1973 Volvo 142 Drivetrains
More 1973 Volvo 142 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1973 Volvo 142, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1973 Volvo 142 Drivetrains
Yukon Gear – Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50 (Part No.33002)
from
$4.99
Product Features:
See More
- Oil baffle for Dana Spicer 30, Dana Spicer 44 IFS, Dana Spicer 50, AMC Model 35 IFS
USA Standard Gear – Open Spider Gear Set For Dana Spicer 30, 27 Spline (Part No.39005)
from
$151.99
Product Features:
See More
- Spider gear kit
- Fits Dana Spicer 30 27 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)
from
$182.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits Dana Spicer 25, 27, 30, 4 and 50
SKF – Wheel Bearing (Part No.K8000390037SKF)
from
$54.25
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.
Product Features:
See More
Product Features:
- Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
- 100% tested to the actual OE specifications per part number for fit, form and function
- High quality steel and surface finishes
- Proper implementation of heat treatment
Yukon Gear – Dana 30 Side Gear Thrust Washer (Part No.33284)
from
$10.99
Dana 25, Dana 27, & Dana 30 side gear Thrust washer.
Product Features:
See More
Product Features:
- Side gear thrust washer for Dana Spicer 25, 27, 30 and AMC Model 35
- 1.560″ I.D.
- Fits standard open differentials only
Yukon Gear – Replacement Pinion Nut For Dana 25, 27, 30, 36, 44, 53 & GM 7.75" (Part No.33143)
from
$6.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Pinion nut for Dana Spicer 25, 27, 30, 44, 50 and GM 7.75″
- 3/4″ x 16 thread
SKF – Wheel Seal (Part No.K8010285798SKF)
from
$39.23
Wheel Seal
Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)
Yukon Gear – Bearing Race Driver (Part No.56015)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM88610 race
- All steel construction
Yukon Gear – Air Line Repair Kit, Zip Locker (Part No.34003)
from
$52.99
Air line repair kit, ZIP locker.
Product Features:
See More
Product Features:
- Air line repair kit
- Includes 20′ air line and two repair fittings
Yukon Gear – O-Ring For Dana 30 & Model 35 Zip Locker Seal Housing (Part No.34005)
Driveworks – Taper Bearing Cup (Part No.S-LM-501314)
from
$7.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)
from
$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.
Product Features:
See More
Product Features:
- Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
Yukon Gear – Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24 (Part No.33038)
from
$11.99
Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8″ x 24.
Product Features:
See More
Product Features:
- Ring gear bolt for Dana Spicer 25, 27, 30, 44 and AMC Model 35
- 3/8″ x 24 thread
Yukon Gear – High Performance Ring & Pinion Replacement Gear Set For Dana 30 In A 3.73 Ratio (Part No.24019)
from
$469.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 30 without crush sleeve
- 7.20″ ring gear diameter
- 26 spline pinion
- 10 ring gear bolts
- 3.73 ratio
National – Bearings (Part No.A-6)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Differential Pinion Yoke Assembly (Part No.697-542)
from
$111.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
- Effective fix – replacement restores proper connection between drive shaft and differential
- Rigorously tested – designed and evaluated to assure safe, reliable operation
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Yukon Gear – Replacement Shim Kit For Dana 30, Front & Rear, Also D36Ica & Dana 44Ica (Part No.55023)
from
$86.99
Replacement shim kit for Dana 30, front & rear, also D36ICA & Dana 44ICA.
Product Features:
See More
Product Features:
- Complete shim kit for Dana Spicer 30 front and rear, also Dana Spicer 36
Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R30FRMK)
from
$99.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- D30F MASTER BEARING SEAL & GASKET S 66-90
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.369)
from
$19.99
Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MTC – Driveshaft Support Washer (Part No.K105294653MTC)
from
$1.63
The MTC Driveshaft Support Washer is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
National – Bearings (Part No.HM88649)
from
$21.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Set Up Bearing (Part No.56036)
from
$172.99
Set-up carrier bearing kit (2 bearings, no races) LM501349. No return.
Product Features:
See More
Product Features:
- Set up bearing kit
- Fits Dana Spicer 30
- Easily slips on and off carrier journals to allow for easier carrier shim adjustment
Yukon Gear – Replacement Cover Gasket For Dana 30 (Part No.23003)
Yukon Gear – Replacement Yoke For Dana 30, 44, 50, And 300 With 26 Spline And A 1310 U/Joint Size (Part No.41018)
from
$121.99
Yukon replacement yoke for Dana 30, 44, 50, and Dana 300 with 26 spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44
- 26 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – Minor Install Kit For Dana 30 Rear Differential (Part No.12014)
from
$135.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 rear
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Popular 1973 Volvo 142 Drivetrains Categories
1973 Volvo 142 Drivetrains
You count on your 1973 Volvo 142 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 122 Drivetrains ranging in price from $1.63 to $1,303.99, you’re sure to find everything you need for your 1973 Volvo 142.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 16 different brands like Valvoline, Driveworks, and National. 1973 Volvo 142 Drivetrains start as low as $1.63!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 4,814 extensive product reviews on 1973 Volvo 142 Drivetrains. Some of the top-rated Drivetrains products we carry are Shaft Repair Sleeve with 4.0 stars and Taper Bearing Cone with 3.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1973 Volvo 142 below to get started!
Top-Rated Drivetrains Brands For Your 1973 Volvo 142
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1973 Volvo 142 running right for years to come. In our inventory you’ll find brands like Valvoline, Driveworks, National, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1973 Volvo 142 back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1973 Volvo 142 Drivetrains
What are the most purchased Drivetrains for the 1973 Volvo 142?
Out of 122 Drivetrains for the 1973 Volvo 142, the most popular in our inventory are:
What are the top-rated 1973 Volvo 142 Drivetrains?
Top-rated Drivetrains for your 1973 Volvo 142 based on customer reviews/ratings are:
from
$41.49
(2)
Shaft Repair Sleeve
“Used this to repair a camshaft sealing surface on a 2000 Sienna. it worked incredibly well and was easy to use. My first time using a repair sleeve ”
