1974 Dodge Charger Differentials

Name: Dana 60, Dana 70 & Dana 80 Cover Bolt
Brand: Yukon Gear
SKU: 33235
Price: 5.99 USD

Find your specific 1974 Dodge Charger original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1974 Dodge Charger Differentials

from

$5.99

3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:

Cover bolt for Dana Spicer 60, 70 and 80
3/8″

from

$4.99

Product Features:

Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
Fits standard open differentials only

from

$79.99

Seal housing for Dana 60, Zip locker, with o-rings.

Product Features:

Seal housing for Dana Spicer 60
Includes o-rings

from

$249.99

Product Features:

Installation kit
Includes o-ring for bulkhead fitting, bulkhead fitting, outer fitting, switch, front and rear switch cover, solenoid, zip ties and 20′ air line

from

$235.99

Product Features:

Standard open carrier case
Fits 2009 and down Chrysler 9.25″ rear
Does not include spider gears

from

$52.99

Product Features:

MINI INSTALL KIT CHRYSLER 8.75 8 3/4″ EARLY 742 CASE

from

$129.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

Fits Chrysler 8.75″ ’42’ case
Included are a pinion seal, pinion nut, completete shim kit, marking compound and brush.

from

$427.99

Product Features:

Fits Chrysler Dana Spicer 60 with 35 spline axles
4.56 and up ratio only
Provides 100% traction to both wheels at all times
Not recommended for street driven vehicles

from

$7.99

Product Features:

CHRY 8 3/4″ RING GEAR BOLTS C 8.25″

from

$6.99

Product Features:

Oil baffle for Dana Spicer 60 and Dana Spicer 70U

from

$883.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$9.99

Product Features:

Inner oil slinger for Dana Spicer 60

from

$29.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:

Cross pin bolt
Fits Chrylser 7.25″

from

$188.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits M804010 race
All steel construction

from

$13.99

Pinion seal for 8.75″ Chrysler or for 9.25″ Chrysler with 41 or 89 housing.Yukon Mighty seal.

Product Features:

Pinion seal
Fits Chrysler 8.75″ with ’41’ and ’89’ case housings and 2000 and down Chrysler 9.25″

from

$456.99

The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$25.99

Product Features:

Rubber fill plug
Fits Chrysler 7.25″, 8.25″ and 9.25″

from

$549.99

All Spicer ring and pinion gears are designed and tested to meet original equipment specifications. When you purchase genuine Spicer ring and pinion gear sets, you can be confident the ring and pinion set will meet or exceed the exact Dana standards that original equipment manufacturers have relied upon for more than a hundred years.

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$62.99

Differential side bearing screw adjuster for 9.25″ Chrysler.

Product Features:

Side adjuster for Chrysler 9.25″ rear

from

$9.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$271.99

Polished aluminum replacement cover for Dana 60 (standard rotation only).

Product Features:

Fits standard rotation Dana Spicer 60
Finned polished aluminum

from

$13.99

Product Features:

CRUSH SLEEVE CHRYS 8 3/4

from

$12.99

9.25″ pinion gear thrust washer.

Product Features:

Pinion gear thrust washer for Chrysler 9.25″ rear

from

$53.99

Pinion nut for Chrysler 300, CHARGER, MAGNUM.

Product Features:

Pinion nut
Fits Chrysler C198 and C210

from

$955.99

USA Standard Gear Power Lok posi for Chrysler 8.75″, smooth design

Product Features:

Gear Power Lok Posi LSD
Fits Chrysler 8.75″
Smooth design
Positraction

from

$7.99

Dana 60 & Dana 70 Power Lok case bolt.

Product Features:

Power Lok case bolt for Dana Spicer 60 and 70
7/16 x 14 thread
3.5″ long
9/16″ hex head

from

$5.99

Product Features:

Floater roll pin
Fits Dana Spicer 44 and Chrysler 8.75″
Powr Lok positraction only

Popular 1974 Dodge Charger Differentials Categories

Differential Oil

Differential Pinion Yokes

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Pinion Flanges

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Cover Plugs

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Differential Lock Assemblies

Differential Air System Seal Housings

Differential Spools

Differential Carrier Bearings

Differential Carrier Bearing Adjusters

Rear Housing Cover Gaskets

Differential Gear Sets

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Oil Deflectors

Differential Carrier Bolts

Differential Pinion Gear Washers

Differential Spider and Pinion Gear Kits

Differential Clutch Pack Clips

Maybe you’re in the middle of a full rebuild of that 1974 Dodge Charger. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 333 different Differentials in our inventory ranging from $1.99 to $1,487.99. That means you can find the exact parts or products you need to keep that 1974 Dodge Charger running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1974 Dodge Charger. Felpro, Yukon Gear, and Motive Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1974 Dodge Charger, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,720 reviews in this category, some of the top rated parts include Bearings with 4.4 stars and Differential Carrier Gear Kit with 3.7 stars.

So if you’re in the market for aftermarket Differentials to keep your 1974 Dodge Charger rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1974 Dodge Charger Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1974 Dodge Charger demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Charger the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Yukon Gear Differentials

We carry Yukon Gear parts in our stock across Differential Cross Pins categories, plus more. For a 1974 Dodge Charger, our most popular Yukon Gear Differentials include:

from $46.99

(1)

Cross Pin Shaft For Standard Open Chrysler 9.25"

Differential Cross Pins

Top 1974 Dodge Charger Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1974 Dodge Charger. Popular Felpro parts include:

from $9.49

(34)

Differential Cover Gasket

Rear Housing Cover Gaskets

from $6.79

(21)

DIFFERENTIAL GASKET

Rear Differential Cover Gaskets

FAQs for 1974 Dodge Charger Differentials

What are the most purchased Differentials for the 1974 Dodge Charger?

Out of 333 Differentials for the 1974 Dodge Charger, the most popular in our inventory are:

from $44.99

This product is not rated

3 Qt – Penzoil 80W90 Conventional Gear Oil

Differential Oil

from $2.49

This product is not rated

Ring Gear Bolt

Differential Ring Gear Bolts

from $6.99

(6)

Bearings

Differential Bearings

What are the top-rated 1974 Dodge Charger Differentials?

Top-rated Differentials for your 1974 Dodge Charger based on customer reviews/ratings are:

from $15.99

(7)

Bearings

“Comparable with the Timkens I removed. NATIONAL bearings have lasted decades in many of my other machines.”

from $219.99

(6)

Differential Carrier Gear Kit

“Great customer service”

from $7.49

(1)

Differential Pinion Shim Kit

“good product”

1974 Dodge Charger Differentials

More 1974 Dodge Charger Differentials

Essential 1974 Dodge Charger Differentials

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)

Yukon Gear – Zip Locker Install Kit (Part No.34026)

Yukon Gear – Standard Open Carrier Case For ’09 & Down Chrysler 9.25" Rear (Part No.20008)

Motive Gear – Differential Gear Install Kit (Part No.C8.75IKE)

Yukon Gear – Minor Install Kit For Chrysler 42 8.75" Differential (Part No.12006)

USA Standard Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.56 & Up (Part No.59018)

Motive Gear – Ring Gear Bolt (Part No.1304)

Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

Yukon Gear – Replacement Inner Slinger For Dana 60 (Part No.33014)

Yukon Gear – Cross Pin Bolt For 7.25" Chrysler (Part No.33231)

Yukon Gear – Bearing Race Driver (Part No.56021)

Yukon Gear – Pinion Seal For 8.75" Chrysler Or For 9.25" Chrysler With 41 Or 89 Housing (Part No.30121)

Powertrax – Lock Right Locker (Part No.1240-LR)

Yukon Gear – Rubber Fill Plug For Chrysler (Part No.33463)

Spicer – Differential Ring and Pinion (Part No.25127-5X)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Yukon Gear – Differential Side Bearing Screw Adjuster For 9.25" Chrysler (Part No.33256)

Felpro – Differential Cover Gasket (Part No.RDS 55073)

Yukon Gear – Polished Aluminum Replacement Cover For Dana 60 (Part No.32024)

Motive Gear – Differential Crush Sleeve (Part No.3102)

Yukon Gear – 9.25" Pinion Gear Thrust Washer (Part No.33274)

Yukon Gear – Pinion Nut For Chrysler 300, Charger, Magnum (Part No.33170)

USA Standard Gear – Power Lok Positraction for Chrysler 8.75" (Part No.59027)

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Yukon Gear – Replacement Floater Roll Pin For Dana 44 & 8.75" Chrysler Power Lok (Part No.33326)

Popular 1974 Dodge Charger Differentials Categories