1974 GMC C35/C3500 Pickup Drivetrains
More 1974 GMC C35/C3500 Pickup Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1974 GMC C35/C3500 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1974 GMC C35/C3500 Pickup Drivetrains
Yukon Gear – 10.5" GM 14 Bolt Truck Crush Sleeve (Part No.33108)
from
$7.99
10.5″ GM 14 bolt truck crush sleeve, 1988 & OLDER. Approx 0.825″ long.
Product Features:
See More
Product Features:
- Crush sleeve for 1988 and down GM 10.5″ 14 bolt truck
- 0.825″ tall
Yukon Gear – Mini Spool For GM 10.5" 14 Bolt Truck (Part No.32301)
from
$287.99
Yukon mini spool for GM 10.5″ 14 bolt truck.
Product Features:
See More
Product Features:
- Fits 10.5″ GM 14 bolt truck
- Provides 100% traction to both wheels at all times
- Installs into standard open carrier case
Yukon Gear – Standard Open Carrier Case, GM 10.5" 14 Bolt Truck, 4.10 & Down (Part No.20100)
from
$729.99
Product Features:
See More
- Standard open carrier case
- Fits GM 10.5″ 14 bolt truck
- 4.10 and down ratio only
- Does not include spider gears
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
Yukon Gear – Pinion Install Kit For ’88 And Older 10.5" GM 14 Bolt Truck Differential (Part No.13058)
from
$349.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits 1988 and down GM 10.5″ 14 bolt truck
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
National – Bearings (Part No.N-1211-L)
from
$94.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Dana 60, Dana 70, And Dana 80 Strap Kit (Part No.41194)
from
$31.99
Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 60, 70, 70U, 70HD and 80
- 1480 u-joint size
- Includes two straps and four bolts
Motive Gear – Differential Carrier (Part No.6258340)
National – Bearings (Part No.HM88649)
from
$21.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
National – Multi Purpose Seal (Part No.7412S)
from
$14.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Motive Gear – Differential Gear Install Kit (Part No.GM10.5IK)
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)
from
$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.3780 INCH / 35 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- COMPLETE MOUNT
Yukon Gear – Locking Key / Wedge For Dana 60 & 70 Spindle Nut (Part No.33512)
Yukon Gear – Minor Install Kit For ’87 & Down 10.5" GM 14 Bolt Truck Differential (Part No.12045)
from
$108.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits 1988 and down GM 10.5″ 14 bolt truck
- Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
Yukon Gear – Differential (Part No.26044)
from
$1119.99
Differential
Powertrax – Grip PRO Traction System (Part No.GT436035)
from
$596.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Yukon Gear – Replacement Baffle For Dana 70 & 70HD (Part No.33003)
Yukon Gear – Eaton-Type Positraction Carbon Clutch Kit With 14 Plates For GM 14T And 10.5" (Part No.16112)
from
$304.99
Yukon 1480 Lifetime Series U/Joint. 4.188″ snap ring span, 1.375″ cap diameter. Outside snap ring.
Product Features:
See More
Product Features:
- Clutch kit
- Fits GM 10.5″ 14 bolt truck with Eaton positraction
- Carbon fiber clutches
Felpro – DIFFERENTIAL GASKET (Part No.RDS 6095-1)
from
$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – DiffrlPinSupportBolt (Part No.33582)
from
$5.99
DiffrlPinSupportBolt
Yukon Gear – Standard Open Spider Gear Kit For GM 10.5" And 14T With 30 Spline Axles (Part No.16044)
from
$315.99
Yukon standard open spider gear kit for GM 10.5″ and 14T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits GM 10.5″ 14 bolt truck open differential
- Includes two side gears, four pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
National – Shaft Repair Sleeve (Part No.99125)
from
$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size (Part No.41023)
from
$203.99
Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
Yukon Gear – Replacement Pinion Seal For Dana 44HD, Dana 60 & Dana 70 (Part No.30208)
from
$39.99
Replacement pinion seal for Dana 44HD, Dana 60 & Dana 70 .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion seal
- Pinion seal
- Fits Dana Spicer 44HD, 60, 70, 70U and 70HD
Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)
from
$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 60, 70 and 80
- 3/8″
Popular 1974 GMC C35/C3500 Pickup Drivetrains Categories
1974 GMC C35/C3500 Pickup Drivetrains
You count on your 1974 GMC C35/C3500 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 261 Drivetrains ranging in price from $1.89 to $1,119.99, you’re sure to find everything you need for your 1974 GMC C35/C3500 Pickup.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Valvoline, Moog, and Driveworks. 1974 GMC C35/C3500 Pickup Drivetrains start as low as $1.89!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 11,355 extensive product reviews on 1974 GMC C35/C3500 Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.6 stars and Greaseable Premium Universal Joint with 4.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1974 GMC C35/C3500 Pickup below to get started!
Top-Rated Drivetrains Brands For Your 1974 GMC C35/C3500 Pickup
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1974 GMC C35/C3500 Pickup running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1974 GMC C35/C3500 Pickup back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1974 GMC C35/C3500 Pickup Drivetrains
What are the most purchased Drivetrains for the 1974 GMC C35/C3500 Pickup?
Out of 261 Drivetrains for the 1974 GMC C35/C3500 Pickup, the most popular in our inventory are:
What are the top-rated 1974 GMC C35/C3500 Pickup Drivetrains?
Top-rated Drivetrains for your 1974 GMC C35/C3500 Pickup based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
