1973 Jeep CJ6 Drivetrains
More 1973 Jeep CJ6 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1973 Jeep CJ6, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1973 Jeep CJ6 Drivetrains
Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)
from
$26.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
- Left hand thread
National – Multi Purpose Seal (Part No.722108)
from
$11.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Dorman – Standard Spindle Nut 1 In.-5/8 In.-16 Hex 2-1/16 In. (sold by each) (Part No.615-126)
from
$12.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Dana 20 / 44 Axle Bearing And Seal Kit Replacement (Part No.10042)
from
$123.99
Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
- Includes axle bearing and seal
- Services one side
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
Yukon Gear – Carrier Installation Kit For Dana 30 Differential (Part No.57002)
from
$99.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 30 differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30
- Includes carrier bearings and races and carrier shim kit
Yukon Gear – (4) Full Circle Snap Rings, Fit 297X U-Joint With Aftermarket Axle (Part No.32084)
from
$19.99
(4) Full Circle snap rings, fit 297X U-joint with aftermarket axle.
Product Features:
See More
Product Features:
- Set of four full circle snap rings for Dana Spicer 30 and 44 and GM 8.5″ front
Yukon Gear – Drive Flange Cap For Dana 44 (Part No.32134)
Yukon Gear – Dana 44 Cover Gasket Replacement (Part No.23006)
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
MOOG Driveline Products – Double Cardan CV Centering Yoke (Part No.607)
from
$109.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Machined bodies to meet the tight tolerances
- Forged and cast material to meet the performance requirement
- Minimize the flash lines for less interference
- Cleaning process induces compressive strength for increased performance
- Machined and threaded holes for mounting ease
- Rust preventative added for longer shelf life
Powertrax – Lock Right Locker (Part No.2110-LR)
from
$425.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Crown Auto Jeep Replacmnt – OE Replacement (Part No.J0914802)
from
$11.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Yukon Gear – Dana 30 Side Gear Thrust Washer (Part No.33284)
from
$10.99
Dana 25, Dana 27, & Dana 30 side gear Thrust washer.
Product Features:
See More
Product Features:
- Side gear thrust washer for Dana Spicer 25, 27, 30 and AMC Model 35
- 1.560″ I.D.
- Fits standard open differentials only
Omix – Transfer Case Gasket (Part No.18603.51)
from
$3.29
Tired of looking at the stains on your driveway? Gaskets are a cheap solution to prevent or stop leaks. Omix-ADA offers high quality replacement gaskets designed specifically for your Jeep.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Prevents Leaks
- Limited 5 Year Warranty
Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
Yukon Gear – Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24 (Part No.33038)
from
$11.99
Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8″ x 24.
Product Features:
See More
Product Features:
- Ring gear bolt for Dana Spicer 25, 27, 30, 44 and AMC Model 35
- 3/8″ x 24 thread
Yukon Gear – Replacement Standard Open Carrier Case For Dana 44, 30 Spline, 3.73 & Down, Bare (Part No.20115)
from
$203.99
Yukon replacement standard open carrier case for Dana 44, 30 spline, 3.73 & down, bare. This case includes carrier shims, roll pin, ring gear bolts and a cover gasket.
Product Features:
See More
Product Features:
- Standard open carrier case
- Does not include spider gears
- Includes carrier shims, roll pin, ring gear bolts and a cover gasket.
- Fits Dana Spicer 44
- 3.73 and down ratio only
Rugged Ridge – Locking Hub (Part No.15001.02)
from
$286.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r
Product Features:
See More
Product Features:
- Impact Resistant Nodular Iron
- Corrosion Resistant
- Better 4WD Performance
- Better Fuel Economy
- Easy Install
Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)
from
$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 30 and Dana Spicer 44
- 0.235″ diameter
National – Bearings (Part No.LM501310)
from
$9.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.02820)
from
$12.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Needle Bearing (Part No.S-B-2110)
from
$7.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)
from
$18.99
1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
- 1310 and 1330 u-joint size
- Includes two straps and four bolts
Yukon Gear – Dana 28 & Dana 30 Pinion Gear Thrust Washer (Part No.33285)
from
$7.99
Dana 28 & Dana 30 pinion gear Thrust washer. Also fits AMC Model 35 with 1.560″ side gear bore only.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Dana Spicer 25, 27 and 30
Omix – Transfer Case Intermediate Gear (Part No.18670.17)
from
$222.99
Is your Dana 18 transfer case not shifting right? Do you cringe from the grinding noises when you shift? Omix-ADA has the Dana 18 internal parts you need to fix your Jeep’s transfer case. Fix it and enjoy your ride.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Dorman – Spindle Washer – I.D. 41.4mm O.D. 65.0mm Thickness 1.7mm (sold by each) (Part No.618-058)
from
$3.79
Our Spindle Nut Washers are coated for high corrosion resistance and a long service life. Depending on the application, they are also available in a kit that includes the nut, washer, and retainer.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Conveniently available in packs of different quantities
- Durable steel construction
- Dorman’s Spindle Nut Washers are designed and constructed to strict engineering quality standards
Popular 1973 Jeep CJ6 Drivetrains Categories
1973 Jeep CJ6 Drivetrains
You count on your 1973 Jeep CJ6 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 380 Drivetrains ranging in price from $1.99 to $1,337.99, you’re sure to find everything you need for your 1973 Jeep CJ6.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 19 different brands like Valvoline, Moog, and Driveworks. 1973 Jeep CJ6 Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 5,688 extensive product reviews on 1973 Jeep CJ6 Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.6 stars and Universal Joint with 4.9 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1973 Jeep CJ6 below to get started!
Top-Rated Drivetrains Brands For Your 1973 Jeep CJ6
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1973 Jeep CJ6 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Milemarker Drivetrains
You’ll find popular Milemarker brand products across 4WD Components. All are waiting to get your 1973 Jeep CJ6 back on the road. Some of the top-rated Milemarker products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1973 Jeep CJ6, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1973 Jeep CJ6 Drivetrains
What are the most purchased Drivetrains for the 1973 Jeep CJ6?
Out of 380 Drivetrains for the 1973 Jeep CJ6, the most popular in our inventory are:
What are the top-rated 1973 Jeep CJ6 Drivetrains?
Top-rated Drivetrains for your 1973 Jeep CJ6 based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
from
$28.99
(12)
Universal Joint
“No problems with Installation and appears to be quality part! Great for my old School Street Car!”
from
$6.49
(10)
Axle Housing Cover Gasket
“fit perfectly and was easy to work with.no more leaking rear differential.”
