1973 Plymouth Roadrunner Performance Exhaust Products
More 1973 Plymouth Roadrunner Performance Exhaust Products
Find your specific 1973 Plymouth Roadrunner original or aftermarket Performance Exhaust Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1973 Plymouth Roadrunner Performance Exhaust Products
Flowtech – Ceramic Header (Part No.33130FLT)
from
$615.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Flowtech – Standard Header (Part No.13130FLT)
from
$324.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Flowtech – Ceramic Header (Part No.33100FLT)
from
$578.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Rear Exit – Pair (Part No.15806)
from
$226.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1413)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5938)
from
$48.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Flowtech – Header Gasket Set (Part No.99361FLT)
from
$18.59
Header Gasket Set
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5936)
from
$38.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Has A Steel Core With Graphite Facing
- Graphite Facing Has Excellent Thermo-conductivity
- Coated With High Temp Silicone For Sealing
- Will Not (brindle ) Or Indent Aluminum Heads
Mr. Gasket – Exhaust Gasket Set (Part No.353)
from
$30.99
Mr. Gasket Performance Exhaust Gaskets are manufactured from high-temperature composite material. They provides maximum torque retention to eliminate gasket failure. Precision die cut for an excellent fit, but can be trimmed if necessary for modified port applications. For OE replacement, high-performance street, drag race and oval track. Rectangular Ports, 1.00 inch x 1.64 inch
Product Features:
See More
Product Features:
- Manufactured from high-temperature acrylic blend exhaust material
- Provides excellent sealing and durability
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Precision Die Cut For Excellent Fit
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1414)
from
$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Hooker Headers – Super Competition Header Gasket (Part No.10838HKR)
from
$19.99
Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.
Product Features:
See More
Product Features:
- Tear Resistant
- Precisely Cut To Match Header
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1432)
from
$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.942451)
from
$154.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942446)
from
$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842446)
from
$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.842451)
from
$175.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.8042441)
from
$123.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Mr. Gasket – Header Bolts (Part No.976)
from
$22.49
When installing headers you will need header bolts, factory exhaust manifold bolts won’t work. These Mr. Gasket Header Bolts are Grade 5 for strength, black oxide coated, and have a compact hex head that is ideal for use where space is minimal – your typical header flanges. Sold as a set of 14.
Product Features:
See More
Product Features:
- 14 per Package
- Heat-Treated For Strength
- Ideal For Tight Spaces
- Grade 5 Material
- Protective Black Finish
Popular 1973 Plymouth Roadrunner Performance Exhaust Products Categories
1973 Plymouth Roadrunner Performance Exhaust Products
Maybe you’re in the middle of a full rebuild of that 1973 Plymouth Roadrunner. Maybe you just need a couple of Performance Exhaust Products. Either way, Advance Auto Parts has 17 different Performance Exhaust Products in our inventory ranging from $18.59 to $615.99. That means you can find the exact parts or products you need to keep that 1973 Plymouth Roadrunner running smoothly.
Performance Exhaust Products are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1973 Plymouth Roadrunner. FEL-PRO Performance, Flowtech, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Exhaust Products for your 1973 Plymouth Roadrunner, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 52 reviews in this category, some of the top rated parts include Ceramic Header with 4.7 stars and Ceramic Header with 4.0 stars.
So if you’re in the market for aftermarket Performance Exhaust Products to keep your 1973 Plymouth Roadrunner rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Exhaust Products Brands To Make Your 1973 Plymouth Roadrunner Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1973 Plymouth Roadrunner demands trusted brand parts and products to keep it running. Many trusted brands of Performance Exhaust Products make up Advance Auto Parts’ inventory, and all are ready to help make your Roadrunner the best it can be. Be sure to browse some of our top Performance Exhaust Products brands and parts.
Popular Flowmaster Inc. Performance Exhaust Products
We carry Flowmaster Inc. parts in our stock across Performance Exhaust Tail Pipes and Performance Exhaust Mufflers categories, plus more. For a 1973 Plymouth Roadrunner, our most popular Flowmaster Inc. Performance Exhaust Products include:
from
$126.99
(1)
Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
from
$113.99
(3)
Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
FAQs for 1973 Plymouth Roadrunner Performance Exhaust Products
What are the most purchased Performance Exhaust Products for the 1973 Plymouth Roadrunner?
Out of 17 Performance Exhaust Products for the 1973 Plymouth Roadrunner, the most popular in our inventory are:
from
$31.49
This product is not rated
Exhaust Manifold Gasket Set
Performance Exhaust Manifold Gaskets
from
$19.99
This product is not rated
Super Competition Header Gasket
Performance Exhaust Manifold Gaskets
What are the top-rated 1973 Plymouth Roadrunner Performance Exhaust Products?
Top-rated Performance Exhaust Products for your 1973 Plymouth Roadrunner based on customer reviews/ratings are:
from
$578.99
(3)
Ceramic Header
“includes all gaskets and hrdware/ good fit inside tight areas of charger/ ceramic looks great hope it lasts.”
from
$615.99
(1)
Ceramic Header
“pretty easy install. Had to dimple tube on #7 to clear clutch bar. #4 tube rests against inner fender.couple spark plug boots against tubes.”
