1973 Ford LTD Transmission Torque Converters

Converter: C-6 1.375 Cp 24-2800 Stall

Convrtr: C-4 26 Spl Case Fill 24-2800

Convrtr: C-4 24 Spl Case Fill 24-2800

Hays Race Tq Conv C4:Pan:36-4200:26Spl

Hays Race Conv C4 24Spl:Case: 28-3200

Torque Converter

Torque Converter

TORQUE CONVERTER

Torque Converter

Converter: Fmx 28-3200 Stall

Torque Converter

This B&M Holeshot 2600 fits 1966-91 Ford C6 transmissions with a 1.375-inch crank pilot and has an 11 7/16-inch bolt circle. The Holeshot converters are an excellent choice for vehicles with engine modifications, particularly big cams that tend to reduce low-end power and torque. The higher stall speed of this converter will launch the car in a higher rpm range where more torque is readily available, resulting in quicker acceleration. Holeshot converters feature furnace brazed impeller fins and turbine, a new precision alloy impeller hub, and new heavy-duty needle bearings. Other features include fully balanced and pressure tested by expert technicians. If your vehicle is equipped with a plate-type nitrous system or supercharger, please refer to the Nitrous Holeshot line of converters. Notes: Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. This converter is Not recommended for supercharged, plate-type nitrous oxide, or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product.

Product Features:

• Precision Balanced on Certified Balance Equipment
• Copper Furnace Brazed Impeller and Turbine
• New Precision Alloy Steel Impeller Hub
• Race Proven Technology & Quality

A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength. Due to torque converter co

Product Features:

• New Precision Pump Drive Tube
• Pressure Tested
• Fully Balanced
• Needle Thrust Bearing
• New Thrust Washer

A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength. Due to torque converter co

Product Features:

• Furnace Brazed Impeller
• Steel Alloy Pump Drive Tube
• Heavy Duty Needle Bearing
• Between Stator and Turbine
• Furnace Brazed Turbine

Torque Converter

Converter: C-6 1.848 Cp 24-2800 Stall

Convrtr: C-4 26 Spl Case Fill 28-3200

Converter: C-6: 1.375 Cp 28-3200 Stall

Convrtr: C-4 24 Spl Case Fill 28-3200

Convrtr: C-4 26 Spl Pan Fill 28-3200

Converter: Fmx 24-2800 Stall

A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.

Product Features:

• Furnace Brazed Impeller
• Higher Than Stock Stall Speed

A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.

Product Features:

• Furnace Brazed Impeller
• Steel Alloy Pump Drive Tube
• Heavy Duty Needle Bearing
• Between Stator and Turbine
• Furnace Brazed Turbine
• New Turbine Hub
• New Springs/Rollers In Stator

Convrtr: C-4 26 Spl Pan Fill 24-2800

A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength.

Product Features:

• New Precision Pump Drive Tube
• Pressure Tested
• Fully Balanced
• Needle Thrust Bearing
• New Thrust Washer

TCR was established by a group of industry veterans determined to create a torque converter company that puts customers and people first. Our people have the values, knowledge, and experience to provide our customers with great products and personal service. Our products are built by highly skilled professionals with decades of experience. Our product line includes automotive, heavy duty and high performance converters for all makes and models.

Product Features:

• TCR ensures the highest quality with its remanufactured torque converters utilizing O.E. bearing and new seals when possible.
• TCR automotive, heavy duty and high performance converters are built by professionals with decades of experience.

TCR was established by a group of industry veterans determined to create a torque converter company that puts customers and people first. Our people have the values, knowledge, and experience to provide our customers with great products and personal service. Our products are built by highly skilled professionals with decades of experience. Our product line includes automotive, heavy duty and high performance converters for all makes and models.

Product Features:

• TCR ensures the highest quality with its remanufactured torque converters utilizing O.E. bearing and new seals when possible.
• TCR automotive, heavy duty, and high performance converters are built by professionals with decades of experience.

TCR was established by a group of industry veterans determined to create a torque converter company that puts customers and people first. Our people have the values, knowledge, and experience to provide our customers with great products and personal service. Our products are built by highly skilled professionals with decades of experience. Our product line includes automotive, heavy duty and high performance converters for all makes and models.

Product Features:

• TCR ensures the highest quality with its remanufactured torque converters utilizing O.E. bearing and new seals when possible.
• TCR automotive, heavy duty, and high performance converters are built by professionals with decades of experience.