kit

from

$89.99
Vibe Lock Header Bolt Kit

Dorman – Help – Exhaust Manifold Hardware Kit – 3/8-16 In. (Part No.03401)

Exhaust Manifold Hardware Kit - 3/8-16 In.

from

$11.99
Our Exhaust Stud and Nut provides you with the proper stud and nut for repairing or installing your manifold. Save time and energy by having the right hardware on hand when you need it.

Product Features:
  • Direct replacement – this engine manifold stud and nut match the fit and function of the original stud and nut on specified years, makes and models.
  • Ideal solution – replaces missing or damaged hardware to ensure a thorough manifold installation or repair
  • Durable construction – made of quality materials for reliable service life
  • Quality assured – backed by a team of product engineers based in the United States
See More

Taylor Gaskets – Vibe-Lock Bolt (Part No.310001)

Vibe-Lock Bolt

from

$102.99
Vibe-Lock Bolt

Walker – Hanger Length 2.25 (Part No.35148)

Hanger Length 2.25

from

$10.49
Complete your exhaust repair with Walker exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.

Product Features:
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • OE DESIGN — Designed with OE-style features for easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS — Made from quality steel for durability and long life
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Dorman – Help – Exhaust Stud Kit – M10-1.5 x 62mm (Part No.03133)

Exhaust Stud Kit - M10-1.5 x 62mm

from

$17.29
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.

Product Features:
  • Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
  • Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
  • Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Double Ended Stud Kit – 3/8-16 x 1-1/4 in and 3/8-16 x 7/16 in (Part No.29200)

Double Ended Stud Kit - 3/8-16 x 1-1/4 in and 3/8-16 x 7/16 in

from

$9.99
This exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, this hardware is engineered for reliable performance.

Product Features:
  • Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
  • Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
  • Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Exhaust Stud Kit – 3/8-16 x 3-5/16 In. (Part No.03106)

Exhaust Stud Kit - 3/8-16 x 3-5/16 In.

from

$11.29
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.

Product Features:
  • Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
  • Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
  • Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Walker – SoundFX Universal Exhaust Muffler 2.5" Inlet (ID) 2.25" Outlet (ID) (Part No.17824)

SoundFX Universal  Exhaust Muffler 2.5" Inlet (ID) 2.25" Outlet (ID)

from

$218.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Walker – Quiet-Flow SS Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.22317)

Quiet-Flow SS Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.25" Outlet (ID)

from

$111.99
The only broad-market muffler with 100% stainless-steel construction, Walker Quiet-Flow SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.

Product Features:
  • CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Walker – Sound Solution Muffler (Part No.18753)

Sound Solution Muffler

from

$62.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More

Walker – SoundFX Muffler, Universal/ Fabrication Needed (Part No.18141)

SoundFX Muffler, Universal/ Fabrication Needed

from

$87.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18235)

SoundFX Muffler, Direct Replacement, No Fabrication Needed

from

$65.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Felpro – Exhaust Manifold Gasket Set (Part No.MS 90021)

Exhaust Manifold Gasket Set

from

$11.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

Felpro – Exhaust Manifold Gasket Set (Part No.MS 90508)

Exhaust Manifold Gasket Set

from

$11.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

Mr. Gasket – Copper Seal: Exhaust Gasket Set (Part No.7154)

Copper Seal: Exhaust Gasket Set

from

$59.19
Mr. Gasket CopperSEAL Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.

Product Features:
  • Manufactured from ¿Dead Soft¿ (solid) .043″ thick copper material
  • Manufactured from ┐Dead Soft┐ (solid) .043″ thick copper material
  • .051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094″
  • Provides excellent sealing and durability
  • Conforms to and seals minor surface irregularities
  • For high performance street, drag race, oval track and turbocharged (extreme heat) applications
  • Ideal For Tow Vehicles
  • Ideal For Motorhomes
See More

Edelbrock – Exhaust Manifold Gasket Set for Chevrolet (Part No.7248)

Exhaust Manifold Gasket Set for Chevrolet

from

$23.99
Edelbrock part #7248 Exhaust Gaskets are designed for 1992-97 Chevy LT1 V8 engines. These Exhaust Gaskets are made of EnCore HTX-900; a high-density non-asbestos fiber/metal core composite material consisting of two graphite coated, heat resistant fiber b

Product Features:
  • 0.0625 in. Thickness
  • 1.385 in. x 1.400 in. Port Size (D shape)
  • For SB Chevy
  • Black Color
  • Two Piece Configuration
See More

Felpro – EXHAUST MANIFOLD GASKET SET (Part No.MS 95585)

EXHAUST MANIFOLD GASKET SET

from

$26.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

Upgrade your 1975 Cadillac Fleetwood with Top-Quality Exhaust Parts

When it comes to maintaining or upgrading your 1975 Cadillac Fleetwood, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Exhaust Parts are key to keeping your Fleetwood functioning at its best. At Advance Auto Parts, we offer a wide selection of 11 Exhaust Parts for the 1975 Cadillac Fleetwood, designed to meet your needs without breaking the bank. From Exhaust Hanger replacements to Catalytic Converters upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 1975 Cadillac Fleetwood at great prices. Our Exhaust Parts inventory for this model ranges from just $2.99 to $396.98, with an average price of $99.06. Our 11 Exhaust Parts in stock come from 4 trusted brands, so you’re sure to find the right part for your 1975 Cadillac Fleetwood without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1975 Cadillac Fleetwood, we stock popular OEM and aftermarket Exhaust Parts from top names like Walker Flowtech, and more. Walker Exhaust Parts start at just $2.99 and boast an impressive 4 stars average rating from customers. With 56 customer reviews and counting, our 1975 Cadillac Fleetwood Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1975 Cadillac Fleetwood is always ready to roll. We’re committed to providing you with everything you need to keep your Fleetwood in top shape, all in one place. Start shopping confidently below for your 1975 Cadillac Fleetwood!

Best-Selling Exhaust Hangers for 1975 Cadillac Fleetwoods

Enhance the driving experience in your Cadillac with 1 quality Exhaust Hanger components, starting at $13.99.

Walker – Exhaust System Hanger (Part No.35183)

Exhaust System Hanger

from

$13.99
Complete your exhaust repair with Walker exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.

Product Features:
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • OE DESIGN — Designed with OE-style features for easy installation
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS — Made from quality steel for durability and long life
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Most Popular 1975 Cadillac Fleetwood Catalytic Converters

Customize your Cadillac with 2 Catalytic Converters products like Catalytic Converters, all priced under $396.98.

Walker – CATALYTIC CONVERTER (Part No.81328)

CATALYTIC CONVERTER

from

$396.98
CATALYTIC CONVERTER

Walker – CalCat Universal Converter (Part No.80828)

CalCat Universal Converter

from

$182.99
Walker®, an industry leader for many popular European, Asian and North American vehicles, offers Walker® CalCat® Universal Catalytic Converters, available for OBDII (1996 and newer) vehicles and Pre-OBD (1995 and older) vehicles, specifically formulated to comply with California Air Resource Board (CARB) regulations. Walker® CalCat® Universal Catalytic Converters feature OE-style hangers, brackets, routings and heat shields allowing quick and easy installation of direct-fit units. OE expertise delivers application-engineered parts, providing the best fit and performance for even the most challenging emissions issues, while premium substrate material and a high-technology wash coat ensure exceptional oxygen storage capacity. Walker® CalCat® Catalytic Converters are legal for sale in the state of California, and any state complying with California regulations.

Product Features:
  • Legal for sale in the state of California, complies with C.A.R.B. regulations
  • Stainless steel body with aluminized pipe and heat shields for durability
  • Expandable bushings for custom installation requirements
  • Universal converter may require modification to complete installation
  • 5-year/50,000-mile catalytic performance and structural integrity warranty
See More

Top Picks for 1975 Cadillac Fleetwood Exhaust Mufflers

Upgrade Cadillac Fleetwoods with top-quality Exhaust Mufflers parts, including 3 OEM and aftermarket selections for your 1975 model.

Walker – Quiet-Flow Direct Fit Exhaust Muffler 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.21856)

Quiet-Flow Direct Fit Exhaust Muffler 2.5" Inlet (ID) 2.5" Outlet (ID)

from

$131.99
Designed to deliver superior flow and OE-style sound, Walker Quiet-Flow mufflers are available for top-selling domestic and foreign vehicles.

Product Features:
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • RESISTS CORROSION — Internal drainage system helps reduce moisture collection
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Walker – Sound Solution Muffler (Part No.18649)

Sound Solution Muffler

from

$64.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More

Walker – SoundFX Universal Exhaust Muffler 2.5" Inlet (ID) 2.25" Outlet (ID) (Part No.18112)

SoundFX Universal  Exhaust Muffler 2.5" Inlet (ID) 2.25" Outlet (ID)

from

$83.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

In-Demand Exhaust Fittings for 1975 Cadillac Fleetwoods

Select from 2 premium Exhaust Fittings parts for your 1975 Cadillac Fleetwood, with prices ranging from $2.99 to $8.99.

Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.75 (Part No.35793)

Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.75

from

$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Clamp (Part No.35337)

Exhaust Clamp

from

$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Most Sold 1975 Cadillac Fleetwood Exhaust Manifold and Headers

Explore our best-selling Cadillac parts for the 1975 Fleetwood among 1 OEM and aftermarket options starting from $102.99.

Taylor Gaskets – Vibe-Lock Bolt (Part No.310001)

Vibe-Lock Bolt

from

$102.99
Vibe-Lock Bolt

Top-Rated Exhaust Parts Brands For Your 1975 Cadillac Fleetwood

Shop for the best-rated brands offering Exhaust Parts and other products for your 1975 Cadillac Fleetwoods. Below you’ll find some of our best rated Exhaust Parts from Walker and Flowtech, and more. Exhaust Parts from these brands that fit a 1975 Fleetwood start at just $2.99 and are rated as high as 4 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Walker 1975 Cadillac Fleetwood Exhaust Parts

When it comes to maintaining or upgrading your 1975 Cadillac Fleetwood, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Walker ticks all of those boxes. We offer a wide selection of Walker Exhaust Parts, specifically designed for the 1975 Cadillac Fleetwood. With over 8 Walker brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.99, with an average price of just $110.86. Plus, with over 9 customer reviews and an average rating of 4 stars, you can trust that our Walker Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Exhaust System Hanger
from
$13.99
This product is not rated

Exhaust System Hanger

“”

SoundFX Universal  Exhaust Muffler 2.5" Inlet (ID) 2.25" Outlet (ID)
from
$83.99
This product is not rated

SoundFX Universal Exhaust Muffler 2.5" Inlet (ID) 2.25" Outlet (ID)

“”

CATALYTIC CONVERTER
from
$396.98
This product is not rated

CATALYTIC CONVERTER

“”

Popular Flowtech 1975 Cadillac Fleetwood Exhaust Parts

Flowtech auto parts is one of the highest quality Exhaust Part brands in the market. Any 1975 Cadillac Fleetwood owner should feel confident when installing genuine Flowtech parts in their vehicle. To ensure the best fit and performance for your 1975 Fleetwood, Advance Auto Parts carries a full inventory of 1 Flowtech Exhaust Parts. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Flowtech Exhaust Parts range up to $85.99, plus, with more than 5 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.

Terminator; Exhaust Tips
from
$85.99

(5)

Terminator; Exhaust Tips

“very nice…worth the money.”

FAQs for 1975 Cadillac Fleetwood Exhaust Parts

Which Exhaust Parts are best-sellers for 1975 Cadillac Fleetwoods?

Out of 11 Exhaust Parts that fit 1975 Cadillac Fleetwoods, the following parts are the top sellers:

What’s the price range for 1975 Cadillac Fleetwood Exhaust Parts?

Exhaust Part prices for the 1975 Cadillac Fleetwood start at $2.99 and go up to $396.98 for the most premium parts.

What’s the average price of a Exhaust Part for a 1975 Cadillac Fleetwood?

The average price for Exhaust Parts for the 1975 Cadillac Fleetwood is $99.06. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Exhaust Parts for other Cadillac Fleetwood model years?

Yes, we currently carry Exhaust Parts for 31 model years of Cadillac Fleetwoods between 1965 and 1996. Exhaust Parts are bought most frequently for the following model years: 1996, 1995, 1994, 1993, 1992, 1991, 1990, 1989, and 1988.

What are the cheapest Exhaust Parts for my 1975 Cadillac Fleetwood?

The cheapest 1975 Cadillac Fleetwood Exhaust Parts we carry in stock are:

What are the top-rated Exhaust Parts that fit the 1975 Cadillac Fleetwood?

Out of 56 reviews by customers, our 1975 Cadillac Fleetwood Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 1975 Cadillac Fleetwood and their top-rated products:

What types of Exhaust Parts do you sell for my 1975 Cadillac Fleetwood?

As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 1975 Cadillac Fleetwood:

Can I get help with 1975 Cadillac Fleetwood Exhaust Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Exhaust Parts and more.

What is your return policy for Cadillac Fleetwood Exhaust Parts?

Advance Auto Parts keeps returns simple. For new Cadillac Fleetwood Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.