1973 Dodge W100 Pickup Drivetrains
More 1973 Dodge W100 Pickup Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1973 Dodge W100 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1973 Dodge W100 Pickup Drivetrains
Yukon Gear – Standard Open Spider Gear Kit For ’96 And Older 8.25" Chrysler With 27 Spline Axles (Part No.16002)
from
$301.99
Yukon standard open spider gear kit for ’96 and older 8.25″ Chrysler with 27 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Chrysler 8.25″ open differntial with 27 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – O-Ring For Toyota & Dana 44 Zip Locker Seal Housing (Part No.34004)
from
$11.29
Product Features:
See More
- O-ring for seal housing
- Fits Dana Spicer 44 and Toyota 8″ and V6
National – Multi Purpose Bearing (Part No.HB-88107-A)
from
$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Fill Plug For Chrysler 8.75", 3/4" Thread (Part No.33462)
from
$9.99
Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality
Product Features:
See More
Product Features:
- Fill plug
- Fits Chrysler 8.75″
Yukon Gear – Replacement Chrome Cover For Dana 44 (Part No.32004)
from
$67.99
0.080″ thick Chrome replacement cover for Dana 44.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 44
- Chrome
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
Motive Gear – Differential Ring and Pinion (Part No.C9.25-410)
Yukon Gear – Dana 44 Grizzly Locker Replacement (Part No.28001)
from
$998.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 with 30 spline axles
- 3.92 and up ratio only
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
USA Standard Gear – Steel Spool For Dana 44 With 30 Spline Axles, 3.73 & Down (Part No.59013)
from
$282.99
Product Features:
See More
- Fits Chrysler Dana Spicer 44 with 30 spline axles
- 3.73 and down ratio only
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
National – Bearings (Part No.31520)
from
$12.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Differential Pinion Yoke Assembly (Part No.697-542)
from
$111.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
- Effective fix – replacement restores proper connection between drive shaft and differential
- Rigorously tested – designed and evaluated to assure safe, reliable operation
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Motive Gear – Differential Pinion Seal (Part No.5126B)
from
$9.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)
from
$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Powr Lok button kit
- Fits Dana Spicer 30, 44 and Chrysler 8.75″
Yukon Gear – Dana 44 Outer Stub Axle Replacement (Part No.21108)
from
$179.99
Yukon 1541H replacement outer stub axle shaft for Dana 44, ’71-’79 Ford Bronco with a length of 9.72 inches and with 19 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy front axles come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 in Ford F150 and Bronco and Jeep Wagoneer with drum brakes
- Outer stub
- 19 spline
- 9.72″ from end of splines to center of u-joint bore
Yukon Gear – 8.75" Chrysler Gasket (Part No.23001)
Yukon Gear – Air Line Repair Kit, Zip Locker (Part No.34003)
from
$52.99
Air line repair kit, ZIP locker.
Product Features:
See More
Product Features:
- Air line repair kit
- Includes 20′ air line and two repair fittings
Yukon Gear – Pinion Install Kit For Chrysler 8.75" (#41) Differential (Part No.13005)
from
$292.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″ ’41’ case
- Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
Richmond Gear – RngPnnInstlKt (Part No.83-1034-B)
from
$59.99
RngPnnInstlKt
Yukon Gear – Replacement Oil Baffle For Dana 44 (Part No.33000)
Dorman – Spindle Washer – I.D. 1-5/8 In. O.D. 2-3/16 In. Thickness 1/8 In. (Part No.618-040.1)
from
$6.99
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM (Part No.30219)
from
$83.99
Replacement front axle inner seal redi-sleeve for Dana 44 & 8.5″ GM.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Axle Redi-sleeve
- Fits Dana Spicer 44
Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)
from
$26.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
- Left hand thread
Driveworks – Tapered Roller Bearing (Part No.S-LM-603011)
USA Standard Gear – Open Spider Gear Set For Chrysler 8.25", 27 Spline (Part No.39002)
from
$209.99
USA Standard Gear open spider gear set for Chrysler 8.25″, 27 spline .
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Chrysler 8.25″ 27 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – C/Clip (Part No.33083)
from
$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.
Product Features:
See More
Product Features:
- c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
- .150″ thick
Yukon Gear – Spindle Bearing For Dana 44 (Part No.33493)
from
$23.99
Spindle bearing for Dana 44. This replaces Spicer part number 550759.
Product Features:
See More
Product Features:
- Spindle bearing
- Fits Dana Spicer 44
Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)
from
$182.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits Dana Spicer 25, 27, 30, 4 and 50
Popular 1973 Dodge W100 Pickup Drivetrains Categories
1973 Dodge W100 Pickup Drivetrains
You count on your 1973 Dodge W100 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 371 Drivetrains ranging in price from $2.49 to $1,302.99, you’re sure to find everything you need for your 1973 Dodge W100 Pickup.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 18 different brands like Moog, National, and Yukon Gear. 1973 Dodge W100 Pickup Drivetrains start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,218 extensive product reviews on 1973 Dodge W100 Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are Multi Purpose Bearing with 3.4 stars and MileMarker Street Master; Manual Hub with 4.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1973 Dodge W100 Pickup below to get started!
Top-Rated Drivetrains Brands For Your 1973 Dodge W100 Pickup
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1973 Dodge W100 Pickup running right for years to come. In our inventory you’ll find brands like Moog, National, Yukon Gear, and even more.
Popular Spicer Drivetrains
You’ll find popular Spicer brand products across Drive Shafts and Axles. All are waiting to get your 1973 Dodge W100 Pickup back on the road. Some of the top-rated Spicer products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1973 Dodge W100 Pickup, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1973 Dodge W100 Pickup Drivetrains
What are the most purchased Drivetrains for the 1973 Dodge W100 Pickup?
Out of 371 Drivetrains for the 1973 Dodge W100 Pickup, the most popular in our inventory are:
What are the top-rated 1973 Dodge W100 Pickup Drivetrains?
Top-rated Drivetrains for your 1973 Dodge W100 Pickup based on customer reviews/ratings are:
