1973 Dodge Charger Performance Exhaust Products
More 1973 Dodge Charger Performance Exhaust Products
Find your specific 1973 Dodge Charger original or aftermarket Performance Exhaust Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1973 Dodge Charger Performance Exhaust Products
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842446)
from
$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Delta Muffler 409S – 2.25 Offset In / 2.25 Offset Out – Aggressive Sound (Part No.842443)
from
$125.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.43043)
from
$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.8043043)
from
$123.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Dynomax – Super Turbo Muffler: Di Fit Aluminized Steel, 16" L, 2.5" In, 2.5" Out, Oval (Part No.17662)
from
$87.99
Dynomax Super Turbo performance mufflers’ exclusive, patented, flow director design channels exhaust flow, and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow, and reduce backpressure. Each muffler uses fibe
Product Features:
See More
Product Features:
- Large internal flow tubes improve exhaust flow and reduce backpressure
- Dyno proven to flow up to 700 SCFM
- Exclusive patented flow director channels exhaust flow and eliminates turbulence on most applications.
- Fiberglass matting technology absorbs unwanted interior resonance but maintains a mellow tone
- 1.75-inch to 3-inch inlet / outlet configurations
Dynomax – 55232 Exhaust Tail Pipe (Part No.55232)
from
$236.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from aluminized steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Rear Exit – Pair (Part No.15806)
from
$226.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Dynomax – Tail Pipe (Part No.55341)
from
$290.99
Dynomax® Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax® product is backed by engineers who know what you want and expect out of a performance exhaust product.
Product Features:
See More
Product Features:
- Mandrel bends improve flow capacity over traditional bends
- Combine state-of-the-art engineering with quality material to provide exceptional strength and durability
- Dynomax® premium pre-bent pipe is manufactured with precision benders, and then fixture checked, insuring every part is a perfect fit, providing quick and easy installation.
- Pipe diameters are increased from OEM sizes to improve flow and increase power
Mr. Gasket – Header Bolts (Part No.976)
from
$22.49
When installing headers you will need header bolts, factory exhaust manifold bolts won’t work. These Mr. Gasket Header Bolts are Grade 5 for strength, black oxide coated, and have a compact hex head that is ideal for use where space is minimal – your typical header flanges. Sold as a set of 14.
Product Features:
See More
Product Features:
- 14 per Package
- Heat-Treated For Strength
- Ideal For Tight Spaces
- Grade 5 Material
- Protective Black Finish
Flowtech – Standard Header (Part No.13130FLT)
from
$324.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Flowtech – Ceramic Header (Part No.33100FLT)
from
$578.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Flowtech – Ceramic Header (Part No.33130FLT)
from
$615.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5938)
from
$48.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Mr. Gasket – Exhaust Gasket Set (Part No.353)
from
$30.99
Mr. Gasket Performance Exhaust Gaskets are manufactured from high-temperature composite material. They provides maximum torque retention to eliminate gasket failure. Precision die cut for an excellent fit, but can be trimmed if necessary for modified port applications. For OE replacement, high-performance street, drag race and oval track. Rectangular Ports, 1.00 inch x 1.64 inch
Product Features:
See More
Product Features:
- Manufactured from high-temperature acrylic blend exhaust material
- Provides excellent sealing and durability
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Precision Die Cut For Excellent Fit
Flowtech – Header Gasket Set (Part No.99361FLT)
from
$18.59
Header Gasket Set
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1432)
from
$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5936)
from
$38.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Has A Steel Core With Graphite Facing
- Graphite Facing Has Excellent Thermo-conductivity
- Coated With High Temp Silicone For Sealing
- Will Not (brindle ) Or Indent Aluminum Heads
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1414)
from
$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7167)
from
$60.29
Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.
Product Features:
See More
Product Features:
- Will Not Shrink/Deteriorate
- Creates A Tight Leak Proof Seal
- Helps Lower Under hood Temps
- Seals Irregular Surfaces
- Seals Slightly Damaged Surface
- Ideal For Tow Vehicles
- Ideal For Motor Homes
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1413)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Hooker Headers – Super Competition Header Gasket (Part No.10838HKR)
from
$19.99
Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.
Product Features:
See More
Product Features:
- Tear Resistant
- Precisely Cut To Match Header
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1462)
from
$23.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Popular 1973 Dodge Charger Performance Exhaust Products Categories
1973 Dodge Charger Performance Exhaust Products
Maybe you’re in the middle of a full rebuild of that 1973 Dodge Charger. Maybe you just need a couple of Performance Exhaust Products. Either way, Advance Auto Parts has 15 different Performance Exhaust Products in our inventory ranging from $18.59 to $615.99. That means you can find the exact parts or products you need to keep that 1973 Dodge Charger running smoothly.
Performance Exhaust Products are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1973 Dodge Charger. FEL-PRO Performance, Flowtech, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Exhaust Products for your 1973 Dodge Charger, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Exhaust Products to keep your 1973 Dodge Charger rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Exhaust Products Brands To Make Your 1973 Dodge Charger Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1973 Dodge Charger demands trusted brand parts and products to keep it running. Many trusted brands of Performance Exhaust Products make up Advance Auto Parts’ inventory, and all are ready to help make your Charger the best it can be. Be sure to browse some of our top Performance Exhaust Products brands and parts.
Popular Flowmaster Inc. Performance Exhaust Products
We carry Flowmaster Inc. parts in our stock across Performance Exhaust Tail Pipes and Performance Exhaust Mufflers categories, plus more. For a 1973 Dodge Charger, our most popular Flowmaster Inc. Performance Exhaust Products include:
from
$126.99
(1)
Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
Top 1973 Dodge Charger Performance Exhaust Products from Flowtech
Flowtech products are another trusted brand when it comes to Performance Exhaust Products for your 1973 Dodge Charger. Popular Flowtech parts include:
FAQs for 1973 Dodge Charger Performance Exhaust Products
What are the most purchased Performance Exhaust Products for the 1973 Dodge Charger?
Out of 15 Performance Exhaust Products for the 1973 Dodge Charger, the most popular in our inventory are:
from
$31.49
This product is not rated
Exhaust Manifold Gasket Set
Performance Exhaust Manifold Gaskets
from
$19.99
This product is not rated
Super Competition Header Gasket
Performance Exhaust Manifold Gaskets
