1974 GMC G15/G1500 Van Ignition Wires

Essential 1974 GMC G15/G1500 Van Ignition Wires

MSD Ignition – Wire Set; Super Conductor; Small Block Chevy with L.P. Distributor (Part No.31249)

Wire Set; Super Conductor; Small Block Chevy with L.P. Distributor

from

$122.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
  • For high EMI suppression
  • Conductor core features Dupont Kevlar material
  • Proprietary compound sleeves for resistance to high heat/abrasion
See More

MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy; Socket (Part No.31593)

Wire Set; Black Super Conductor; Small Block Chevy; Socket

from

$153.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
  • For high EMI suppression
  • Conductor core features Dupont Kevlar material
  • Proprietary compound sleeves for resistance to high heat/abrasion
See More

MSD Ignition – Wire Set; Super Conductor; Small Block Chevy; Socket Distributor Cap (Part No.31599)

Wire Set; Super Conductor; Small Block Chevy; Socket Distributor Cap

from

$153.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
  • For high EMI suppression
  • Conductor core features Dupont Kevlar material
  • Proprietary compound sleeves for resistance to high heat/abrasion
See More

MSD Ignition – Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI (Part No.31179)

Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI

from

$133.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.

Product Features:
  • Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
  • Incl. both socket-style and spark plug-style boots and terminals
  • Includes Mini-Stripper-Crimper For Factory Style Crimps
  • Size Includes [6] 90 Deg. Boots/Terminals
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

Accel – Universal Fit 300+ Race Spark Plug Wire Set (Part No.7030)

Universal Fit 300+ Race Spark Plug Wire Set

from

$149.99
For mounting on non-stock applications, for remote location. Choice of 4 core types. Female and male distributor towers. Terminal crimper and anvil tools. Includes silicone lube, boots and terminals. 20 piece kit.

Product Features:
  • 150 Ohms Per Foot
  • 8.8mm Oversize Silicone Jacket
  • Stainless-Steel Spark Plug Terminals
  • Suppression of EMI/RFI
  • 600-Degree Double Silicone Construction
  • Spiral-Wound Copper/Nickel Alloy
See More

MSD Ignition – Wire Set; Street Fire; SBC; Socket Distributor Cap over VC (Part No.5565)

Wire Set; Street Fire; SBC; Socket Distributor Cap over VC

from

$61.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

Mallory – Pro Sidewinder Spark Plug Wire Kit (Part No.947)

Pro Sidewinder Spark Plug Wire Kit

from

$125.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit; includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:
  • Most Advanced Wire By Mallory
  • RFI Suppression
  • High Temperature Silicone Jacket
  • Withstands Over 500+F
  • Come In Ready To Use Kits
  • Extra Long Kits
See More

Accel – Universal Fit Super Stock 8mm Spiral; Spark Plug Wire Set (Part No.5041B)

Universal Fit Super Stock 8mm Spiral; Spark Plug Wire Set

from

$84.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these Super Stock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • Silicone Spark Plug Boots
  • 90 Degree Spark Plug Boot Angle
  • 450 Degree Wire Temperature Rating
  • Meets Or Exceeds OE Boot Temperature Rating
  • Meets or Exceeds OE Resistance
  • Cooper Core
  • 500 Ohms Resistance
See More

Accel – Universal Fit Spiral 8.8mm Core Spark Plug Wire Set (Part No.8030)

Universal Fit Spiral 8.8mm Core Spark Plug Wire Set

from

$83.99
Universal Fit Spiral 8.8mm Core Spark Plug Wire Set; 90-Degree; with Points-Style Distributor Cap; Yellow.

Product Features:
  • 8.8mm Graphite Suppression
  • Silicone Spark Plug Boots
  • 550-Degree Double Silicone Construction
  • Fiberglass Braid
  • Spiral-Wound Stainless-Steel Alloy
  • Magnetic Suppression
See More

MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy with L.P. Distributor (Part No.31243)

Wire Set; Black Super Conductor; Small Block Chevy with L.P. Distributor

from

$122.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
  • For high EMI suppression
  • Conductor core features Dupont Kevlar material
  • Proprietary compound sleeves for resistance to high heat/abrasion
See More

Accel – Universal Fit Super Stock 8mm Spiral; Spark Plug Wire Set (Part No.5041R)

Universal Fit Super Stock 8mm Spiral; Spark Plug Wire Set

from

$116.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these Super Stock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms Per Foot Of Resistance
  • 550 Degree F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street/Strip Use
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

Accel – Universal Fit Graphite Suppression; Spark Plug Wire Set (Part No.8026)

Universal Fit Graphite Suppression; Spark Plug Wire Set

from

$128.99
These ACCEL carbon and graphite core wire sets virtually eliminate RFI noise, while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

Product Features:
  • Heavy Duty 8.8mm Oversized Silicone Jacket
  • 500 Ohms/ft. Of Resistance
  • 550 Degree Double Silicone Construction
  • Fiberglass Braid
  • Carbon/Graphite Core
  • Magnetic Suppression
  • Fiberglass/Kevlar Core
  • 500 Ohms Resistance
See More

Accel – Universal Fit Super Stock 7mm Copper; Spark Plug Wire Set (Part No.3009)

Universal Fit Super Stock 7mm Copper; Spark Plug Wire Set

from

$49.99
Upgrade for pre-HEI street applications, silicone jacket with fiberglass braid is rated at 450 degrees Fahrenheit, tinned copper core. Includes 8 blue extra-long wires, coil lead, silicone boots, zinc-plated steel terminals. Requires terminal and boot installation on distributor end of wires.

Product Features:
  • Suppression Core
  • Universal Fit
See More

1974 GMC G15/G1500 Van Ignition Wires

Maybe you’re in the middle of a full rebuild of that 1974 GMC G15/G1500 Van. Maybe you just need a couple of Ignition Wires. Either way, Advance Auto Parts has 13 different Ignition Wires in our inventory ranging from $49.99 to $153.99. That means you can find the exact parts or products you need to keep that 1974 GMC G15/G1500 Van running smoothly.

Ignition Wires are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1974 GMC G15/G1500 Van. Accel, MSD Ignition, and Mallory are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Ignition Wires for your 1974 GMC G15/G1500 Van, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 92 reviews in this category, some of the top rated parts include Wire Set; Super Conductor; Small Block Chevy with L.P. Distributor with 5.0 stars and Wire Set; Street Fire; SBC; Socket Distributor Cap over VC with 2.5 stars.

So if you’re in the market for aftermarket Ignition Wires to keep your 1974 GMC G15/G1500 Van rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Ignition Wires Brands To Make Your 1974 GMC G15/G1500 Van Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1974 GMC G15/G1500 Van demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Wires make up Advance Auto Parts’ inventory, and all are ready to help make your G15/G1500 Van the best it can be. Be sure to browse some of our top Ignition Wires brands and parts.

Popular Mallory Ignition Wires

We carry Mallory parts in our stock across Optional Spark Plug Wires categories, plus more. For a 1974 GMC G15/G1500 Van, our most popular Mallory Ignition Wires include:
Pro Sidewinder Spark Plug Wire Kit
from $125.99
(2)
Pro Sidewinder Spark Plug Wire Kit
Optional Spark Plug Wires

FAQs for 1974 GMC G15/G1500 Van Ignition Wires

What are the most purchased Ignition Wires for the 1974 GMC G15/G1500 Van?

Out of 13 Ignition Wires for the 1974 GMC G15/G1500 Van, the most popular in our inventory are:
Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI
from $133.99
(4)
Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI
Standard Spark Plug Wires
Universal Fit Graphite Suppression; Spark Plug Wire Set
from $128.99
This product is not rated
Universal Fit Graphite Suppression; Spark Plug Wire Set
Optional Spark Plug Wires

What are the top-rated 1974 GMC G15/G1500 Van Ignition Wires?

Top-rated Ignition Wires for your 1974 GMC G15/G1500 Van based on customer reviews/ratings are:
Wire Set; Super Conductor; Small Block Chevy with L.P. Distributor
from $122.99
(2)
Wire Set; Super Conductor; Small Block Chevy with L.P. Distributor
“1972 c10 -383 stroker picked these up with a huge discount (by my own research) – no brainer for that price. connect from hei to accel plugs.come on m”
Wire Set; Street Fire; SBC; Socket Distributor Cap over VC
from $61.99
(2)
Wire Set; Street Fire; SBC; Socket Distributor Cap over VC
“I exchanged the set for the correct set at local store.”