1972 Plymouth Roadrunner Drivetrains
More 1972 Plymouth Roadrunner Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1972 Plymouth Roadrunner, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1972 Plymouth Roadrunner Drivetrains
Powertrax – Grip PRO Traction System (Part No.GT436035)
from
$596.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
MOOG Driveline Products – Universal Joint Strap Kit (Part No.318-10)
from
$14.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 315G, 317, 319 & 457
- Contains two 1-1/2″ bolt center clamps and four 1/4-28 x 5/8″ cap screws
USA Standard Gear – Replacement Spider Gear Set For Dana 60, 35 Spline (Part No.39009)
from
$198.99
Product Features:
See More
- Spider gear kit
- Fits Dana Spicer 60, 35 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.315G)
from
$28.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)
from
$79.99
Seal housing for Dana 60, Zip locker, with o-rings.
Product Features:
See More
Product Features:
- Seal housing for Dana Spicer 60
- Includes o-rings
Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1410 U/Joint Size (Part No.41030)
from
$278.99
Yukon replacement yoke for Dana 60 and 70 with a 1410 U/joint size. 4.188″ snap ring span, 1.188″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1410 u-joint size
- 4.188″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- Strap style
Yukon Gear – 9.25" Pinion Gear Thrust Washer (Part No.33274)
from
$12.99
9.25″ pinion gear thrust washer.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Chrysler 9.25″ rear
Yukon Gear – Dana 60 & Dana 61 Tracloc Clutch Set (Part No.16156)
from
$269.99
Dana 60 & Dana 61 TracLoc clutch set.
Product Features:
See More
Product Features:
- Clutch kit
- Fit Dana Spicer 60 Trac Loc positraction
Yukon Gear – 8.75" Chrysler Outer Axle Seal, Use With Set7 (Part No.30199)
from
$15.99
8.75″ Chrysler outer axle seal, use w/set7.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear outer axle seal
- Fits Chrysler 8.75″ rear
- Tapered rolling bearing design only
Motive Gear – Differential Pinion Seal (Part No.5126B)
from
$9.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)
National – Bearings (Part No.LM104912)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Differential Pinion Yoke Assembly (Part No.697-545)
from
$313.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential end yoke matches the fit and construction of the original yoke
- Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
- Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
- Validated fit – this differential end yoke has been tested to confirm accurate fit
Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)
from
$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Powr Lok button kit
- Fits Dana Spicer 30, 44 and Chrysler 8.75″
Yukon Gear – Replacement Standard Carrier Case For Dana Spicer 60, 4.10 And Down (Part No.20030)
from
$299.99
Product Features:
See More
- Fits Dana Spicer 60
- 4.10 ratio and down only
- Fits standard open differentials only
Yukon Gear – Dana 60 Semi-Float C-Clip (Part No.33247)
Motive Gear – Differential Gear Install Kit (Part No.C8.75IKL)
Yukon Gear – Spindle Nut Retainer, 2.030" I.D., 8 Bent Over TABS (Part No.33480)
from
$8.99
Spindle nut retainer, 2.030″ I.D., 8 bent over tabs. This replaces Spicer part number 33733.
Product Features:
See More
Product Features:
- Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
- 2.030″ I.D.
- 8 bent over tabs
Yukon Gear – Replacement Crush Sleeve For Dana 60 (Part No.33089)
from
$8.99
Replacement crush sleeve for Dana 60, APROX 0.660″ long.
Product Features:
See More
Product Features:
- Crush sleeve for Dana Spicer 60
- 0.660″ tall
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – Chrysler 8.75" "89" Housing Nodular Iron Drop Out Case (Part No.32052)
from
$564.99
89 housing nodular Iron Drop Out case, up to 500 HP, Billet adjuster for 8.75″ Chrysler. This dropout does not come with fill plug (Part number CHY612017).
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″
- ’89’ case design
- Nodular iron for added strength
National – Bearings (Part No.205)
from
$20.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Felpro – Differential Carrier Gasket (Part No.RDS 6583)
from
$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)
from
$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Redi-Sleeve yoke saver
- Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
Yukon Gear – 1541H Alloy Rear Axle For Chrysler 8.75" (Part No.21408)
from
$284.99
Yukon 1541H alloy cut to fit rear axle for Chrysler 8.75″ measuring 28″-32″ with 30 splines and 5×4.5 bolt pattern. for use with A, C & E-Body. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. Must use Green bearing.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″
- 30 spline
- Cut to length design fits 28″-32″ applcations
- 5 x 4.5″ bolt pattern
Yukon Gear – Replacement Inner Slinger For Dana 60 (Part No.33014)
Yukon Gear – Extra HD Yoke For Chrysler 8.75" With 29 Spline Pinion And A 1350 U/Joint Size (Part No.41015)
from
$209.99
Yukon extra HD yoke for Chrysler 8.75″ with 29 spline pinion and a 1350 U/joint size. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″
- 29 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- U-bolt style
Popular 1972 Plymouth Roadrunner Drivetrains Categories
1972 Plymouth Roadrunner Drivetrains
You count on your 1972 Plymouth Roadrunner to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 345 Drivetrains ranging in price from $2.49 to $1,487.99, you’re sure to find everything you need for your 1972 Plymouth Roadrunner.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Valvoline, National, and Driveworks. 1972 Plymouth Roadrunner Drivetrains start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 3,925 extensive product reviews on 1972 Plymouth Roadrunner Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 5.0 stars and Universal Joint with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1972 Plymouth Roadrunner below to get started!
Top-Rated Drivetrains Brands For Your 1972 Plymouth Roadrunner
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1972 Plymouth Roadrunner running right for years to come. In our inventory you’ll find brands like Valvoline, National, Driveworks, and even more.
Popular Dorman Drivetrains
You’ll find popular Dorman brand products across Spindles. All are waiting to get your 1972 Plymouth Roadrunner back on the road. Some of the top-rated Dorman products in these categories are:
from
$4.99
(3)
Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm
Spindle Retainers
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1972 Plymouth Roadrunner, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1972 Plymouth Roadrunner Drivetrains
What are the most purchased Drivetrains for the 1972 Plymouth Roadrunner?
Out of 345 Drivetrains for the 1972 Plymouth Roadrunner, the most popular in our inventory are:
What are the top-rated 1972 Plymouth Roadrunner Drivetrains?
Top-rated Drivetrains for your 1972 Plymouth Roadrunner based on customer reviews/ratings are:
from
$10.49
(4)
Bearings
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
