1974 Chevrolet Chevelle Distributors

Essential 1974 Chevrolet Chevelle Distributors

Mr. Gasket – Hei Advance Curve Kit (Part No.929G)

Hei Advance Curve Kit

from

$16.49
One of the best, and sometimes missed tuning tricks is not to just optimize your initial timing, but to bring in timing advance more quickly than the stock distributor can allow. Bringing timing more quickly than stock can provide substantial increases in both torque and horsepower depending on your combination.This is done by changing the springs under the cap. This kit includes three sets of springs which can be used in different combinations to provide full advance sooner than stock. Use lighter springs to bring the advance more quickly, and heavier springs to bring it in more slowly. Two new weights with nylon bushings are also included as are instructions to help with installation. Springs are color code as follows: Light Springs – Black Medium Springs – Silver Heavy Springs – Gold

Product Features:
  • Brings in timing more quickly than stock for more torque and horsepower
  • Includes three sets of springs to allow for a wider range of custom tuning
  • Instructions included to help with installation
See More

Carquest Premium – Distributor Rotor (Part No.DAA1004)

Distributor Rotor

from

$6.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Distributor Rotor (Part No.D157)

Distributor Rotor

from

$13.05
BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:
  • High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
  • The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze.  The housing is fabricated using polyamide resins.  All of the materials together provide the connectors with prolonged life and superior performance.
  • All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
  • Offering thousands of high-quality pigtails & sockets for nearly every electrical job
  • Noise-suppressing coating on segment prevents electrical interference with radio and other electronic circuits
See More

Carquest – Distributor Rotor (Part No.23A1006)

Distributor Rotor

from

$7.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

PerTronix – D4051 Flame-Thrower HEI Distributor Cap Red (Part No.D4051)

D4051 Flame-Thrower HEI Distributor Cap Red

from

$37.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:
  • Made from hi-performance 60 KV rated alkyd molding compound.
  • Cap and rotor kits include nylon rotor hold-down screws.
  • Flame-Thrower dust covers provide a larger air gap around the coil.
See More

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1787)

Distributor Cap and Rotor Kit

from

$15.99
Distributor Cap and Rotor Kit

PerTronix – D4002 Flame-Thrower HEI Distributor Cap and Rotor Kit Blue (Part No.D4002)

D4002 Flame-Thrower HEI Distributor Cap and Rotor Kit Blue

from

$42.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:
  • Made from hi-performance 60 KV rated alkyd molding compound.
  • Cap and rotor kits include nylon rotor hold-down screws.
  • Flame-Thrower dust covers provide a larger air gap around the coil.
See More

Edelbrock – KIT PARTS (Part No.4802)

KIT PARTS

from

$13.99
KIT PARTS

Carquest Premium – Distributor T1835: 100% New, With Cap and Rotor (Part No.T1835)

Distributor T1835: 100% New, With Cap and Rotor

from

$129.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100710)

Flame-Thrower Electronic Distributor Billet

from

$364.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance

Product Features:
  • PerTronix D100710 Flame-Thrower Electronic Distributor Billet Chevrolet Small Block/Big Block Plug and Play with Ignitor II Technology Vacuum Advance Black Male Cap
  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
See More

MSD Ignition – Distributor; Crank Trigger; Chevy V8 Low Profile (Part No.84697)

Distributor; Crank Trigger; Chevy V8 Low Profile

from

$384.99
The unique design of these distributors fit tight intake systems while still transferring the high voltage of the MSD racing ignition to the spark plugs. The high voltage carrying capabilities are the result of several features which have been designed to fit the tight quarters and still accurately deliver sparks.

Product Features:
  • Designed to fit low in the block to clear firewall/intake combos
  • Supplied w/Bronze Gear
  • Supplied w/Large Diameter HEI Style Distributor Cap And Rotor
  • Must Be Used w/An MSD Crank Trigger And MSD Ignition Control
  • O-ring seals can be installed for oil press. control (Mods only)
  • Special oil tract improves lubrication to the dist./cam gear
  • QPQ coated polished steel shaft; guided by sealed ball bearings
  • Oversized Polished Steel Shaft w/QPQ Coating
See More

MSD Ignition – Vacuum Advance Lockout; PN 8360; PN 8361; PN 8572 (Part No.8468)

Vacuum Advance Lockout; PN 8360; PN 8361; PN 8572

from

$14.49
This bracket allows you to easily remove the vacuum advance from MSD distributors that are CW rotation (except PN 8365 and PN 8362).

Product Features:
  • Vacuum Advance Lockout
  • Distributor Accessories
  • For Use On PN[8360/8361/8572]
  • Size Can Be Used w/Distributor PN[8360/8361/8572]
See More

MSD Ignition – Vacuum Advance Mechanism (PN 8460/PN 8461) (Part No.8463)

Vacuum Advance Mechanism (PN 8460/PN 8461)

from

$36.49
This is the replacement canister for MSD distributors equipped with vacuum advance (except the PN 8365 and PN 8362 HEI distributors.)

Product Features:
  • Replacement Canister
  • Vacuum Advance Mechanism
  • For Replacement On PN[8460/8461]
  • Size Replacement Canister For Distributor PN[8360/8361]
See More

PerTronix – D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit (Part No.D9011)

D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit

from

$10.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:
  • PerTronix D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit
  • These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
See More

Felpro – DISTRIBUTOR MOUNTING GASKET (Part No.70194)

DISTRIBUTOR MOUNTING GASKET

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Carquest Premium – Distributor Cap Carbon Button (Part No.CAA1216)

Distributor Cap Carbon Button

from

$9.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor Cap Cover (Part No.CAC1073)

Distributor Cap Cover

from

$17.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Ignition Distributor Cover (Part No.1875960X)

Ignition Distributor Cover

from

$19.49
ACDelco Professional Distributor Cap Cover is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cover is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest – Distributor Cap Cover (Part No.C185)

Distributor Cap Cover

from

$18.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • BWD SELECT® caps have solid brass terminals for better conductivity and greater resistance to electrical pitting and erosion for a longer service life
  • The BWD SELECT® exceed the original performance. The benefit is greater customer confidence.
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

MSD Ignition – Distributor Gear; MSD Chevy Distributor; .500 ID; Iron (Part No.8531)

Distributor Gear; MSD Chevy Distributor; .500 ID; Iron

from

$54.39
This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Micro Polished Surface For Smooth Contact
  • Proprietary formulated ductile iron.
  • Melonite QPQ coated reduces friction and initial wear
  • Interstitial carbide improves wear resistance/running properties
See More

1974 Chevrolet Chevelle Distributors

Maybe you’re in the middle of a full rebuild of that 1974 Chevrolet Chevelle. Maybe you just need a couple of Distributors. Either way, Advance Auto Parts has 64 different Distributors in our inventory ranging from $2.29 to $437.99. That means you can find the exact parts or products you need to keep that 1974 Chevrolet Chevelle running smoothly.

Distributors are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1974 Chevrolet Chevelle. Carquest, ACDelco, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Distributors for your 1974 Chevrolet Chevelle, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 77 reviews in this category, some of the top rated parts include Distributor Cap with 4.0 stars and Hei Advance Curve Kit with 3.8 stars.

So if you’re in the market for aftermarket Distributors to keep your 1974 Chevrolet Chevelle rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Distributors Brands To Make Your 1974 Chevrolet Chevelle Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1974 Chevrolet Chevelle demands trusted brand parts and products to keep it running. Many trusted brands of Distributors make up Advance Auto Parts’ inventory, and all are ready to help make your Chevelle the best it can be. Be sure to browse some of our top Distributors brands and parts.

Popular Felpro Distributors

We carry Felpro parts in our stock across Distributor Mount Gaskets categories, plus more. For a 1974 Chevrolet Chevelle, our most popular Felpro Distributors include:
DISTRIBUTOR MOUNTING GASKET
from $2.29
(5)
DISTRIBUTOR MOUNTING GASKET
Distributor Mount Gaskets

FAQs for 1974 Chevrolet Chevelle Distributors

What are the most purchased Distributors for the 1974 Chevrolet Chevelle?

Out of 64 Distributors for the 1974 Chevrolet Chevelle, the most popular in our inventory are:
Distributor Rotor
from $16.49
(12)
Distributor Rotor
Distributor Rotor Buttons
Ignition Distributor Cap
from $26.49
(11)
Ignition Distributor Cap
Distributor Cap Kits
Distributor Rotor
from $7.05
(5)
Distributor Rotor
Distributor Rotor Buttons

What are the top-rated 1974 Chevrolet Chevelle Distributors?

Top-rated Distributors for your 1974 Chevrolet Chevelle based on customer reviews/ratings are:
Distributor Cap
from $18.05
(9)
Distributor Cap
“1966 Pontiac 389”
Hei Advance Curve Kit
from $16.49
(4)
Hei Advance Curve Kit
“Used on 78 Corvette stock distributor on L48 350. Used gold springs and clockwise fit. Set timing to 36 degrees at 2500 rpm. Seems to be running great”
Distributor Rotor
from $13.05
(3)
Distributor Rotor
“Good quality”