1973 Chevrolet Blazer Fuel and Emissions Systems
More 1973 Chevrolet Blazer Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1973 Chevrolet Blazer, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1973 Chevrolet Blazer Fuel and Emissions Systems
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)
from
$12.29
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Properly Aligned
- Conventional Hex Heads
- Rust-Proof Stainless Bolts
- 170,000 PSI
KAI – Fuel Tank Strap (Part No.FST010123)
from
$26.99
New Platinum Pro Fuel Tank Straps
Product Features:
See More
Product Features:
- 4 Door
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
GM Genuine Parts – Fuel Tank Sending Unit Lock Ring (Part No.TR11)
from
$9.99
GM Genuine Parts Fuel Tank Lock Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
KAI – Fuel Tank (Part No.FTK010028)
from
$111.99
New Platinum Pro Fuel Tank, 4-Door, 96 Blazer/Bravada
Product Features:
See More
Product Features:
- 4 Door
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1003)
from
$2.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Edelbrock – EGR Valve Adapter #8035 For Chevy Small-Block Gen I (Part No.8035)
Dorman – Help – Air Check Valve (Part No.55050)
from
$8.49
The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.
Product Features:
See More
Product Features:
- Emissions, A.I.R Check Valves – 1994-64 AMC, GM, Chrysler, Fiat, Isuzu, Jaguar, Jeep, MG, Nissan,VW
- Air Check Valve
- The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.
- Include gaskets and mounting hardware for a complete repair
- Direct replacement for a proper fit every time
Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)
from
$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X
Product Features:
See More
Product Features:
- Black AnodizedFinish
- High Capacity Fuel Rails
- For Use W/ Pro-Flo XT Manifold #7137
- -6 AN Inlet / Outlet
- Made In The USA
Dorman – Help – Vacuum Storage Canister (Part No.47083)
from
$27.99
This vacuum reservoir is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this vacuum reservoir is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this reservoir is a reliable replacement for an original part that is missing or damaged
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
GM Genuine Parts – Exhaust Gas Recirculation (EGR) Valve (Part No.214-1080)
from
$204.99
GM Genuine Parts Equipment Exhaust Gas Recirculation (EGR) Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These valves are an emission control device. EGR valves modulate the flow of exhaust gas into the intake manifold to help reduce nitrogen oxide (NOx) emissions. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Fuel Pump and Level Sensor Module with Seal, Float, and Harness (Part No.MU1733)
from
$344.99
Fuel Pump and Level Sensor Module with Seal, Float, and Harness
Product Features:
See More
Product Features:
- Helps provide a reliable fuel supply to your vehicle’s engine
- Electrical connections are designed to help eliminate high resistance due to vehicle vibration
- Designed to optimize pump life and reduce fuel pump noise
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Holley – EFI Fuel Pumps (Part No.12-927)
from
$277.99
These universal in-line fuel pumps are intended for fuel Injection systems. They are designed to work in-line, not inside the tank, so installation is a snap. They’re all rated for continuous duty service and have been tested up to 2,500 hours.
Product Features:
See More
Product Features:
- Flows 43 gph At 15 PSI
- Draws 3.5 Amps At 15 PSI
- Will Feed Up To 400 Horsepower Throttle Body EFI Unit
- OE Proven Design
- Lightweight and Compact
- 3/8 in. Barbed Fittings Included
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1515)
from
$12.99
This is what you need when changing your manual fuel pump to electric. It blocks the hole that remains when you remove the mechanical fuel pump from the engine to keep the oil inside. This plate is precision machined and is chrome plated.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- Comes With Gasket
Spectre – Sbc Blk Off Plate W/Bolts (Part No.42463)
from
$12.99
Spectre’s triple chrome plated Fuel Pump Block Off Plate was designed for small block Chevrolet engines. Engineered for optimum fit and function, this kit includes a block off plate gasket and chrome mounting bolts with washers.
Product Features:
See More
Product Features:
- Necessary if switching to electric fuel pump
- Includes block off plate gasket
- Includes chrome mounting bolts with washers
- Triple chrome plated
Flowtech – Reducer w/O2 Sensor Fitting (Part No.10110FLT)
Carquest Premium – Ignition Coil Connector (Part No.PTA1397)
from
$37.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
ACDelco – GM Original Equipment Fuel Pump Tank Seal (Part No.E3004289666ACD)
from
$15.30
The ACDelco GM Original Equipment Fuel Pump Tank Seal is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Dorman – Fuel Pump Gasket (Part No.911-572)
from
$14.49
This fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles
- Restores functionality – reliable replacement for an original part that has failed due to fatigue or due for replacement during fuel pump tank service
- Durable construction – recommended for replacement when the fuel pump or sensor is replaced
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Fuel Cap: 10806, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10806)
from
$8.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Fuel Cap: 10646, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10646)
from
$10.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Fuel Pump Push Rod PR2584015 (Part No.PR2584015)
from
$20.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
ARP Auto Racing – Chrome Moly (Part No.134-8701)
from
$22.79
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you
Product Features:
See More
Product Features:
- Made From Premium Grade Aerospace Chrome Moly
- Center Less Ground To Precise Diameter
- Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
- Provide With Required Reliability And Improved Performance
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Popular 1973 Chevrolet Blazer Fuel and Emissions Systems Categories
1973 Chevrolet Blazer Fuel and Emissions Systems
You count on your 1973 Chevrolet Blazer to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 46 Fuel and Emissions Systems ranging in price from $1.49 to $299.99, you’re sure to find everything you need for your 1973 Chevrolet Blazer.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 13 different brands like Carquest Premium, Felpro, and Delphi. 1973 Chevrolet Blazer Fuel and Emissions Systems start as low as $1.49!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 996 extensive product reviews on 1973 Chevrolet Blazer Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are High-Flow Mechanical Fuel Pump for Street Performance with 4.0 stars and Locking Fuel Cap with 3.0 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1973 Chevrolet Blazer below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1973 Chevrolet Blazer
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1973 Chevrolet Blazer running right for years to come. In our inventory you’ll find brands like Carquest Premium, Felpro, Delphi, and even more.
Popular Dorman – Help Fuel and Emissions Systems
You’ll find popular Dorman – Help brand products across Vacuum Pumps. All are waiting to get your 1973 Chevrolet Blazer back on the road. Some of the top-rated Dorman – Help products in these categories are:
Top-Rated Mr. Gasket Fuel and Emissions Systems
If Mr. Gasket are what you’re looking for, our inventory holds plenty. We stock Mr. Gasket brand Fuel and Emissions Systems for your 1973 Chevrolet Blazer, and some of our most reviewed Mr. Gasket parts include:
FAQs for 1973 Chevrolet Blazer Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1973 Chevrolet Blazer?
Out of 46 Fuel and Emissions Systems for the 1973 Chevrolet Blazer, the most popular in our inventory are:
What are the top-rated 1973 Chevrolet Blazer Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1973 Chevrolet Blazer based on customer reviews/ratings are:
from
$124.99
(10)
High-Flow Mechanical Fuel Pump for Street Performance
“This pump fit my 55 Chevy with plenty of clearance. I’ve run it about 150 miles and had no issues.”
from
$65.99
(1)
Reducer w/O2 Sensor Fitting
“This product helps keep you legal. Easy installation and good price.”
