1972 Plymouth Duster Differentials

Essential 1972 Plymouth Duster Differentials

USA Standard Gear – Open Spider Gear Set For Chrysler 8.25", 27 Spline (Part No.39002)

Open Spider Gear Set For Chrysler 8.25", 27 Spline

from

$209.99
USA Standard Gear open spider gear set for Chrysler 8.25″, 27 spline .

Product Features:
  • Spider gear kit
  • Fits Chrysler 8.25″ 27 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Minor Install Kit For Chrysler 70-75 8.25" Differential (Part No.12003)

Minor Install Kit For Chrysler 70-75 8.25" Differential

from

$36.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits 1975 and down Chrysler 8.25″
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Yukon Gear – Replacement Standard Carrier Case For Dana Spicer 60, 4.10 And Down (Part No.20030)

Replacement Standard Carrier Case For Dana Spicer 60, 4.10 And Down

from

$299.99
Product Features:
  • Fits Dana Spicer 60
  • 4.10 ratio and down only
  • Fits standard open differentials only
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

Replacement Carrier Shim Kit For Dana 60, 61 & 70U

from

$104.99
Product Features:
  • Carrier shims for Dana Spicer 60 and 70U
See More

USA Standard Gear – Spartan Locker For Chrysler 8.25" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17037)

Spartan Locker For Chrysler 8.25" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

from

$829.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits Chrysler 8.25″ with 27 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Yukon Gear – 8.25" Chrysler Notched Cross Pin (0.801" Diameter) (Part No.33433)

8.25" Chrysler Notched Cross Pin (0.801" Diameter)

from

$84.99
8.25″ Chrysler notched cross pin shaft for standard open carriers. (0.801″ diameter). This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers, or with factory Trac Loc positractions.

Product Features:
  • Cross pin shaft
  • Fits Chryler 8.25″
  • 0.801″ diameter
  • Notched
  • Not compatible with Spartan Lockers or Lock Rights
See More

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

from

$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:
  • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
See More

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

from

$13.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Powertrax – Lock Right Locker (Part No.1240-LR)

Lock Right Locker

from

$456.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.25" In A 4.11 Ratio (Part No.24004)

    High Performance Ring & Pinion Gear Set For Chrysler 8.25" In A 4.11 Ratio

    from

    $459.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

    Product Features:
    • Fits Chrysler 8.25″
    • 8.25″ ring gear diameter
    • 27 spline pinion
    • 10 ring gear bolts
    • 4.11 ratio
    See More

    Yukon Gear – Hardcore Diff Cover For Dana 50, Dana 60 & Dana 70 (Part No.32352)

    Hardcore Diff Cover For Dana 50, Dana 60 & Dana 70

    from

    $288.99
    Product Features:
    • Nodular iron for added strength
    • Thick design
    • Durable powder coat finish
    • Magnetic drain plug
    • Made in USA
    • High strength stainless steel fasteners
    See More

    Yukon Gear – Pinion Seal For 8.75" Chrysler Or For 9.25" Chrysler With 41 Or 89 Housing (Part No.30121)

    Pinion Seal For 8.75" Chrysler Or For 9.25" Chrysler With 41 Or 89 Housing

    from

    $13.99
    Pinion seal for 8.75″ Chrysler or for 9.25″ Chrysler with 41 or 89 housing.Yukon Mighty seal.

    Product Features:
    • Pinion seal
    • Fits Chrysler 8.75″ with ’41’ and ’89’ case housings and 2000 and down Chrysler 9.25″
    See More

    National – Bearings (Part No.M88010)

    Bearings

    from

    $10.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

    Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

    from

    $37.99
    Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

    Product Features:
    • Redi-Sleeve yoke saver
    • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
    See More

    Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)

    Seal Housing For Dana 60, Zip Locker, With O-Rings

    from

    $79.99
    Seal housing for Dana 60, Zip locker, with o-rings.

    Product Features:
    • Seal housing for Dana Spicer 60
    • Includes o-rings
    See More

    Yukon Gear – Replacement Trail Repair Kit For Dana 60 With 1310 Size U/Joint And U-Bolts (Part No.32282)

    Replacement Trail Repair Kit For Dana 60 With 1310 Size U/Joint And U-Bolts

    from

    $251.99
    Yukon replacement trail repair kit for Dana 60 with 1310 size U/joint and u-bolts. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).

    Product Features:
    • Fits Dana Spicer 60 and 70
    • 1310 u-joint size
    • Kit includes yoke, U-joint, pinion seal, pinion nut and washer, U-bolts and threadlocker
    See More

    Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

    Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

    from

    $8.99
    Product Features:
    • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
    • For Trac Loc positraction applications only
    See More

    Yukon Gear – Side Gear And Thrust Washer For 7.25" Chrysler (Part No.33279)

    Side Gear And Thrust Washer For 7.25" Chrysler

    from

    $69.99
    Side gear thrust washer for 7.25″ Chrysler.

    Product Features:
    • Side gear thrust washer kit
    • Fits Chrysler 7.25″
    See More

    Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)

    Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD

    from

    $5.99
    Product Features:
    • Outer oil slinger for Dana Spicer 60, 70, 70U and 70HD
    See More

    Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

    Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

    from

    $7.99
    Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

    Product Features:
    • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
    • 0.225″ diameter
    • 1.870″ long
    See More

    Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R8.25RMK)

    Differential Master Bearing Kit - Koyo

    from

    $109.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • KIT BRG&SL CHRY.MSTR 8.25
    See More

    Yukon Gear – Zip Locker For Dana 60 With 35 Spline Axles, 4.10 & Down (Part No.34022)

    Zip Locker For Dana 60 With 35 Spline Axles, 4.10 & Down

    from

    $1487.99
    The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years. This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

    Product Features:
    • Fits Dana Spicer 60 with 35 spline axles
    • 4.10 and down ratio only
    • Forged case and 8620 internals for added strength
    • Works with a variety of air delivery systems
    • Assembled in the USA
    See More

    Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

    Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

    from

    $67.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

    Product Features:
    • Powr Lok button kit
    • Fits Dana Spicer 30, 44 and Chrysler 8.75″
    See More

    Yukon Gear – 1541H Alloy Rear Axle For Chrysler 8.75" (Part No.21408)

    1541H Alloy Rear Axle For Chrysler 8.75"

    from

    $284.99
    Yukon 1541H alloy cut to fit rear axle for Chrysler 8.75″ measuring 28″-32″ with 30 splines and 5×4.5 bolt pattern. for use with A, C & E-Body. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. Must use Green bearing.

    Product Features:
    • Fits Chrysler 8.75″
    • 30 spline
    • Cut to length design fits 28″-32″ applcations
    • 5 x 4.5″ bolt pattern
    See More

    Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

    Replacement Baffle For Dana 60 & Dana 70-U

    from

    $6.99
    Product Features:
    • Oil baffle for Dana Spicer 60 and Dana Spicer 70U
    See More

    Yukon Gear – Zip Locker Soleniod Valve (Part No.34014)

    Zip Locker Soleniod Valve

    from

    $99.99
    Zip Locker soleniod valve.

    Product Features:
    • Solenoid valve
    See More

    1972 Plymouth Duster Differentials

    Maybe you’re in the middle of a full rebuild of that 1972 Plymouth Duster. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 258 different Differentials in our inventory ranging from $2.49 to $1,487.99. That means you can find the exact parts or products you need to keep that 1972 Plymouth Duster running smoothly.

    Differentials are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1972 Plymouth Duster. Driveworks, National, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1972 Plymouth Duster, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,000 reviews in this category, some of the top rated parts include Bearings with 4.8 stars and Bearings with 4.7 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1972 Plymouth Duster rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1972 Plymouth Duster Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1972 Plymouth Duster demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Duster the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Felpro Differentials

    We carry Felpro parts in our stock across Automatic Transmission Differential Carrier Gaskets categories, plus more. For a 1972 Plymouth Duster, our most popular Felpro Differentials include:
    Differential Carrier Gasket
    from $6.49
    (1)
    Differential Carrier Gasket
    Automatic Transmission Differential Carrier Gaskets

    Top 1972 Plymouth Duster Differentials from Driveworks

    Driveworks products are another trusted brand when it comes to Differentials for your 1972 Plymouth Duster. Popular Driveworks parts include:
    Taper Bearing Set
    from $10.29
    (38)
    Taper Bearing Set
    Differential Bearings
    Tapered Cone/Cup Wheel Bearing Set
    from $13.99
    (14)
    Tapered Cone/Cup Wheel Bearing Set
    Differential Bearings

    FAQs for 1972 Plymouth Duster Differentials

    What are the most purchased Differentials for the 1972 Plymouth Duster?

    Out of 258 Differentials for the 1972 Plymouth Duster, the most popular in our inventory are:
    Bearings
    from $16.99
    (25)
    Bearings
    Differential Bearings
    3 Qt - Penzoil 80W90 Conventional Gear Oil
    from $44.99
    This product is not rated
    3 Qt – Penzoil 80W90 Conventional Gear Oil
    Differential Oil
    Bearings
    from $15.99
    (9)
    Bearings
    Front Differential Pinion Bearings

    What are the top-rated 1972 Plymouth Duster Differentials?

    Top-rated Differentials for your 1972 Plymouth Duster based on customer reviews/ratings are:
    Bearings
    from $10.49
    (4)
    Bearings
    “Goes with M88010 bearing cup. Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
    Bearings
    from $18.79
    (3)
    Bearings
    “as advertised”
    Differential Crush Sleeve
    from $2.49
    (1)
    Differential Crush Sleeve
    “High quality, would buy again”