1974 Jeep Wagoneer Drivetrains
More 1974 Jeep Wagoneer Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1974 Jeep Wagoneer, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1974 Jeep Wagoneer Drivetrains
Yukon Gear – Dana 44 / 60 And GM 8.5" Inner Front Disconnect Seal Replacement (Part No.30122)
from
$13.99
Inner front disco replacement seal for 4WD Dana 44, Dana 60, and 8.5″ straight axle.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Inner front axle seal
- Fits Dodge disconnect front with Dana Spicer 44 or 60, reverse rotation Dana Spicer 44 and GM 8.5″
Yukon Gear – Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size (Part No.41022)
from
$233.99
Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 and 70
- 29 spline
- 1310 u-joint size
- Outside snap ring design
- 3.219″ snap ring span
- 1.062″ cap diameter
- Strap style
Yukon Gear – Pinion Install Kit For Dana 60 Rear Differential (Part No.13032)
from
$295.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 rear
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)
Milemarker – Service Kit (Part No.402SK)
from
$47.49
Service Kit
Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)
from
$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Redi-Sleeve yoke saver
- Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)
from
$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 60, 70 and 80
- 3/8″
Powertrax – No-Slip Traction System (Part No.9203822705)
from
$527.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
National – Wheel Bearing and Seal Kit (Part No.SBK-1)
from
$19.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Spindle bearing and seal kit
- Includes all components required to complete the repair
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Motive Gear – Differential Carrier Gear Kit (Part No.706027XR)
Dorman – Spindle Washer – I.D. 1-5/8 In. O.D. 2-3/16 In. Thickness 1/8 In. (Part No.618-040.1)
from
$6.99
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Needa Parts – Differential Plug, Rubber, Chrysler 2008-2000 (Part No.65293)
from
$5.99
This differential cover plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential cover plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Needle Bearing (Part No.S-B-2110)
from
$7.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Drive Flange Cap For Dana 44 (Part No.32134)
Yukon Gear – Replacement Cover Gasket For Dana 30 (Part No.23003)
Driveworks – Tapered Roller Bearing (Part No.S-LM-603011)
Omix – U-Bolt (Part No.18204.04)
from
$20.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Front
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Yukon Gear – O-Ring For Toyota & Dana 44 Zip Locker Seal Housing (Part No.34004)
from
$11.29
Product Features:
See More
- O-ring for seal housing
- Fits Dana Spicer 44 and Toyota 8″ and V6
Yukon Gear – Dana 44 And GM 8.5" Outer Stub Axle Replacement (Part No.21086)
from
$148.99
Yukon 1541H replacement outer stub axle shaft for Dana 44 and 8.5″ GM with a length of 9.94 inches and with 19 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H front axles come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 in GM truck and Blazer and Jeep Wagoneer with disc brakes
- Outer stub
- 19 spline
- 9.94″ from end of splines to center of u-joint bore
Driveworks – Oil Seal (Part No.S-722109)
from
$5.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.223253)
from
$17.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Bearings (Part No.HM88610)
from
$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Seal (Part No.4370N)
from
$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia – Knurl (Part No.33181)
from
$5.99
Model 20 & Model 35 axle stud 0.620″ Dia. Shank.
Product Features:
See More
Product Features:
- Axle stud for AMC Model 20 and Model 35
- 1/2″ x 20 thread
- 0.620″ knurl diameter
- 1.625″ long
Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R8.25RMK)
from
$109.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- KIT BRG&SL CHRY.MSTR 8.25
MOOG Driveline Products – Double Cardan CV Centering Yoke (Part No.607)
from
$109.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Machined bodies to meet the tight tolerances
- Forged and cast material to meet the performance requirement
- Minimize the flash lines for less interference
- Cleaning process induces compressive strength for increased performance
- Machined and threaded holes for mounting ease
- Rust preventative added for longer shelf life
National – Bearings (Part No.31594)
from
$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Spindle Nut M24-1.5 Hex Size 36mm (sold by each) (Part No.615-149)
from
$3.29
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1974 Jeep Wagoneer Drivetrains Categories
1974 Jeep Wagoneer Drivetrains
You count on your 1974 Jeep Wagoneer to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 410 Drivetrains ranging in price from $3.29 to $1,487.99, you’re sure to find everything you need for your 1974 Jeep Wagoneer.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Valvoline, Moog, and Driveworks. 1974 Jeep Wagoneer Drivetrains start as low as $3.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 9,186 extensive product reviews on 1974 Jeep Wagoneer Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.6 stars and Multi Purpose Seal with 4.4 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1974 Jeep Wagoneer below to get started!
Top-Rated Drivetrains Brands For Your 1974 Jeep Wagoneer
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1974 Jeep Wagoneer running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1974 Jeep Wagoneer back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1974 Jeep Wagoneer Drivetrains
What are the most purchased Drivetrains for the 1974 Jeep Wagoneer?
Out of 410 Drivetrains for the 1974 Jeep Wagoneer, the most popular in our inventory are:
What are the top-rated 1974 Jeep Wagoneer Drivetrains?
Top-rated Drivetrains for your 1974 Jeep Wagoneer based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
from
$14.99
(20)
Multi Purpose Seal
“THIS WAS a project to install because of where it is located in the shift housing. go on this site:[@] click on axle tech. this was a big help. but s”
