from

$184.99

Melling high performance oil pumps provide dependable performance every time in every application under the toughest RPM conditions. The Melling high performance cast iron oil pump series features a doweled housing and cover, extended drive and idler shafts for additional support at increased RPM’s, a screw in relief spring plug, CNC machined cover and housing that is manganese phosphate coated, standard volume and high volume patented billet Shark Tooth gears, and a chrome moly drive shaft with steel guide. Includes lower pressure spring and self locking socket head bolts with wrench for use with bolt on screen pumps. Every Melling high performance oil pump is individually tested for pressure and flow under actual engine operating conditions. Melling high performance Shark Tooth oil pumps are recommended for all applications where a high performance oil pump is needed.

Product Features:

High pressure standard volume high performance upgrade of the M155
CNC machined phosphate coated cast iron housing and cover
Patented billet steel shark tooth helical gears
Includes chrome moly steel intermediate drive shaft with steel guide
Includes lower pressure spring; not installed
Uses 3/4 inch diameter press-fit screen

from

$369.99

There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block. All kits come complete with hardened parallel ground washers and high quality nuts. Some applications have provisions for mounting wind age trays and have specially designed standoff studs with serrated lock nuts to position the wind age tray and lock it securely in place. The studs are manufactured from 8740 chrome moly steel, heat treated in-house to 200,000 Pounds Per Square Inch tensile strength, and precision J-form threads rolled after heat treat to create a fastener that has threads 1000 Percent stronger than others.

Product Features:

Kit Come Complete With Hardened Parallel Ground Washers And High Quality Nuts
Manufactured From 8740 Chrome Moly Steel
Heat Treated To 200,000 Pounds Per Square Inch
Precision J-Form Threads Rolled After Heat Treat To Create A Fastener That Has Threads 1000 Percent Stronger Than Others
200,000 PSI
Sold As A Kit

from

$45.99

The black finish grade 5 bolts have a bullet tip to make installation easy. The zinc plated self-locking nuts give uniform clamping for a positive seal.

Product Features:

Includes:
(14) 1/4″-20/28 x 1-1/8″ Long
(4) 5/16″-18/24 x 1-5/16″ Long
Zinc Plated Self-Locking Nuts
Assures Positive Gasket Seal
The Professionals Choice

from

$119.99

Spectre’s Engine Dress-Up Kit was designed for the ’58-’86 Chevrolet small block 265-400. This kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stainless steel braided PCV hose with red/blue Magna-Clamps. Designed for use with OE specifications for fit and function, Spectre products are engineered to perform as good as they look.

Product Features:

For Chevrolet small block 265 and 400
Kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stain
Designed for use with OE specifications for fit and function
Made from high quality material

from

$79.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium oil pans meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Road tested to ensure real world performance and to verify that each design meets our high standards for quality
Coating salt spray tested for over 200 hours to insure durability

from

$1.29

This engine connecting rod nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine connecting rod nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$553.99

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Product Features:

For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
Super Locks are recommended in all race applications

from

$30.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$11.79

We offer a comprehensive line of Engine Expansion Plug Kits to cover a range of applications. The kits include all parts necessary for a complete repair.

Product Features:

Direct fit kits available (where applicable) for ease of replacement
Depending on the application, kits include multiple quantities of the following styles: cup Type, Pilot Seal, Reverse Taper, Concave, Quick-Seal® Rubber and Quick-Seal ® Copper
Expansion Plugs also available individually
Dorman’s Engine Expansion Plugs are constructed to strict engineering quality standards

from

$6.49

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$7.29

you have probably heard many a horror story about someone losing an engine when the oil pump fell off into the pan because of a broken bolt. Well, you can put your mind at ease when using ARP premium grade oil pump bolt and stud kits. You have a choice of black oxide finished 8740 chrome moly steel or low maintenance stainless steel. Both are nominally rated at 170,000 PSI tensile strength to provide you with plenty of clamping force. Moreover, take your pick between conventional hex style or 12 point designs. This is insurance that no conscientious engine builder should be without The studs come with flat washers and nuts, while the Ford bolt kit has flat washers only. These inexpensive fasteners can literally save your engine.

Product Features:

Nominally Rated At 170,000 PSI Tensile Strength To Provide You With Plenty Of Clamping Force
Premium Grade Oil Pump Stud
The Studs Come With Flat Washers And Nuts
Black Oxide Finished 8740
Hi-Volume
3.125″

from

$17.79

Big Block Chevrolet tubular head dowel, .638/.639 inch o.d. (outer diameter) by 1/2 inch. Packaged two per set. These hard to find dowel pins are precision machined then case hardened for accurate alignment in engine assembly.

Product Features:

Precision Machined
Case Hardened
Give Accurate Alignment
2 Per Set

from

$219.99

Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter “Z” Chain for Reduced Friction. “Z” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “Z” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$13.99

Heat Treated Steel Bearing Race Material. Must Machine Cam Sprocket or Engiine Block .030″ to Ensure Proper Chain Alignment. Prevents Wear On Engine Block. Can be Used to Repair a Damaged Engine Block Thrust Surface.

Product Features:

Heat Treated Steel Bearing Race Material
Must Machine Cam Sprocket or Engine Block .030″ to Ensure Proper Chain Alignment
Prevents Wear On Engine Block
Can be Used to Repair a Damaged Engine Block Thrust Surface.

from

$98.99

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:

Reliable performance with significant power increase vs stock
Good low-end torque
Recommended for tow vehicle, street rod or muscle car
Power range: 1000-3500rpm
Idle: stock
Cruise: 1600-2200rpm

from

$128.99

Product Features:

Use W/ Valve Springs Part #5762, 5795
Use W/ Locks Part #9612
1.50 in. Outside Diameter
Steel Material
Black Oxide Finish

from

$20.99

Chrome-plated steel oil filler tube. Works with Mr. Gasket’s matching #2063 Oil Filler Cap with PCV fitting.

Product Features:

Chrome plated steel filler tube is 7-3/4″ overall length
Fits Mr. Gasket breather #2063

from

$17.79

A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$11.79

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 57-73; GMC 71-73; PONT 71-72;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1957-1973
Weight approx: 2 Lbs
WITH INTERLOCK
PART GROUP: 2267, 2267

from

$4158.99

ATK High Performance Engines are based on dyno proven combinations built with name brand parts. Most performance engines come in 3 different dress levels and range from 245HP-700HP+ carrying a 2 Year Warranty built by a name you can trust.

from

$316.99

ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

Product Features:

1/2″ 12-Point, 3/16″ Allen Socket Size(s)
8740 Chromoly
Black Oxide
Small Block Chevy
Sold As A Kit

from

$12.99

These Mr. Gasket cam bolt kits feature specially hardened bolts to keep the cam button secure so the cam won’t walk out of place. Can also be used as original equipment replacement. Includes three 5/16 inch-18 x 3/4 inch Long Grade 5 Bolts with Black Oxide Finish.

Product Features:

Black oxide coated Grade 5 steel
Includes flat washers to secure Mr. Gasket cam buttons 1180, 1181 and 1183
Can be used as OE replacement

from

$18.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$27.99

The Edelbrock #4414 valve cover hold-down kits may be used on all Edelbrock and similar design chrome valve covers, our Elite Series and Elite II valve covers, our Classic Series valve covers and our Victor Series valve covers.

Product Features:

Not For Center Bolt Covers
Steel Material
For Big-Block Chevy
Chrome Finish
Set of 7

from

$43.99

Oil Cooler Sandwich Adapter Kit

from

$2.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

State-of-the-art manufacturing
Exceptional material quality
Exacting tolerances
Heat treated tips
Stock or mild modified replacement
Made in USA

from

$190.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Hypereutectic
Made w/exclusive FM425 material for excellent strength & scuff resistance – allows tighter bore and improves sealing for less blow-by
Sophisticated “barrel” profiles help optimize oil wedge between skirt and wall.
Piston skirts protected by next-gen DUROSHIELD« coating.
TAC┐ ring groove geometry
Weight matched to +/- 2 grams.

from

$15.99

Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.

Product Features: