1974 Ford Custom 500 Steering and Chassis Parts
More 1974 Ford Custom 500 Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1974 Ford Custom 500, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1974 Ford Custom 500 Steering and Chassis Parts
Rare Parts – Tie Rod Sleeve (Part No.RP25522)
from
$21.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
Powercraft – Steering Gear Complete Rebuild Kit (Part No.8540)
from
$141.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rare Parts – Sway Bar Link Kit (Part No.RP17014)
from
$23.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Driveworks – Suspension Ball Joint (Part No.DW-K8212)
from
$17.99
Driveworks ball joints are made to meet or exceed OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks chassis parts ensure improved steering response and durability.
See More
National – Bearings (Part No.LM67010)
from
$5.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Energy Suspension – Strut Rod Bushing Set (Part No.4.7117R)
from
$31.99
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
Driveworks – Tie Rod End Sleeve (Part No.DW-ES2032S)
from
$10.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Powercraft – Steering Gear Input Shaft Seal Kit (Part No.7095)
from
$30.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Cardone – Power Steering Pump (Part No.20-6878)
from
$66.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Cardone – Power Steering Filter (Part No.20-0012F)
from
$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
National – Multi Purpose Seal (Part No.6835S)
from
$9.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Carquest Premium – Repair Fittings (Part No.35010)
from
$20.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Return Hose Assembly (Part No.35325)
from
$79.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Powercraft – Pump Seal Kit (Part No.8501)
from
$32.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Rare Parts – Tie Rod End (Part No.RP25685)
from
$231.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.
Product Features:
See More
Product Features:
- Greaseable
- Precision machining tolerances
- Heat treated components
- Low friction
Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)
from
$13.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Rare Parts – Track Bar Bushing (Part No.RP22145)
from
$43.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- UV resistant
- No Squeak
Powercraft – Steering Gear Complete Pitman Shaft Seal Kit (Part No.8766)
from
$25.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Lares – New Steering Coupling Assembly (Part No.202)
from
$52.99
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully packaged to insure safe arrival at your door
See More
Rare Parts – Center Link (Part No.RP25816)
from
$138.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Forged steel
- Heat treated components
- Improves steering response
Powercraft – Steering Gear Major Seal Kit (Part No.8532)
from
$47.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
MOOG – Stabilizer Bar Bushing Kit (Part No.K5253)
from
$13.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Imperial – Power Steering Oil Cooler Heavy Duty (Part No.241011)
from
$36.99
3/4″ x 5″ x 9-1/4″ power steering oil cooler heavy duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.
Product Features:
See More
Product Features:
- Heavy-duty power steering oil cooler
- Size: 3/4″ x 5″ x 9-1/4″
- For vehicle with 3/8″ ID power steering return hose
- Removes destructive heat and helps prolong power steering system life
Rare Parts – Idler Arm Bushing (Part No.RP15319)
from
$22.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Reduces wander
- Reduces vibration
- Improves steering response
Driveworks – Sway Bar Link Kits (Part No.DW-K8989)
from
$18.99
Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot with grease relief valve keeps contaminants out
- Performance tested to ensure durability
Lares – Remanufactured Power Steering Gear Box (Part No.806)
from
$376.99
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Popular 1974 Ford Custom 500 Steering and Chassis Parts Categories
1974 Ford Custom 500 Steering and Chassis Parts
You count on your 1974 Ford Custom 500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 75 Steering and Chassis Parts ranging in price from $2.99 to $717.99, you’re sure to find everything you need for your 1974 Ford Custom 500.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 13 different brands like Imperial, Carquest Premium, and Cardone. 1974 Ford Custom 500 Steering and Chassis Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,967 extensive product reviews on 1974 Ford Custom 500 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Bulk – 3/8" I.D. Return Hose J189 with 4.6 stars and New Steering Coupling Assembly with 3.6 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1974 Ford Custom 500 below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1974 Ford Custom 500
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1974 Ford Custom 500 running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Cardone, and even more.
Popular MOOG Steering and Chassis Parts
You’ll find popular MOOG brand products across Tie Rods and Sway Bars. All are waiting to get your 1974 Ford Custom 500 back on the road. Some of the top-rated MOOG products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1974 Ford Custom 500, and some of our most reviewed Imperial parts include:
FAQs for 1974 Ford Custom 500 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1974 Ford Custom 500?
Out of 75 Steering and Chassis Parts for the 1974 Ford Custom 500, the most popular in our inventory are:
from
$7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
What are the top-rated 1974 Ford Custom 500 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1974 Ford Custom 500 based on customer reviews/ratings are:
from
$52.99
(16)
New Steering Coupling Assembly
“Very high quality item. Perfect replacement and fit. Easy to install. Do NOT buy the $10 one. Pay the [$] and you’ll see the high quality fittings and”
from
$62.99
(14)
Pump Complete Rebuild Kit
“No complaints had all seals and o rings needed for the rebuild”
