1973 Ford Gran Torino Differentials

Essential 1973 Ford Gran Torino Differentials

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Pinion Install Kit For Ford 9" Differential, 28 Spline, Oversize (Part No.13052)

Pinion Install Kit For Ford 9" Differential, 28 Spline, Oversize

from

$434.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 9″ with oversize Daytona pinion support
  • 28 spline
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Mr. Gasket – Rear End Gasket – Ford 9" – Blend Of Nitrile Rubber And Fiber For Excellent Sealing And Durability (Part No.82)

Rear End Gasket - Ford 9" - Blend Of Nitrile Rubber And Fiber For Excellent Sealing And Durability

from

$21.79
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1957-1981 Ford 10 bolt 9 inch ring gear.

Product Features:
  • .047″ thick cellulose/nitrile composite gasket material
  • Precision die cut
  • Reusable
See More

Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler

from

$4.99
Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

Product Features:
  • Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
See More

Yukon Gear – Trac Loc Steel Clutch Plate, 4 Tab (Part No.16178)

Trac Loc Steel Clutch Plate, 4 Tab

from

$8.99
Product Features:
  • Steel clutch plate
  • Fits Ford 8″ and 9″ Trac Loc
See More

Yukon Gear – Yoke For Ford 9" With 35 Spline Pinion And A 1350 U/Joint Size (Part No.41058)

Yoke For Ford 9" With 35 Spline Pinion And A 1350 U/Joint Size

from

$304.99
Yukon yoke for Ford 9″ with 35 spline pinion and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 9″
  • 35 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • U-bolt style
See More

Yukon Gear – Grizzly Locker For Ford 9" With 31 Spline Axles, Racing Design (Part No.28010)

Grizzly Locker For Ford 9" With 31 Spline Axles, Racing Design

from

$1183.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. This unit requires the use of a 3.250″ dropout. Use carrier bearing/race numbers LM104949/LM104911. The Yukon Grizzly locker uses 8620 internals and a patented design to provide maximum strength and reduce common failures. Assembled in the USA! This unit has been approved for competition in NASCAR National & Touring series. This is a race unit designed for extreme off road use or racing. All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This locker also fits 9.5″ & 10″ dropouts.

Product Features:
  • Fits Ford 9″ with 31 spline axles
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
  • Aggressive design for racing applications only
See More

Felpro – Differential Carrier Gasket (Part No.RDS 13270)

Differential Carrier Gasket

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Mini Spool For Ford 9" With 31 Spline Axles (Part No.32057)

Mini Spool For Ford 9" With 31 Spline Axles

from

$51.99
Mini Spool for Ford 9.0 with 31 spline axles. Cross is bored for three cross pins. Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 9″ with 31 spline axles
  • Installs into a standard open carrier case
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Motive Gear – Differential Gear Install Kit (Part No.F9IK)

Differential Gear Install Kit

from

$33.99
Product Features:
  • MINI INSTALL KIT FORD 9″
See More

Yukon Gear – Trac Loc For Ford 9" Wtih 31 Spline Axles – Street Design (Part No.26010)

Trac Loc For Ford 9" Wtih 31 Spline Axles - Street Design

from

$789.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Trac Loc uses a nodular case, billet side hat, and forged internals for higher strength than stock Trac-Locs. The units use composite clutches for high performance and long life. All units are Rebuildable. Yukon offers a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 9″ with 31 spline axles
  • Trac Loc positraction
  • Clutch style positraction
  • Street design
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Bearing Race Driver (Part No.56023)

Bearing Race Driver

from

$219.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M88010 race
  • All steel construction
See More

FAG US – TAPERED ROLLER BEARI (Part No.KT45)

TAPERED ROLLER BEARI

from

$24.29
TAPERED ROLLER BEARI

Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement

from

$5.99
Product Features:
  • Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
  • 0.030″ thick
See More

Yukon Gear – Side Gear With Hub For 8" And 9" Ford With 28 Splines (Part No.16163)

Side Gear With Hub For 8" And 9" Ford With 28 Splines

from

$46.99
Side gear with hub for 8″ and 9″ Ford with 28 splines.

Product Features:
  • Side gear with hub
  • Fits Ford 8″ and 9″ standard open differential and Trac Loc positraction with 28 spline axles
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Motive Gear – Differential Mini Spool (Part No.MS9-31)

Differential Mini Spool

from

$31.99


Product Features:
  • MINI SPOOL 8″ & 9″ 31 SPLN STL 090431
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Yukon Gear – Minor Install Kit For Ford 9" Differential (Part No.12036)

Minor Install Kit For Ford 9" Differential

from

$54.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), marking compound and brush.

Product Features:
  • Fits Ford 9″
  • Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
See More

Motive Gear – Differential Pinion Nut (Part No.379570S)

Differential Pinion Nut

from

$6.49
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-35)

Tapered Cone/Cup Wheel Bearing Set

from

$13.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Star Washers, 3.062" Ford 9" Drop Out New Design Only (Part No.32143)

Star Washers, 3.062" Ford 9" Drop Out New Design Only

from

$4.99
STAR washers, 3.062″ Yukon Ford 9″ Drop Out new design ONLY.

Product Features:
  • Star washer
  • Fits Ford 9″
  • 3.062″ designs only
See More

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4104)

Differential Pinion Solid Spacer Kit w/Shims

from

$10.49


Product Features:
  • SOLID SPACER FORD 8.8″ & 9″
See More

Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)

Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out

from

$3.99
Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.

Product Features:
  • Side adjuster lock bolt
See More

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)

One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout

from

$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.

Product Features:
  • Carrier race
  • Fits Ford 9″
  • Conversion race to install small bearing carrier into 3.250″ dropout
See More

Yukon Gear – 3.062" Side Adjuster For Ford 9" (Part No.32139)

3.062" Side Adjuster For Ford 9"

from

$94.99
3.062″ side adjuster, Only Fits Yukon Ford 9″ Drop Out, new design ONLY.

Product Features:
  • Side adjuster
  • Fits Ford 9″
  • 3.062″ designs only
See More

Motive Gear – Nodular Differential Housing (Part No.26306)

Nodular Differential Housing

from

$533.99


Product Features:
  • NODULAR HOUSING 9″ FORD 3.062 BORE STRANGE # N1905
See More

1973 Ford Gran Torino Differentials

Maybe you’re in the middle of a full rebuild of that 1973 Ford Gran Torino. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 373 different Differentials in our inventory ranging from $1.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1973 Ford Gran Torino running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1973 Ford Gran Torino. Driveworks, Yukon Gear, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1973 Ford Gran Torino, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,101 reviews in this category, some of the top rated parts include Multi Purpose Seal with 5.0 stars and Differential Crush Sleeve with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1973 Ford Gran Torino rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1973 Ford Gran Torino Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1973 Ford Gran Torino demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Gran Torino the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Automatic Transmission Differential Cover Gaskets categories, plus more. For a 1973 Ford Gran Torino, our most popular Felpro Differentials include:
Differential Carrier Gasket
from $8.49
(9)
Differential Carrier Gasket
Automatic Transmission Differential Cover Gaskets

Top 1973 Ford Gran Torino Differentials from Driveworks

Driveworks products are another trusted brand when it comes to Differentials for your 1973 Ford Gran Torino. Popular Driveworks parts include:
Tapered Cone/Cup Wheel Bearing Set
from $13.99
(14)
Tapered Cone/Cup Wheel Bearing Set
Front Differential Pinion Bearings
Oil Seal
from $4.29
(1)
Oil Seal
Differential Pinion Seals

FAQs for 1973 Ford Gran Torino Differentials

What are the most purchased Differentials for the 1973 Ford Gran Torino?

Out of 373 Differentials for the 1973 Ford Gran Torino, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Pinion Crush Sleeves
from $5.99
This product is not rated
Pinion Crush Sleeves
Differential Crush Sleeves
Bearings
from $9.49
This product is not rated
Bearings
Rear Differential Pinion Bearings

What are the top-rated 1973 Ford Gran Torino Differentials?

Top-rated Differentials for your 1973 Ford Gran Torino based on customer reviews/ratings are:
Multi Purpose Seal
from $15.79
(3)
Multi Purpose Seal
“good quality”
Differential Crush Sleeve
from $2.49
(1)
Differential Crush Sleeve
“High quality, would buy again”
No-Slip Traction System
from $551.99
(1)
No-Slip Traction System
“Installed, no issues, works great.”