1973 Oldsmobile Delta 88 Distributors
More 1973 Oldsmobile Delta 88 Distributors
Find your specific 1973 Oldsmobile Delta 88 original or aftermarket Distributors below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1973 Oldsmobile Delta 88 Distributors
MSD Ignition – Vacuum Advance Mechanism (PN 8460/PN 8461) (Part No.8463)
from
$36.49
This is the replacement canister for MSD distributors equipped with vacuum advance (except the PN 8365 and PN 8362 HEI distributors.)
Product Features:
See More
Product Features:
- Replacement Canister
- Vacuum Advance Mechanism
- For Replacement On PN[8460/8461]
- Size Replacement Canister For Distributor PN[8360/8361]
PerTronix – D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister (Part No.D9006)
from
$30.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.
Product Features:
See More
Product Features:
- PerTronix D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister
- These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
Carquest Premium – Distributor Vacuum Advance (Part No.VBC1077)
from
$20.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Distributor Vacuum Advance (Part No.VBC1036)
from
$29.99
The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Distributor Vacuum Advance (Part No.VBC1099)
from
$29.99
The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Distributor Rotor (Part No.DAA1004)
from
$6.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Distributor Rotor (Part No.23A1019)
from
$5.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- High-quality products that meet OE appearance and performance to
Forecast – Forecast Distributor Rotor (Part No.F2020326365FOR)
from
$11.53
Forecast Distributor Caps and Rotors are made from top quality materials throughout to ensure high performance and long product life.
Product Features:
See More
Product Features:
- Superior Surface Finish
- RFI Resistors (Asian) / RFI Suppression (European)
- Installation Screws
- Precision-machined Contacts
- Finely -tooled Metal Mounting Sleeve (Asian)
Carquest Premium – Distributor Rotor (Part No.DAA1001)
from
$9.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Driveworks – Distributor Rotor (Part No.23045)
from
$11.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
MSD Ignition – Distributor; Chevy V8; Billet with Vacuum Advance (Part No.8361)
from
$399.99
The street Pro-Billet is a popular route for people looking for proven race performance for their street cars. A vacuum advance canister provides economy and the proven MSD mechanical advance gives you the opportunity to dial-in a timing curve to fit your needs. Inside, an oversized steel shaft is QPQ coated for low friction and rides in a sealed ball bearing at the top of the distributor with an extra-long sintered bushing at the bottom. This combination keeps the shaft steady creating accurate spark delivery at any RPM. The street Pro-Billet relies on a magnetic pick-up to trigger the MSD Ignition control which delivers the powerful sparks to the coil. This pick-up is extremely accurate and never needs adjusting.
Product Features:
See More
Product Features:
- Designed for street/performance use w/mechanical or vacuum adv.
- Must Be Used w/An MSD Ignition Control
- Supplied w/An HEI Style Distributor Cap And Rotor
- Accepts Cap-A-Dapts
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
PerTronix – D7110700 Flame-Thrower Electronic Distributor Billet Oldsmobilemobile V8 with Ignitor III Vacuum Advance Black Cap (Part No.D7110700)
from
$414.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our I3 billet distributors ship with the all NEW Ignitor III multi-spark rev limiting modules. Replace your outdated points, electronic distributor
Product Features:
See More
Product Features:
- PerTronix D7110700 Flame-Thrower Electronic Distributor Billet Oldsmobilemobile V8 with Ignitor III Vacuum Advance Black Cap
- Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford
Mallory – Unilite Dist. Oldsmobile 330-455 (Part No.3763401)
from
$538.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D110700)
from
$367.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance
Product Features:
See More
Product Features:
- PerTronix D110700 Flame-Thrower Electronic Distributor Billet Oldsmobile V8 Plug and Play with Ignitor II Technology Vacuum Advance Black Cap
- Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
PerTronix – D1170 Flame-Thrower Race Distributor HEI Oldsmobile V8 Black Cap (Part No.D1170)
from
$397.99
Flame Thrower Street/Strip distributors have a speciall Flame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM.
Product Features:
See More
Product Features:
- New lightweight A384 cast aluminum alloy housing.
- Aligned and honed high quality bronze sintered bushings for reduced friction and extended life.
- Centerless ground corrosion resistant shaft reduces friction and provides concentric operation.
- RACE ONLY 7.2 amp module and 50,000 volt coil.
- Distributor gear is ground to exact tolerances for tighter mesh with cam. (Bronze distributor gear available)
PerTronix – D1102 Flame-Thrower Distributor HEI Oldsmobile V8 Blue Cap (Part No.D1102)
from
$328.99
STREET / STRIP HEI distributorsOur HEI distributors are built from the ground up with all new components. We have engineered a special high energy module and coil combination that operates without misfires beyond 7500 RPM. That’s nearly 3000 RPM higher t
Product Features:
See More
Product Features:
- PerTronix D1102 Flame-Thrower Distributor HEI Oldsmobile V8 Blue Cap
- New lightweight aluminum alloy housing.
Carquest Premium – Distributor Primary Lead Wire (Part No.DLA1138)
from
$9.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
MSD Ignition – Distributor Cap; Extreme Output; GM HEI (Part No.84111)
from
$79.99
With the introduction of our 20 Amp extreme HEI module, we needed an HEI cap and rotor that could withstand the high output. The answer was to mold our own HEI cap, rotor and coil cover. The cap and rotor will fit our HEI Pro-Billet distributor, PN 8365.
Product Features:
See More
Product Features:
- Designed w/performance in mind
- High quality; voltage insulating material
- Stainless Terminals
- High dielectric properties
Carquest – Distributor Cap (Part No.C158)
from
$18.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.
Product Features:
See More
Product Features:
- Distributor cap uses glass-filled polyester resin with dielectric strength as high as 630 volts per mil, for optimum performance.
- Distributor cap has aluminum terminals to match OE performance.
- The BWD SELECT® exceed the original performance. The benefit is greater customer confidence.
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Distributor Cap (Part No.CAE1055)
from
$19.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
PerTronix – D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black (Part No.D4000)
from
$41.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.
Product Features:
See More
Product Features:
- Made from hi-performance 60 KV rated alkyd molding compound.
- Cap and rotor kits include nylon rotor hold-down screws.
- Flame-Thrower dust covers provide a larger air gap around the coil.
Driveworks – Distributor Cap (Part No.24052)
from
$17.05
Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Carquest Premium – Distributor Cap (Part No.CAE1058)
from
$16.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Distributor Cap (Part No.24E1027)
from
$15.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- High-quality products that meet OE appearance and performance to
Carquest – Distributor Cap (Part No.24E1007)
from
$15.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- High-quality products that meet OE appearance and performance to
Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1983)
from
$30.49
Distributor Cap and Rotor Kit
ACDelco – Ignition Distributor Cap (Part No.D336X)
from
$26.49
ACDelco Professional Distributor Cap is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cap is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest – Distributor Cap (Part No.24E1023)
from
$9.79
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- High-quality products that meet OE appearance and performance to
Popular 1973 Oldsmobile Delta 88 Distributors Categories
1973 Oldsmobile Delta 88 Distributors
Maybe you’re in the middle of a full rebuild of that 1973 Oldsmobile Delta 88. Maybe you just need a couple of Distributors. Either way, Advance Auto Parts has 31 different Distributors in our inventory ranging from $5.49 to $538.99. That means you can find the exact parts or products you need to keep that 1973 Oldsmobile Delta 88 running smoothly.
Distributors are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1973 Oldsmobile Delta 88. Carquest, Carquest Premium, and PerTronix are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Distributors for your 1973 Oldsmobile Delta 88, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 374 reviews in this category, some of the top rated parts include D1100 Flame-Thrower Distributor HEI Oldsmobile V8 Black Cap with 1.0 stars and D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black with 1.0 stars.
So if you’re in the market for aftermarket Distributors to keep your 1973 Oldsmobile Delta 88 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Distributors Brands To Make Your 1973 Oldsmobile Delta 88 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1973 Oldsmobile Delta 88 demands trusted brand parts and products to keep it running. Many trusted brands of Distributors make up Advance Auto Parts’ inventory, and all are ready to help make your Delta 88 the best it can be. Be sure to browse some of our top Distributors brands and parts.
Popular Carquest Distributors
We carry Carquest parts in our stock across Distributor Rotor Buttons and Distributor Cap Kits categories, plus more. For a 1973 Oldsmobile Delta 88, our most popular Carquest Distributors include:
FAQs for 1973 Oldsmobile Delta 88 Distributors
What are the most purchased Distributors for the 1973 Oldsmobile Delta 88?
Out of 31 Distributors for the 1973 Oldsmobile Delta 88, the most popular in our inventory are:
What are the top-rated 1973 Oldsmobile Delta 88 Distributors?
Top-rated Distributors for your 1973 Oldsmobile Delta 88 based on customer reviews/ratings are:
from
$328.99
(1)
D1100 Flame-Thrower Distributor HEI Oldsmobile V8 Black Cap
“Disappointed!!! Opened box and the distributor cap had one prong broken. I also heard a rattle. Took off distributor and the rotor was broken as th”
from
$41.99
(1)
D4000 Flame-Thrower HEI Distributor Cap and Rotor Kit Black
“The slots made in the distributor cap for the wiring terminal blades do not have the correct clearance for the blades to be installed properly. The s”
from
$42.99
(1)
D4002 Flame-Thrower HEI Distributor Cap and Rotor Kit Blue
“Purchased for an 89 corvette which uses a bolt on cap. The discription said it was bolt on. But when it arrived it was the L latch type. So it woul”
