1973 Chevrolet Malibu Drivetrains

Essential 1973 Chevrolet Malibu Drivetrains

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Driveworks – Axle Repair Bearing (Part No.S-RP-5707)

Axle Repair Bearing

from

$16.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Powertrax – Lock Right Locker (Part No.1940-LR)

Lock Right Locker

from

$441.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Posi Spring Kit For GM 7.5", With Preload Plates (Part No.33206)

    Posi Spring Kit For GM 7.5", With Preload Plates

    from

    $153.99
    Product Features:
    • Positraction spring kit
    • Fits GM 7.5″ and 7.625″ Dura Grip
    • Includes preload plates
    See More

    Pro-King – Differential Pinion Yoke Washer (Part No.742A215)

    Differential Pinion Yoke Washer

    from

    $3.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Dorman – Spindle Nut 3/4 In.-20 Hex Size 1-1/16 In. (Part No.615-065.1)

    Spindle Nut 3/4 In.-20 Hex Size 1-1/16 In.

    from

    $6.99
    This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
    • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

    Axle Shaft Lock Assortment

    from

    $6.49
    This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
    • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Yukon Gear – Cross Pin Shaft For 7.5", 7.625", And 8" GM (Part No.33404)

    Cross Pin Shaft For 7.5", 7.625", And 8" GM

    from

    $57.99
    Cross pin shaft for 7.5″, 7.625″, and 8″ GM.

    Product Features:
    • Cross pin shaft for GM 7.5″, 7.625″ and 8.0″
    • Fits standard open differentials only
    See More

    Yukon Gear – Replacement Bare Case For GM 8.5" & 8.6" Dura Grip (Part No.20107)

    Replacement Bare Case For GM 8.5" & 8.6" Dura Grip

    from

    $386.99
    Replacement bare case for GM 8.5″ & 8.6″ Yukon Dura Grip. Fits both 28 & 30 spline applications. This carrier case is for a Yukon Dura Grip ONLY. It is NOT a replacement carrier for a stock positraction.

    Product Features:
    • Dura Grip positraction carrier case
    • Does not include spider gears
    • Fits GM 8.5″ and 8.6″
    • Fits 2.76 and up ratios only
    See More

    Yukon Gear – C/Clip (Part No.33083)

    C/Clip

    from

    $8.99
    C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

    Product Features:
    • c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
    • .150″ thick
    See More

    Yukon Gear – Crush Sleeve (Part No.33110)

    Crush Sleeve

    from

    $5.99
    Crush sleeve for GM 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.2″ & 8.2″ Buick/Olds/Pontiac. .625″ long.

    Product Features:
    • Crush sleeve for GM 7.5″, 7.625″, 7.6″ IFS, 8.2″ and 8.2″ Buick, Oldsmobile and Pontiac
    • 0.625″ tall
    See More

    Yukon Gear – Ring Gear Bolt (Part No.33049)

    Ring Gear Bolt

    from

    $6.99
    Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.

    Product Features:
    • Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
    • 7/16″ x 20
    See More

    Yukon Gear – Pinion Nut Washer (Part No.33167)

    Pinion Nut Washer

    from

    $14.99
    Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

    Product Features:
    • Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.
    See More

    Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (Part No.618-005.1)

    Spindle Washer - I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In.

    from

    $3.79
    This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
    • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Pro-King – Differential Cover Plug (Part No.742G484)

    Differential Cover Plug

    from

    $6.59
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – 7.5 GM Cover Gasket (Part No.23018)

    7.5 GM Cover Gasket

    from

    $11.99
    7.5 GM cover gasket.

    Product Features:
    • Cover gasket
    • Fits GM 7.5″ and 7.625″
    See More

    Motive Gear – Differential Bearing Kit – Timken (Part No.R7.5GRT)

    Differential Bearing Kit - Timken

    from

    $99.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • KIT BRG & SEAL GM 7.5″,’82-98
    See More

    Yukon Gear – Forged Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41093)

    Forged Yoke For GM 8.5" With A 1350 U/Joint Size

    from

    $359.99
    Yukon forged yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits GM 8.5″
    • 30 spline
    • 1350 u-joint size
    • Outside snap ring design
    • 3.625″ snap ring span
    • 1.188″ cap diameter
    • Forged steel
    See More

    Driveworks – Universal Joint (Part No.DW-331)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

    Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

    from

    $9.99
    5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

    Product Features:
    • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
    • 1/2″ head
    See More

    Yukon Gear – Standard Open Spider Gear Kit For Early 7.5" GM With 26 Spline Axles And Large Windows (Part No.16048)

    Standard Open Spider Gear Kit For Early 7.5" GM With 26 Spline Axles And Large Windows

    from

    $149.99
    Yukon standard open spider gear kit for early 7.5″ GM with 26 spline axles and large windows. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

    Product Features:
    • Spider gear kit
    • Fits GM 7.5″ open differential with 26 spline axles
    • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
    See More

    National – Bearings (Part No.M88010)

    Bearings

    from

    $10.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Yoke For GM 7.5" (Mech 3R) In A Triple Lip Design (Part No.41090)

    Yoke For GM 7.5" (Mech 3R) In A Triple Lip Design

    from

    $184.99
    Yukon yoke for GM 7.5″ (mech 3R) in a triple lip design. 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside clips. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits GM 7.5″ and 7.625″
    • 27 spline
    • Mechanics 3R u-joint size
    • Inside snap ring design
    • 2.556″ snap ring span
    • 1.125″ cap diameter
    • Strap style
    See More

    Motive Gear – Differential Mini Spool (Part No.MS10C-28)

    Differential Mini Spool

    from

    $98.99


    Product Features:
    • MINI SPOOL GM 10 BOLT 8.2″ 28 SPLINE
    See More

    Dorman – Help – Auto Transmission Case Vent (Part No.14689)

    Auto Transmission Case Vent

    from

    $6.99
    This transfer case vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

    Product Features:
    • Direct replacement – this transfer case vent is designed to match the fit and function of the original vent on specified vehicles
    • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Yukon Gear – The Carrier Bearing Puller (Part No.56034)

    The Carrier Bearing Puller

    from

    $689.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
    See More

    Yukon Gear – Pinion Install Kit For GM 8.5" Differential (Part No.13069)

    Pinion Install Kit For GM 8.5" Differential

    from

    $173.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits GM 8.5″ rear
    • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
    See More

    Yukon Gear – 14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16064)

    14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

    from

    $373.99
    Product Features:
    • Clutch kit
    • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
    • 14 piece kit
    • Composite clutches
    See More

    Popular 1973 Chevrolet Malibu Drivetrains Categories

    1973 Chevrolet Malibu Drivetrains

    You count on your 1973 Chevrolet Malibu to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 289 Drivetrains ranging in price from $1.99 to $1,153.99, you’re sure to find everything you need for your 1973 Chevrolet Malibu.

    Brands matter. If you want to shop a specific Drivetrains brand, we stock 16 different brands like Valvoline, Moog, and National. 1973 Chevrolet Malibu Drivetrains start as low as $1.99!

    One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 26,280 extensive product reviews on 1973 Chevrolet Malibu Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.6 stars and Greaseable Super Strength Universal Joint with 4.2 stars.

    Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1973 Chevrolet Malibu below to get started!

    Top-Rated Drivetrains Brands For Your 1973 Chevrolet Malibu

    Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1973 Chevrolet Malibu running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, National, and even more.

    Popular Valvoline Drivetrains

    You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1973 Chevrolet Malibu back on the road. Some of the top-rated Valvoline products in these categories are:

    FAQs for 1973 Chevrolet Malibu Drivetrains

    What are the most purchased Drivetrains for the 1973 Chevrolet Malibu?

    Out of 289 Drivetrains for the 1973 Chevrolet Malibu, the most popular in our inventory are:
    Differential Cover Gasket
    from $9.99
    (195)
    Differential Cover Gasket
    Rear Housing Cover Gaskets
    Greaseable Premium Universal Joint
    from $26.99
    (89)
    Greaseable Premium Universal Joint
    U-Joints
    Taper Bearing Set
    from $10.29
    (38)
    Taper Bearing Set
    Differential Bearings

    What are the top-rated 1973 Chevrolet Malibu Drivetrains?

    Top-rated Drivetrains for your 1973 Chevrolet Malibu based on customer reviews/ratings are:
    Universal Joint
    from $15.99
    (52)
    Universal Joint
    “Great product.. Nice easy install”
    Greaseable Super Strength Universal Joint
    from $34.99
    (48)
    Greaseable Super Strength Universal Joint
    “Moog and advanced auto got me out of a bad situation with an amazing part ( u”
    Universal Joint Strap Kit
    from $11.99
    (35)
    Universal Joint Strap Kit
    “Fit on my 99 gmc sierra 1500 z71 perfect”