1975 Buick Skylark Steering and Chassis Parts

Essential 1975 Buick Skylark Steering and Chassis Parts

MOOG – Ball Joint (Part No.K3082)

Ball Joint

from

$36.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Larger grease reservoir and easy-to-install pre-tapped grease fitting hole for improved maintenance
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Powercraft – Steering Gear Complete Pitman Shaft Seal Kit (Part No.8766)

Steering Gear Complete Pitman Shaft Seal Kit

from

$25.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Steering Column Housing Repair Kit (Part No.CSE1461)

Steering Column Housing Repair Kit

from

$31.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Driveworks – Steering Tie Rod End (Part No.DW-ES443L)

Steering Tie Rod End

from

$17.29
When replaced, Driveworks tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts help ensure improved steering response and durability.
See More

National – Multi Purpose Seal (Part No.7013S)

Multi Purpose Seal

from

$20.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Rare Parts – Tie Rod End (Part No.RP25397)

Tie Rod End

from

$124.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Carquest Premium – Pressure Hose Assembly (Part No.35457)

Pressure Hose Assembly

from

$63.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)

Pump Drive Shaft Seal Kit

from

$10.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K5241)

Stabilizer Bar Bushing Kit

from

$8.79
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)

Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)

from

$5.99
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)

Driveworks – Ball Joint (Part No.DW-K6145T)

Ball Joint

from

$36.99
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Premium Polychloroprene boot provides extended temperature range and better wear resistance
  • Test-proven stud material helps prevent premature stud failure
  • Provides premium gauge steel construction for strength and durability
  • Performance tested to ensure durability
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Tie Rod Dust Boot

from

$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Carquest Premium – Repair Fittings (Part No.35010)

Repair Fittings

from

$20.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Rare Parts – Center Link (Part No.RP25878)

Center Link

from

$294.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Forged steel
  • Heat treated components
  • Improves steering response
See More

Dorman – Help – GM Power Steering Cap (Part No.82605)

GM Power Steering Cap

from

$21.49
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:
  • Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
  • Durable construction – made of quality materials for leak-free performance and a long service life
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
See More

National – Multi Purpose Seal (Part No.50151S)

Multi Purpose Seal

from

$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi Purpose Seal (Part No.474131)

Multi Purpose Seal

from

$11.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -40°F to 225°F / -40°C to 107°C
  • Good low temperature capability
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More

Cardone – Power Steering Pump (Part No.20-36900)

Power Steering Pump

from

$99.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Lares – Remanufactured Power Steering Gear Box (Part No.972)

Remanufactured Power Steering Gear Box

from

$520.99
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Energy Suspension – Ball Joint Dust Boot Set (Part No.9.13128R)

Ball Joint Dust Boot Set

from

$10.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Lasts Longer
  • Looks Great
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$26.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Powercraft – Steering Gear Complete Rebuild Kit (Part No.8522)

Steering Gear Complete Rebuild Kit

from

$116.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

National – Bearings (Part No.A-2)

Bearings

from

$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

MOOG – Tie Rod End Adjusting Sleeve (Part No.ES2004S)

Tie Rod End Adjusting Sleeve

from

$31.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Coated for corrosion resistance
  • Engineered to meet or exceed OE Performance
  • Wrench flats on housing and stud provide easy installation and alignment adjustment.
  • Polished Stud ball provides low socket torque.
  • Stud design is optimized to provide ideal stud swing and strength for each application.
See More

Rare Parts – Sway Bar Bushing (Part No.RP15841)

Sway Bar Bushing

from

$24.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

MOOG – Stabilizer Bar Link Kit (Part No.K700532)

Stabilizer Bar Link Kit

from

$18.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • The Grade 8 coated bolt makes the link extremely durable
  • Features an enhanced solid hex spacer of strong, lightweight, anodized T-6 aluminum to resist corrosion
  • Heavy-duty bushings made from new urethane material are extremely durable, absorbing road shocks while resisting oil, heat and ozone
  • Bushings feature new patent-pending stress reliefs to improve durability and sensitivity to installation torque
  • Black phosphate barrel nut and washers provide corrosion protection.
See More

Powercraft – Steering Gear Input Shaft Seal Kit (Part No.7095)

Steering Gear Input Shaft Seal Kit

from

$31.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

MOOG – Idler Arm (Part No.K5143)

Idler Arm

from

$70.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Heavy-duty design
  • Loose or worn chassis parts can lead to premature tire wear
  • Engineered steel composition results in a stronger component
  • Powdered metal gusher bearing design enables grease to flow through bearing to
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

1975 Buick Skylark Steering and Chassis Parts

You count on your 1975 Buick Skylark to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 91 Steering and Chassis Parts ranging in price from $2.49 to $981.99, you’re sure to find everything you need for your 1975 Buick Skylark.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 15 different brands like Imperial, Carquest Premium, and Moog. 1975 Buick Skylark Steering and Chassis Parts start as low as $2.49!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 4,418 extensive product reviews on 1975 Buick Skylark Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Bearings with 4.7 stars and Stabilizer Bar Link Kit with 4.8 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1975 Buick Skylark below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 1975 Buick Skylark

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1975 Buick Skylark running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Moog, and even more.

Popular Energy Suspension Steering and Chassis Parts

You’ll find popular Energy Suspension brand products across Tie Rods and Sway Bars. All are waiting to get your 1975 Buick Skylark back on the road. Some of the top-rated Energy Suspension products in these categories are:
Tie Rod Dust Boot
from $9.99
(3)
Tie Rod Dust Boot
Tie Rod End Boots
Sway Bar End Link Kit
from $26.99
(2)
Sway Bar End Link Kit
Sway Bar Link Kits

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1975 Buick Skylark, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Coolers
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Quick Connect Coupler
from $11.49
(3)
Quick Connect Coupler
Power Steering Coolers

FAQs for 1975 Buick Skylark Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 1975 Buick Skylark?

Out of 91 Steering and Chassis Parts for the 1975 Buick Skylark, the most popular in our inventory are:
Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)
from $5.99
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Return Hoses
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Steering Tie Rod End Adjusting Sleeve
from $17.79
(38)
Steering Tie Rod End Adjusting Sleeve
Tie Rod End Sleeves

What are the top-rated 1975 Buick Skylark Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 1975 Buick Skylark based on customer reviews/ratings are:
Bearings
from $15.99
(38)
Bearings
“1976 Cutlass. Seem like a good bearing”
Stabilizer Bar Link Kit
from $12.49
(29)
Stabilizer Bar Link Kit
“Good”
Ball Joint
from $28.49
(29)
Ball Joint
“It’s a ball joint. Better than what I took out. It fits just fine. However, the hardware is questionable. I decided to use it just to see if it lasts.”