1972 Mercury Cougar Exhaust Parts
More 1972 Mercury Cougar Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1972 Mercury Cougar, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1972 Mercury Cougar Exhaust Parts
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Rear Exit – Pair (Part No.15807)
from
$196.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Felpro – Exhaust Manifold Gasket Set (Part No.MS 90291)
from
$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Taylor Gaskets – Header Gasket (Part No.66091)
from
$48.99
Header Gasket
Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10206-01)
from
$12.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Mahle – Exh. Manifold Gasket (Part No.A8112934749MAH)
from
$62.12
Exh. Manifold Gasket
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66014)
from
$51.99
Seal-4-Good Header Flange Gasket
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18230)
from
$95.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Walker – SoundFX Muffler, Universal/ Fabrication Needed (Part No.18113)
from
$90.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.42441)
from
$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – Sound Solution Muffler (Part No.18725)
from
$59.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, And spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance And favorable acoustics.
See More
Walker – SoundFX Muffler, Universal/ Fabrication Needed (Part No.18157)
from
$68.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Dorman – Help – Exhaust Stud Kit – 7/16-14 x 2-1/4 In. (Part No.03099)
from
$9.29
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- Durable steel construction
- New hardware helps fix exhaust leaks
- Also available in the Exhaust Manifold Hardware Kit
JBA Performance – 1655SJS 1 5/8" Header Shorty Stainless Steel 65-73 Mustang 351W Cable Clutch Silver Ceramic (Part No.1655SJS)
from
$1074.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1655SJS 1 5/8″ Header Shorty Stainless Steel 65-73 Mustang 351W Cable Clutch Silver Ceramic
- Mandrel bent stainless steel tube
JBA Performance – 1650SJT 1 5/8" Header Shorty Stainless Steel 65-73 Mustang 289/302 Titanium Ceramic (Part No.1650SJT)
from
$771.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1650SJT 1 5/8″ Header Shorty Stainless Steel 65-73 Mustang 289/302 Titanium Ceramic
- Mandrel bent stainless steel tube
Hooker Headers – Super Comp. Header (Part No.6209-1HKR)
from
$1500.00
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
JBA Performance – 1626SJS 1 1/2" Header Shorty Stainless Steel 94-97 Thunderbird/Cougar 4.6L Silver Ceramic (Part No.1626SJS)
from
$588.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1626SJS 1 1/2″ Header Shorty Stainless Steel 94-97 Thunderbird/Cougar 4.6L Silver Ceramic
- Mandrel bent stainless steel tube
JBA Performance – 1650S-2 1 5/8" Header Shorty Stainless Steel 65-73 Mustang 289/302 with GT40 P Cylinder Head (Part No.1650S-2)
from
$632.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1650S-2 1 5/8″ Header Shorty Stainless Steel 65-73 Mustang 289/302 with GT40 P Cylinder Head
- Mandrel bent stainless steel tube
Flowtech – Ceramic Header (Part No.32118FLT)
from
$490.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Patriot Exhaust – H8412 1 3/4" Full Length Header Ford Mustang 351C 71-73 Raw (Part No.H8412)
from
$309.99
Full length and fenderwell headers provide the ultimate performance for streetrodders with high performance engines. These header styles have longer primarytubes, which help produce more horsepower and torque than Tight Tucks. Chassisheaders fit inside
Product Features:
See More
Product Features:
- Patriot Exhaust H8412 1 3/4″ Full Length Header Ford Mustang 351C 71-73 Raw
- Full length headers are typically used for higher RPM horsepower, but can also increase the mid range torque in applications were there is room to fit a long tube design.
Walker – Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials (Part No.31622)
from
$17.99
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials (Part No.31378)
from
$10.49
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Exhaust Flange Gasket (Part No.256-1016)
from
$6.99
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Designed for a leak free connection
- OE structure and design
- Built to OEM specifications
- Secure gas-tight connection
Felpro – Exhaust Pipe Flange Gasket (Part No.8194)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60924)
from
$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60641)
from
$9.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.9609)
from
$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60201)
from
$10.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Popular 1972 Mercury Cougar Exhaust Parts Categories
1972 Mercury Cougar Exhaust Parts
You count on your 1972 Mercury Cougar to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 22 Exhaust Parts ranging in price from $3.49 to $619.99, you’re sure to find everything you need for your 1972 Mercury Cougar.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 9 different brands like Felpro, Dorman, and Flowmaster Inc.. 1972 Mercury Cougar Exhaust Parts start as low as $3.49!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 123 extensive product reviews on 1972 Mercury Cougar Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are Competition Header with 2.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1972 Mercury Cougar below to get started!
Top-Rated Exhaust Parts Brands For Your 1972 Mercury Cougar
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1972 Mercury Cougar running right for years to come. In our inventory you’ll find brands like Felpro, Dorman, Flowmaster Inc., and even more.
Popular Taylor Gaskets Exhaust Parts
You’ll find popular Taylor Gaskets brand products across Exhaust Gaskets. All are waiting to get your 1972 Mercury Cougar back on the road. Some of the top-rated Taylor Gaskets products in these categories are:
Top-Rated Exhaust Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Exhaust Parts for your 1972 Mercury Cougar, and some of our most reviewed parts include:
FAQs for 1972 Mercury Cougar Exhaust Parts
What are the most purchased Exhaust Parts for the 1972 Mercury Cougar?
Out of 22 Exhaust Parts for the 1972 Mercury Cougar, the most popular in our inventory are:
from
$9.29
This product is not rated
Exhaust Stud Kit – 7/16-14 x 2-1/4 In.
Exhaust Hangers and Hardware
from
$99.99
(2)
40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound
Mufflers
What are the top-rated 1972 Mercury Cougar Exhaust Parts?
Top-rated Exhaust Parts for your 1972 Mercury Cougar based on customer reviews/ratings are:
from
$619.99
(1)
Competition Header
“Received headers and general quality was poor at best. Several mars and scratches as if open box. The deal killer was collector exhaust pipe adapter”
