1974 Volvo 164 Drivetrains

Essential 1974 Volvo 164 Drivetrains

USA Standard Gear – Spartan Locker for Dana 30 Differential with 27 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17000)

Spartan Locker for Dana 30 Differential with 27 Spline Axles, Includes Heavy-duty Cross Pin Shaft

from

$639.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect. Does not fit Std. JK Carrier. Use YC D706008

Product Features:
  • Fits Dana Spicer 30 with 27 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

SKF – Wheel Bearing (Part No.K8000390037SKF)

Wheel Bearing

from

$54.25
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.

Product Features:
  • Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
  • 100% tested to the actual OE specifications per part number for fit, form and function
  • High quality steel and surface finishes
  • Proper implementation of heat treatment
See More

Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)

Zip Locker Bulkhead Quick-Disconnect Fitting

from

$18.99
Product Features:
  • Bulkhead quit connect fitting
See More

Yukon Gear – High Performance Ring & Pinion Replacement Gear Set For Dana 30 In A 3.54 Ratio (Part No.24018)

High Performance Ring & Pinion Replacement Gear Set For Dana 30 In A 3.54 Ratio

from

$439.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits standard rotation Dana Spicer 30 without crush sleeve
  • 7.20″ ring gear diameter
  • 26 spline pinion
  • 10 ring gear bolts
  • 3.54 ratio
See More

Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)

Dana 30 / 44 Roll Pin Replacement

from

$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.

Product Features:
  • Roll pin for Dana Spicer 30 and Dana Spicer 44
  • 0.235″ diameter
See More

Yukon Gear – Replacement Cover Gasket For Dana 30 (Part No.23003)

Replacement Cover Gasket For Dana 30

from

$12.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 30
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

SKF – Pinion Seal, Red (Part No.J701050573SKF)

Pinion Seal, Red

from

$16.92
Pinion Seal, Red

National – Shaft Repair Sleeve (Part No.99147)

Shaft Repair Sleeve

from

$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Set Up Bearing (Part No.56036)

Set Up Bearing

from

$172.99
Set-up carrier bearing kit (2 bearings, no races) LM501349. No return.

Product Features:
  • Set up bearing kit
  • Fits Dana Spicer 30
  • Easily slips on and off carrier journals to allow for easier carrier shim adjustment
See More

Yukon Gear – Zip Locker For Dana 30 With 27 Spline Axles, 3.73 & Up (Part No.34016)

Zip Locker For Dana 30 With 27 Spline Axles, 3.73 & Up

from

$1303.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.

Product Features:
  • Fits Dana Spicer 30 with 27 spline axles
  • 3.73 and up ratio only
  • Forged case and 8620 internals for added strength
  • Works with a variety of air delivery systems
  • Assembled in the USA
See More

Yukon Gear – Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24 (Part No.33038)

Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 - 3/8" X 24

from

$11.99
Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8″ x 24.

Product Features:
  • Ring gear bolt for Dana Spicer 25, 27, 30, 44 and AMC Model 35
  • 3/8″ x 24 thread
See More

Yukon Gear – Minor Install Kit For Dana 30 Rear Differential (Part No.12014)

Minor Install Kit For Dana 30 Rear Differential

from

$135.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits Dana Spicer 30 rear
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

National – Bearings (Part No.A-6)

Bearings

from

$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)

Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement

from

$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.

Product Features:
  • Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
See More

Yukon Gear – Pinion Install Kit For Dana 30 Rear Differential (Part No.13017)

Pinion Install Kit For Dana 30 Rear Differential

from

$279.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 30 rear
  • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
See More

FAG – Drive Shaft Support Bearing (Part No.K1040390203FAG)

Drive Shaft Support Bearing

from

$40.95
FAG drive shaft support bearings are built to meet or exceed OE specifications. FAG Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination.

Product Features:
  • Original equipment design and quality
  • Utilizes OE equivalent or better materials
  • Pre-Lubricated and reinforced seals
See More

Yukon Gear – Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement (Part No.33012)

Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement

from

$6.99
Product Features:
  • Inner oil slinger for Dana Spicer 25, 27, 30, 44 and 50
See More

Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana 30 With 27 Spline Axles (Part No.16073)

Replacement Standard Open Spider Gear Kit For Dana 30 With 27 Spline Axles

from

$155.99
Yukon replacement standard open spider gear kit for Dana 30 with 27 spline axles and with or without quick disconnect. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit Dana Spicer 30 open differential with 27 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

National – Shaft Repair Sleeve (Part No.99155)

Shaft Repair Sleeve

from

$38.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Replacement Yoke For Dana 30, 44, 50, And 300 With 26 Spline And A 1310 U/Joint Size (Part No.41018)

Replacement Yoke For Dana 30, 44, 50, And 300 With 26 Spline And A 1310 U/Joint Size

from

$121.99
Yukon replacement yoke for Dana 30, 44, 50, and Dana 300 with 26 spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 44
  • 26 spline
  • 1310 u-joint size
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • U-bolt style
See More

Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)

1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts

from

$18.99
1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.

Product Features:
  • u-joint strap kit
  • Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
  • 1310 and 1330 u-joint size
  • Includes two straps and four bolts
See More

Yukon Gear – 1330 U/Joint U-Bolts, 5/16" X 1-9/16", (7260 & 7290 Billet) (Part No.41199)

1330 U/Joint U-Bolts, 5/16" X 1-9/16", (7260 & 7290 Billet)

from

$15.99
1330 U/joint U-bolts, 5/16″ X 1-9/16″, (7260 & 7290 BILLET).

Product Features:
  • u-joint u-bolt kit
  • Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
  • 1330 u-joint size
  • Includes two u-bolts and four nuts
See More

Yukon Gear – Replacement Pinion Nut For Dana 25, 27, 30, 36, 44, 53 & GM 7.75" (Part No.33143)

Replacement Pinion Nut For Dana 25, 27, 30, 36, 44, 53 & GM 7.75"

from

$6.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Pinion nut for Dana Spicer 25, 27, 30, 44, 50 and GM 7.75″
  • 3/4″ x 16 thread
See More

Yukon Gear – Dana 30 Side Gear Thrust Washer (Part No.33284)

Dana 30 Side Gear Thrust Washer

from

$10.99
Dana 25, Dana 27, & Dana 30 side gear Thrust washer.

Product Features:
  • Side gear thrust washer for Dana Spicer 25, 27, 30 and AMC Model 35
  • 1.560″ I.D.
  • Fits standard open differentials only
See More

Popular 1974 Volvo 164 Drivetrains Categories

1974 Volvo 164 Drivetrains

You count on your 1974 Volvo 164 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 124 Drivetrains ranging in price from $1.63 to $1,303.99, you’re sure to find everything you need for your 1974 Volvo 164.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Valvoline, Moog, and Driveworks. 1974 Volvo 164 Drivetrains start as low as $1.63!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,127 extensive product reviews on 1974 Volvo 164 Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.6 stars and Non-Greaseable Super Strength Universal Joint with 4.3 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1974 Volvo 164 below to get started!

Top-Rated Drivetrains Brands For Your 1974 Volvo 164

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1974 Volvo 164 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.

Popular Spicer Drivetrains

You’ll find popular Spicer brand products across Universal Joints and Drive Shafts and Axles. All are waiting to get your 1974 Volvo 164 back on the road. Some of the top-rated Spicer products in these categories are:
Universal Joint
from $35.99
(2)
Universal Joint
U-Joints
Universal Joint
from $28.99
(12)
Universal Joint
Axle Shaft Universal Joints

FAQs for 1974 Volvo 164 Drivetrains

What are the most purchased Drivetrains for the 1974 Volvo 164?

Out of 124 Drivetrains for the 1974 Volvo 164, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $19.99
(82)
Greaseable Premium Universal Joint
U-Joints
Taper Bearing Set
from $10.29
(38)
Taper Bearing Set
Differential Bearings
Universal Joint
from $15.99
(33)
Universal Joint
U-Joints

What are the top-rated 1974 Volvo 164 Drivetrains?

Top-rated Drivetrains for your 1974 Volvo 164 based on customer reviews/ratings are:
Greaseable Super Strength Universal Joint
from $32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
Non-Greaseable Super Strength Universal Joint
from $32.99
(28)
Non-Greaseable Super Strength Universal Joint
“installed as needed”
Bearings
from $16.99
(25)
Bearings
“Fit like it should no issues”