1974 Chevrolet Monte Carlo Performance Engines

More 1974 Chevrolet Monte Carlo Performance Engines

Find your specific 1974 Chevrolet Monte Carlo original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1974 Chevrolet Monte Carlo Performance Engines

Edelbrock – Pushrod Set for S/B Chevy (Part No.9629)

Pushrod Set for S/B Chevy

from

$187.99


Product Features:
  • Case-Hardened Tubing
  • Surface Hardening
  • Welded Ends
  • 0.3125 in. Diameter
  • Use with or without Hardened Steel Guideplates
See More
View Product

Edelbrock – Water Pump for Small-Block Chevy Street Rods in Polished Finish (Part No.8892)

Water Pump for Small-Block Chevy Street Rods in Polished Finish

from

$436.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More
View Product

Edelbrock – Sure Seat Valve Springs for Oldsmobile 330-403 V8 1967-1984 (Part No.5812)

Sure Seat Valve Springs for Oldsmobile 330-403 V8 1967-1984

from

$80.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More
View Product

Mr. Gasket – Ultra Seal; Cylinder Head Bolts (Part No.941G)

Ultra Seal; Cylinder Head Bolts

from

$64.99
These grade 8 alloy, longer length bolts allow increased torque and clamping.

Product Features:
  • Cylinder head bolts
  • Longer-than-stock
  • High quality grade 8 alloy
  • Increase torque settings
  • Higher clamp loads on gasket
See More
View Product

Weiand – Hi-Ram; Intake Manifold Top (Part No.1912)

Hi-Ram; Intake Manifold Top

from

$351.99


Product Features:
  • Top Only
See More
View Product

Edelbrock – Torker-Plus Camshaft Kit for 1957-1986 Small-Block Chevy 283-400 V8 (Part No.5002)

Torker-Plus Camshaft Kit for 1957-1986 Small-Block Chevy 283-400 V8

from

$411.99
Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking the guesswork out of camshaft selection. They are compatible with OEM or Edelbrock hydraulic roller tappets which reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance. Designed to work with Torker II manifolds for performance from 2500 to 6500 RPM, these camshafts are ideal for high-performance street, drag or marine applications. Torker-Plus cams have a slightly rough idle and are not suitable for trucks or towing applications. Hydraulic flat tappet lifters are included with each camshaft.

Product Features:
  • Designed for 2500 to 6500 Performance
  • Designed for Hi-Perf Street; Drag or Marine Use
  • Matched to Edelbrock Torker II Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Dyno Matched/Street Proven Performance
  • Take The Guesswork Out Of Camshaft Selection
See More
View Product

Weiand – Supercharger Remote Thermostat Housing (Part No.7134P)

Supercharger Remote Thermostat Housing

from

$164.99


Product Features:
  • Remote Thermostat Housing
See More
View Product

Mr. Gasket – Special Cam Bolt (Part No.944G)

Special Cam Bolt

from

$12.99
Grade 8, single bolt. Black plated finish. The washers are designed to secure the Mr. Gasket cam button pn1180, pn1181, and pn1183 or can be used as stock replacements.

Product Features:
  • Specialty and drive train fastener
  • Special cam bolts
  • Black plated finish
See More
View Product

Mr. Gasket – Intake Manifold Bolts (Part No.957G)

Intake Manifold Bolts

from

$21.99
Choose from grade 5 hex or socket head intake bolts or grade 8 bolts with twelve point smaller-than-standard head and flange, ideal for where space is minimal. Bolts and washers are bright zinc plated for protection and appearance.

Product Features:
  • Grade 8 material
  • Extra thick flat washers
  • Ideal for minimal space
  • 12-pt head and flange
  • Zinc plated for protection
See More
View Product

Mr. Gasket – Precision Timing Tape (Part No.1591)

Precision Timing Tape

from

$15.99
Avoid trouble with this precision timing tape. Use it for accurate timing, setting valve lash or when degreeing the harmonic balancer.

Product Features:
  • Accurate in calibration
  • For hi-performance engines
  • Increased performance
  • Set valve lash at proper time
See More
View Product

Spectre – Engine Dress Steel Up Kit (Part No.54083)

Engine Dress Steel Up Kit

from

$119.99
Spectre’s Engine Dress-Up Kit was designed for the ’58-’86 Chevrolet small block 265-400. This kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stainless steel braided PCV hose with red/blue Magna-Clamps. Designed for use with OE specifications for fit and function, Spectre products are engineered to perform as good as they look.

Product Features:
  • For Chevrolet small block 265 and 400
  • Kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stain
  • Designed for use with OE specifications for fit and function
  • Made from high quality material
See More

(2 reviews)
View Product

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1885)

PERFORMANCE OIL PAN GASKET SET

from

$46.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Rigid core, molded silicone rubber gaskets utilize the one-piece molded rubber technology for a perfect fit, ease of installation and include compression limiters to prevent overtightening.
  • Not intended for use in emission controlled vehicles.
See More
View Product

Mr. Gasket – Throttle Cable Bracket (Part No.9885)

Throttle Cable Bracket

from

$14.99
The throttle cable bracket is designed for small block Chevy engines thru 1979 and is to be used in conjunction with the kick down cable Pn9886 for the Turbo 350 transmission. The throttle cable bracket mounts on the intake manifold and will hold cables with round or square mounts. It has a 2 inch adjustable range and is finished off in a beautiful chrome plating.

Product Features:
  • 2 in. adjustable range
  • Includes necessary hardware
  • Chrome plated
  • Individually packaged
See More
View Product

Mr. Gasket – Ultra Seal; Valve Cover Gasket Set (Part No.5861)

Ultra Seal; Valve Cover Gasket Set

from

$35.99
Creates a positive seal. Controlled swelling gasket. Thickness will not decrease. Eliminates re-torque of valves. High-tensile strength. Handles ex flange pressure and forms a leak proof seal. Black latex coating.

Product Features:
  • Creates a positive seal by controlling swelling
  • Available in extra thick for rocker arm clearance
See More

(2 reviews)
View Product

Mr. Gasket – Water Outlet Gasket (Part No.738G)

Water Outlet Gasket

from

$30.99
Manufactured from a blend of nitrile rubber and fiber for excellent sealing and durability. Precision die cut for application.

Product Features:
  • Edge molded rubber water outlet gasket is reusable
  • Requires no gasket sealer
  • Solid aluminum carrier for strength/rigidity
See More

(6 reviews)
View Product

Edelbrock – RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam (Part No.60759)

RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam

from

$1014.99
Product Features:
  • 50-State Street Legal Aluminum Cylinder Head
  • Out-of-the-Box Bolt-On Performance
  • 70cc Combustion Chambers Improve Performance
  • Retain Stock Compression Ratio
See More
View Product

Edelbrock – Hex-A-Just By Cloyes Adj. True-Roller Timing Chain Set (Part No.7332)

Hex-A-Just By Cloyes Adj. True-Roller Timing Chain Set

from

$123.99


Product Features:
  • Dial-In Your Camshaft With Ease
  • Made From Induction Hardened Billet Steel
  • Solid Bushing Chain Resists Stretching
  • Billet SAE-1144 Steel Crank Sprockets
  • Multiple Keyways
See More
View Product

Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2103)

Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet

from

$334.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

(1 reviews)
View Product

Mr. Gasket – Rear Main Seal Gasket (Part No.29)

Rear Main Seal Gasket

from

$35.99
Made from silicone to withstand extreme engine oil temperatures and injection molded for a precise fit.

Product Features:
  • Made from silicone
  • Withstands extreme engine oil temps
  • Injection molded for a precise fit
See More
View Product

Mr. Gasket – Ultra Seal; Sure-Lock Rocker Arm Nuts (Part No.920G)

Ultra Seal; Sure-Lock Rocker Arm Nuts

from

$59.99
Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Product Features:
  • They are zinc dichromate plated steel
  • They have black oxide coated set screws
  • Keeps rocker arms positively locked
See More
View Product

Edelbrock – Intake Manifold Gasket for 1958-1986 Small-Block Chevy (Part No.7201)

Intake Manifold Gasket for 1958-1986 Small-Block Chevy

from

$26.99


Product Features:
  • Clean Positive Seal
  • Embossed Silicone Bead Surrounding The Port
  • Matched To Manifolds And Cylinder Heads
See More

(12 reviews)
View Product

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 3 Piece Set (Part No.1202)

Lower Intake Manifold Gasket Set: 3 Piece Set

from

$34.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More
View Product

Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Chevrolet (Part No.7361)

Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Chevrolet

from

$128.99
Product Features:
  • Provides excellent sealing and conformability
  • Releases+N747 clean without sticking, if the engine needs to be disassembled
  • Perfect companion for Edelbrock cylinder heads and intake manifolds
  • Does not include end seals
  • Use of a silicone sealant in place of end seal is recommended
See More
View Product

Mr. Gasket – Ultra Seal; Head Gasket (Part No.5801G)

Ultra Seal; Head Gasket

from

$61.99
Excellent resilience. High temperature endurance. Will not creep or cold-flow. Will not get brittle. Resists corrosion. Eliminates gasket sealer. Compatible with high octane and exotic fuel.

Product Features:
  • Excellent resilience
  • High temperature endurance
  • Will not creep/cold-flow
  • Will not get brittle
  • Resists corrosion
  • Eliminates gasket sealer
  • Compatible w/high octane fuel
  • Compatible with exotic fuel
See More
View Product

B & M – Torque Converter, Holeshot 3000 (Part No.70421)

Torque Converter, Holeshot 3000

from

$717.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More
View Product

B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

Torque Converter, Nitrous Holeshot 3600

from

$563.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 3400-3800 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More
View Product

Mr. Gasket – Timing Cover Seal (Part No.18)

Timing Cover Seal

from

$16.99
Mr. Gasket manufactures a variety of performance parts and accessories, including carburetor and fuel accessories, cooling system accessories, engine components, fasteners, gaskets, and suspension and drive line components. Besides gaskets and fasteners, the Mr. Gasket brand provides a variety of performance and racing products for all parts of your vehicle including: carburetor and fuel accessories, chrome-plated accessories, cooling system accessories, engine components, ignition and electrical accessories, shifter accessories, specialty tools and suspension and driveline components. Mr .Gasket also includes Ultra-Seal gaskets and fasteners.

Product Features:
  • Nitrile rubber and high density cork
  • Will not shrink or stick
See More
View Product

Mr. Gasket – Timing Cover Gasket Set (Part No.90)

Timing Cover Gasket Set

from

$21.99
Made from high grade cork granules and a neoprene binder, these gaskets will not shrink or stick and provide excellent sealing and durability. These gaskets can be reused.

Product Features:
  • Will not shrink or stick
  • Provides excellent sealing and durability
  • Reusable
See More
View Product

Popular 1974 Chevrolet Monte Carlo Performance Engines Categories

Performance Intake Manifolds
Performance Intake Manifolds
Performance Water Outlet Gaskets
Performance Water Outlet Gaskets
Performance Engine Dress-Up Kits
Performance Engine Dress-Up Kits
Performance Engine Water Pumps
Performance Engine Water Pumps
Performance Water Outlets
Performance Water Outlets
Performance Engine Cylinder Head Gaskets
Performance Engine Cylinder Head Gaskets
Performance Engine Camshaft and Lifter Kits
Performance Engine Camshaft and Lifter Kits
Performance Engine Harmonic Balancers
Performance Engine Harmonic Balancers
Performance Engine Intake Manifold Gaskets
Performance Engine Intake Manifold Gaskets
Performance Engine Timing Sets and Components
Performance Engine Timing Sets and Components
Performance Engine Valve Springs
Performance Engine Valve Springs
Performance Engine Valve Cover Gasket Sets
Performance Engine Valve Cover Gasket Sets
Performance Camshaft and Lifter Kits
Performance Camshaft and Lifter Kits
Performance Engine Rocker Arms
Performance Engine Rocker Arms
Performance Engine Oil Pan Gaskets
Performance Engine Oil Pan Gaskets
Performance Intake Manifold Hardware
Performance Intake Manifold Hardware
Performance Engine Main Bearing Gasket Sets
Performance Engine Main Bearing Gasket Sets
Performance Engine Cylinder Head Bolts
Performance Engine Cylinder Head Bolts
Performance Engine Timing Cover Gasket Sets
Performance Engine Timing Cover Gasket Sets
Performance Engine Push Rods
Performance Engine Push Rods
Performance Engine Cylinder Heads
Performance Engine Cylinder Heads
Performance Torque Converters
Performance Torque Converters
Performance Engine Camshaft Bolts
Performance Engine Camshaft Bolts
Performance Accelerator Cables
Performance Accelerator Cables

1974 Chevrolet Monte Carlo Performance Engines

Maybe you’re in the middle of a full rebuild of that 1974 Chevrolet Monte Carlo. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 115 different Performance Engines in our inventory ranging from $12.99 to $1,268.99. That means you can find the exact parts or products you need to keep that 1974 Chevrolet Monte Carlo running smoothly.

Performance Engines are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1974 Chevrolet Monte Carlo. Mr. Gasket, FEL-PRO Performance, and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1974 Chevrolet Monte Carlo, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 630 reviews in this category, some of the top rated parts include Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish with 5.0 stars and Action Plus Water Pumps with 3.7 stars.

So if you’re in the market for aftermarket Performance Engines to keep your 1974 Chevrolet Monte Carlo rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1974 Chevrolet Monte Carlo Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1974 Chevrolet Monte Carlo demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your Monte Carlo the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular FEL-PRO Performance Performance Engines

We carry FEL-PRO Performance parts in our stock across Performance Engine Cylinder Head Gaskets categories, plus more. For a 1974 Chevrolet Monte Carlo, our most popular FEL-PRO Performance Performance Engines include:
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
from $62.99
(1)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
Performance Engine Cylinder Head Gaskets
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
from $52.99
(1)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
Performance Engine Cylinder Head Gaskets
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
from $39.49
(1)
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
Performance Engine Cylinder Head Gaskets

Top 1974 Chevrolet Monte Carlo Performance Engines from Mr. Gasket

Mr. Gasket products are another trusted brand when it comes to Performance Engines for your 1974 Chevrolet Monte Carlo. Popular Mr. Gasket parts include:
Ultra Seal; Valve Cover Gasket Set
from $25.99
(7)
Ultra Seal; Valve Cover Gasket Set
Performance Engine Valve Cover Gasket Sets
Water Outlet Gasket
from $30.99
(6)
Water Outlet Gasket
Performance Water Outlet Gaskets
Intake Manifold Bolts
from $29.99
(5)
Intake Manifold Bolts
Performance Intake Manifolds

FAQs for 1974 Chevrolet Monte Carlo Performance Engines

What are the most purchased Performance Engines for the 1974 Chevrolet Monte Carlo?

Out of 115 Performance Engines for the 1974 Chevrolet Monte Carlo, the most popular in our inventory are:
Intake Manifold Gasket for 1958-1986 Small-Block Chevy
from $26.99
(12)
Intake Manifold Gasket for 1958-1986 Small-Block Chevy
Performance Engine Intake Manifold Gaskets
Lower Intake Manifold Gasket Set: 9 Piece Set
from $27.49
This product is not rated
Lower Intake Manifold Gasket Set: 9 Piece Set
Performance Engine Intake Manifold Gaskets
Ultra Seal; Valve Cover Gasket Set
from $35.99
(2)
Ultra Seal; Valve Cover Gasket Set
Performance Engine Valve Cover Gasket Sets

What are the top-rated 1974 Chevrolet Monte Carlo Performance Engines?

Top-rated Performance Engines for your 1974 Chevrolet Monte Carlo based on customer reviews/ratings are:
Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish
from $257.99
(3)
Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish
“Get the matching carb, increased HP by 50 points”
Action Plus Water Pumps
from $215.99
(3)
Action Plus Water Pumps
“I bought this item for my 1979 Camaro SBC for Street/Strip application. Water pump weighs 4 LBS less than factory, comes with its own cork gaskets. N”
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
from $60.99
(2)
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
“Used with the smallest Comp Thumpr Cam, good to 5500 RPM, Cost is great, No valve float. I would use again with a samll to medium cam and 416 heads.”

More Popular Parts for All Makes