1973 Chevrolet K20 Suburban Differentials

Essential 1973 Chevrolet K20 Suburban Differentials

USA Standard Gear – Standard Spider Gear Set For GM 10.5" 14 Bolt Truck (Part No.39022)

Standard Spider Gear Set For GM 10.5" 14 Bolt Truck

from

$318.99
Product Features:
  • Spider gear kit
  • Fits GM 10.5″ 14 bolt truck open differential
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

USA Standard Gear – Steel Spool For Dana 44 With 30 Spline Axles, 3.92 & Up (Part No.59015)

Steel Spool For Dana 44 With 30 Spline Axles, 3.92 & Up

from

$289.99
Product Features:
  • Fits Chrysler Dana Spicer 44 with 30 spline axles
  • 3.92 and up ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Carrier Installation Kit For Dana 60 Differential (Part No.57005)

Carrier Installation Kit For Dana 60 Differential

from

$194.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 60 differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Dana Spicer 60
  • Includes carrier bearings and races and carrier shim kit
See More

Yukon Gear – Seal Housing For Dana 44, Zip Locker, With O-Rings (Part No.34013)

Seal Housing For Dana 44, Zip Locker, With O-Rings

from

$83.99
Product Features:
  • Seal housing for Dana Spicer 44
  • Includes o-rings
See More

Yukon Gear – 14T Side Gear Thrust Washer (Part No.33383)

14T Side Gear Thrust Washer

from

$7.99
14T side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 10.5″ 14 bolt truck
See More

Mr. Gasket – Differential Gasket (Part No.84B)

Differential Gasket

from

$18.09
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1964-1970 Chevrolet 8.2 inch 10 bolt & 1970-1981 GM 8.5 inch ring gear

Product Features:
  • .047″ thick cellulose/nitrile composite gasket material
  • Precision die cut
  • Reusable
See More

Yukon Gear – Minor Install Kit For Dana 44 Differential (Part No.12017)

Minor Install Kit For Dana 44 Differential

from

$142.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits standard rotation Dana Spicer 44 front
  • Included are a pinion seal, axle seals, complete shim kit, marking compound and brush.
See More

Yukon Gear – Grizzly Locker For Dana 60, 4.10 & Down, 30 Spline (Part No.28002)

Grizzly Locker For Dana 60, 4.10 & Down, 30 Spline

from

$1025.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:
  • Fits Dana Spicer 60 with 30 spline axles
  • 4.10 and down ratio only
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

Yukon Gear – Dana 44 Pinion Gear Thrust Washer (Part No.33281)

Dana 44 Pinion Gear Thrust Washer

from

$4.99
Dana 44, GM55P & 8.2″ GM pinion gear Thrust washer.

Product Features:
  • Pinion gear thrust washer for Dana Spicer 44, GM 8.2″ and 1955-1964 GM passenger car
See More

Yukon Gear – Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement (Part No.33012)

Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement

from

$6.99
Product Features:
  • Inner oil slinger for Dana Spicer 25, 27, 30, 44 and 50
See More

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Front 4340 Axle Kit For Dana 44’69-’80 GM Truck And Blazer, Dana 44 With 19/30 Splines (Part No.21413)

Front 4340 Axle Kit For Dana 44'69-'80 GM Truck And Blazer, Dana 44 With 19/30 Splines

from

$1065.00
Yukon front 4340 Chrome-Moly replacement axle kit for Dana 44’69-’80 GM truck and Blazer, Dana 44 with 19/30 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. This kit comes with inner & outer axles for both left and right sides along with Spicer universal joints. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:
  • Front axle kit
  • Fits 1969-1980 GM half ton front with Dana Spicer 44
  • 4340 Chromoly axles
  • 30 spline inner axles
  • Includes inner and outer axle shafts with Spicer u-joints
See More

Yukon Gear – Replacement Oil Baffle For Dana 44 (Part No.33000)

Replacement Oil Baffle For Dana 44

from

$6.99
Product Features:
  • Oil baffle for Dana Spicer 44
See More

Yukon Gear – 10.5" GM 14 Bolt Truck Pinion Nut (Part No.33148)

10.5" GM 14 Bolt Truck Pinion Nut

from

$48.99
10.5″ GM 14 bolt truck pinion nut. 1 1/2″ socket, 15/16″ x 16 thread.

Product Features:
  • Pinion nut for GM 10.5″ 14 bolt truck
  • 15/16″ x 16 thread
  • 1.5″ socket
See More

Yukon Gear – Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24 (Part No.33038)

Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 - 3/8" X 24

from

$11.99
Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8″ x 24.

Product Features:
  • Ring gear bolt for Dana Spicer 25, 27, 30, 44 and AMC Model 35
  • 3/8″ x 24 thread
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 6095-1)

DIFFERENTIAL GASKET

from

$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Motive Gear – Pinion Seal (Part No.26064030)

Pinion Seal

from

$23.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Zip Locker Soleniod Valve (Part No.34014)

Zip Locker Soleniod Valve

from

$99.99
Zip Locker soleniod valve.

Product Features:
  • Solenoid valve
See More

Yukon Gear – 10.5" GM 14 Bolt Truck Crush Sleeve (Part No.33108)

10.5" GM 14 Bolt Truck Crush Sleeve

from

$7.99
10.5″ GM 14 bolt truck crush sleeve, 1988 & OLDER. Approx 0.825″ long.

Product Features:
  • Crush sleeve for 1988 and down GM 10.5″ 14 bolt truck
  • 0.825″ tall
See More

FAG US – CUP (Part No.LM104911)

CUP

from

$13.29
CUP

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

from

$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Powr Lok button kit
  • Fits Dana Spicer 30, 44 and Chrysler 8.75″
See More

Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)

Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P

from

$26.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.

Product Features:
  • Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
  • Left hand thread
See More

USA Standard Gear – Replacement Ring & Pinion Gear Set For Dana 44 In A 3.08 Ratio (Part No.36038)

Replacement Ring & Pinion Gear Set For Dana 44 In A 3.08 Ratio

from

$287.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits standard rotation Dana Spicer 44
  • 8.50″ ring gear diameter
  • 26 spline pinion
  • 10 ring gear bolts
  • 3.08 ratio
See More

USA Standard Gear – Dana 44 Front Bearing Kit Replacement (Part No.58036)

Dana 44 Front Bearing Kit Replacement

from

$222.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits standard rotation Dana Spicer 44 front
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, marking compound and brush.
See More

Yukon Gear – Bearing Race Driver (Part No.56006)

Bearing Race Driver

from

$215.99
Bearing race driver for Dana 44 rear. (TK 31520) No return.

Product Features:
  • Bearing race driver
  • Fits 31520 race
  • All steel construction
See More

Yukon Gear – Pinion Install Kit For Dana 44 Differential (Part No.13020)

Pinion Install Kit For Dana 44 Differential

from

$264.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits standard rotation Dana Spicer 44 front
  • Included are pinion bearings and races, pinion seal, complete pinion shim kit, and marking compound with brush.
See More

1973 Chevrolet K20 Suburban Differentials

Maybe you’re in the middle of a full rebuild of that 1973 Chevrolet K20 Suburban. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 302 different Differentials in our inventory ranging from $1.89 to $1,566.99. That means you can find the exact parts or products you need to keep that 1973 Chevrolet K20 Suburban running smoothly.

Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1973 Chevrolet K20 Suburban. Valvoline, National, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1973 Chevrolet K20 Suburban, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 972 reviews in this category, some of the top rated parts include Differential Ring And Pinion with 5.0 stars and Tapered Roller Bearing with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1973 Chevrolet K20 Suburban rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1973 Chevrolet K20 Suburban Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1973 Chevrolet K20 Suburban demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your K20 Suburban the best it can be. Be sure to browse some of our top Differentials brands and parts.

Top 1973 Chevrolet K20 Suburban Differentials from National

National products are another trusted brand when it comes to Differentials for your 1973 Chevrolet K20 Suburban. Popular National parts include:
Bearings
from $9.99
(8)
Bearings
Rear Differential Pinion Bearings
Bearings
from $23.99
(7)
Bearings
Front Differential Pinion Bearings
Multi Purpose Seal
from $23.29
(4)
Multi Purpose Seal
Differential Pinion Seals

FAQs for 1973 Chevrolet K20 Suburban Differentials

What are the most purchased Differentials for the 1973 Chevrolet K20 Suburban?

Out of 302 Differentials for the 1973 Chevrolet K20 Suburban, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Axle Housing Cover Gasket
from $6.49
(10)
Axle Housing Cover Gasket
Rear Housing Cover Gaskets
Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 - 3/8" X 24
from $11.99
This product is not rated
Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24
Differential Ring Gear Bolts

What are the top-rated 1973 Chevrolet K20 Suburban Differentials?

Top-rated Differentials for your 1973 Chevrolet K20 Suburban based on customer reviews/ratings are:
Differential Ring And Pinion
from $350.99
(7)
Differential Ring And Pinion
“Great spark plugs.”
Tapered Roller Bearing
from $8.49
(7)
Tapered Roller Bearing
“Nice to find them in stock. Fit well and got my SUV up and back on the road quickly”
Oil Seal
from $10.49
(3)
Oil Seal
“Fit the rear Dana 44 on my TJ just fine and stopped the leaking.”